$100 - $150, Laboratory Supplies, Digi-Sense

98766-04 Traceable® Digital Stopwatch with Calibration; 500-Memory by Digi-Sense

This stopwatch/timer/chronograph displays time of day, date, day of the week and features a time-of-day alarm. As a stopwatch the unit acts as a single action, time out, cumulative split, interval split, continuous roll-over timing timer. Additional features include countdown alarm, countdown then count up alarm, countdown repeat, pacer, and stroke functions.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Water-resistant to seal out moisture, dust, and fumes
• Also displays the fastest, slowest, and average lap time

Includes

One 3 V cell button battery, lanyard, and NIST-traceable calibration certificate with data.

98766-13 Traceable Digital Benchtop Timer with Calibration by Digi-Sense

For single-action timing, press START/STOP key once to start timing, again to stop. Record time and clear display to zero for other timing modes. Or, press START/STOP key a third time before zeroing display for time-out and a fourth time for time-in. Unlimited time-outs/time-ins may be taken before zeroing display.

Cumulative split timing mode freezes the display for partial event times while the internal clock continues to run. Lap interval timing yields a readout of each individual time increment of a connected series of events. All functions may be triggered externally using test leads (included).

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Three 4 mm test leads allow external triggering of START/STOP and SPLIT/LAP/RESET
• Timer instantly rolls over to zero and continues timing up once it reaches 10-hr maximum

98766-05 Traceable Dual-Display Digital Stopwatch with Calibration by Digi-Sense

Stopwatch functions include single action, time out, cumulative split, interval split, and continuous roll-over timing with eight recallable memories, plus fastest and slowest lap times.

Set countdown time from 10 hours to 1 second. When zero is reached, timer alarms and repeats countdown from the programmed time. Repeat cycle automatically continues until stopped, and dual-line display shows how many times a program has been repeated.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Easily repeats last countdown time set after alarm, and shows how many times cycle has been repeated
• Water-resistant to seal out moisture, dust, and fumes

Includes

One 1.5 V button cell battery, lanyard, and NIST-traceable calibration certificate with data.

08683-05 Traceable® Large-Digit Radio Atomic Clock with Calibration by Digi-Sense

There is no need to set these atomic clocks as they automatically set correct time and date from NIST's atomic clock in Colorado. Select from PST (Pacific Standard Time), MST (Mountain Standard Time), CST (Central Standard Time), and EST (Eastern Standard Time). Simultaneously displays both ambient and remote temperature for easy comparison of room temperature versus outdoor temperature.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Traceable Large Digit Radio Atomic Clock with Ambient and Remote Temperature along with relative humidity for added versitility. This Atomic clock features signal reception includes four strength levels; RC sychronize process, weak signal quality, acceptable signal quality, and excellent signal quality. The weather forcase indicator includes; sunny, slightly cloudy, cloudy, and rainy along with ice alert with the outdoor temperature falls beween -2 and 3 degrees Celsius.

Features:

• Get accurate, reliable measurements with included NIST-traceable calibration
• Accurate to 1/10,000 of a second
• Measure relative humidity on main unit and remote with 1% resolution

Includes:

Desk stand, wall-mounting screws, batteries, and NIST-traceable calibration certificate with data.

94400-62 Traceable® Walkaway Count-Up Controller with Calibration; 0.01 sec to 99 hrs by Digi-Sense

Controllers perform reproducible stirring, heating, or pumping times. Used for timed shutdown or repeated on/off timing during any test. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal NiCd battery maintains programs in the event of a power outage. Three-pronged grounded receptacle relay for apparatus to 115 VAC, 115 amps, 1800 watts, and 1/3 horsepower.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94400-62 turn-off controller counts up and turns any piece of equipment off at the end of a set time period. Programmable in three interval settings: .01 second to 99.99 seconds, 1 minute to 9999 minutes, and 1 hour to 9999 hours.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Program setting in less than 5 seconds

Includes

NIST-traceable calibration certificate with data.

94400-64 Traceable® Walkaway Count-Up Controller with Calibration; 1 sec to 99 hrs by Digi-Sense

Controllers perform reproducible stirring, heating, or pumping times. Used for timed shutdown or repeated on/off timing during any test. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal NiCd battery maintains programs in the event of a power outage. Three-pronged grounded receptacle relay for apparatus to 115 VAC, 115 amps, 1800 watts, and 1/3 horsepower.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94400-64 repeat turn-on/turn-off controller counts up and turns any piece of equipment on for a programmed time and off for a different programmed time. Repeat features automatically continues cycling on and off programmed times ntil manually stopped. Programmable for separate on and off timing periods in three interval setting: 1 second to 99 seconds; 1 minute to 99 minutes, and 1 hour to 99 hours.

• Program setting in less than 5 seconds
• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.