Digital Thermometers, Digi-Sense

90000-37 Traceable® Big-Digit 4-Alarm Digital Thermometer with Calibration; Celsius by Digi-Sense

This thermometer has two temperature sensors-a built-in air sensor and an independent external probe sensor with 3 1/2 foot cable. The external probe can be used to monitor temperatures of liquids, air/gas, and semisolids.

Alarm configurations can be set up for four conditions: temperature above a setting, below a setting, between two settings, or outside two settings. A green or red light will blink and an audible alarm will sound when one of these conditions is detected. The alarm will sound every minute for 5 seconds until the temperature returns to a non-alarm condition or until the alarm is turned off.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Jumbo digital display is easy to read from a distance
• Remote, heat-resistant probe

Includes

Mounting tape, probe suction cup, built-in flipopen bench stand, one AAA battery, and NIST-traceable calibration certificate with data.

90000-75 Traceable® Indoor/Outdoor Digital Thermometer with Giant Dual-Display and Calibration by Digi-Sense

Thermometer includes a weatherproof remote sensor to measure remote and ambient temperatures at the same time. Dual display shows both indoor and outdoor temperature readings at the same time. Sits on desktop or can be wall mounted.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• F/°C selectable

Includes

Probe, one AAA battery, and NIST-traceable calibration certificate with data.

90001-02 Pen-Style Digital Pocket Thermometer; -58-302F/-50-150C by Digi-Sense

Thermometer has °>F/°>C switchable ranges and a one-second display update. Press data hold button to freeze readings. Use ON/OFF button to conserve battery life.

• Stainless steel penetrating probe holds up for years of use
• Rugged ABS plastic housing keeps display safe

Includes

Battery and stem cover.

90002-02 Traceable® Time and Date Digital Thermometer with Calibration; Bottle Probe by Digi-Sense

Ideal for monitoring temperature in the lab, home or office. Thermometer includes a remote probe with 6-ft (1.8m) cable to measure outdoor temperature and an internal sensor to measure indoor temperature. Display can be changed to show probe or ambient temperature, time of day, and month/day.

Thermometer can also display the exact time and date when the minimum and maximum temperature occurred. The temperature sensor performs accurately in most environments even including under water. Use rear stand to place unit on table or attach to wall via Velcro® strip or the two rear-mounted screw holes.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 90002-02 is supplied with special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle which protects it from rapid temperature changes when refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Simultaneously displays temperatures and time
• Wire mounting bracket permits easy probe placement

Includes

NIST-traceable calibration certificate with data and one AAA alkaline battery

90080-10 Traceable® Big-Digit See-Thru Digital Thermometer with Calibration; Fahrenheit by Digi-Sense

Attractive transparent body with large 1.2" digits LCD easily attaches to a window or piece of glass. Used to continually monitor temperature in storerooms, control rooms, fume hoods, laboratories, cleanrooms, refrigerators, plant areas, or just about anywhere else. It may also be attached to the outside of a window to view outdoor temperatures. Simultaneously displays current temperature and daily min/max readings. The thermometer automatically clears and updates the min/max reading daily.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data, mounting tape, hook and loop strips, and one AAA battery

90205-00 Long-Stem Digital Pocket Thermometer, 8" L, -58 to 302F/-50 to 150C by Digi-Sense

These thermometers are ideal for laboratory, field, and process measurements. Use to quickly verify termperature. Typical response time is 30 seconds for 99% of new reading. Thermometers have a 304 stainless steel penetration stem. All models include a protective case with pocket clip and a battery. Thermometer features a sealed case-ideal for use with liquids. It has °>F/°>C switchable ranges, a MIN/MAX button, and a one-second display update. Use ON/OFF button to conserve battery life.

Stainless Steel Stem, °F/°C switchable ranges, one-second display update in Celsius scale, and ten-second display update in Fahrenheit scale. Use ON/OFF button to conserve battery life.

90205-01 Traceable® Pen-Style Digital Thermometer with Calibration, High-Accuracy; 8" L, 302 F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Perfect-sized unit fits into flasks, cuvets, test tubes, and beakers. Read temperatures in foods, gases, samples, reagents, water baths, and semisolids. Stainless-steel probe is resistant to most laboratory chemicals. Long stem allows user to make measurements while stirring solutions in deep vessels. Almost unbreakable plastic and stainless-steel construction (no glass or mercury) makes it safe. Brilliant LCD is 1/4-inch-high. Designed for all ovens and incubators.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90205-02 Traceable® Pen-Style Digital Thermometer with Calibration, High-Accuracy; 11.5" L, 302F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Perfect-sized unit fits into flasks, cuvets, test tubes, and beakers. Read temperatures in foods, gases, samples, reagents, water baths, and semisolids. Stainless-steel probe is resistant to most laboratory chemicals. Long stem allows user to make measurements while stirring solutions in deep vessels. Almost unbreakable plastic and stainless-steel construction (no glass or mercury) makes it safe. Brilliant LCD is 1/4-inch-high. Designed for all ovens and incubators.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90205-03 Traceable® Digital Pocket Thermometer with Calibration; ±1°C accuracy by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Wide temperature range from -58 to 572°F (-50 to 300°C)
• Large, bright LCD with 3/8"H digits
• 4-3/4"L x 0.19" dia stainless steel stem fits nicely into included protective sleeve

Includes

Protective case with clip, battery, and NIST-traceable calibration certificate with data.

90205-04 Traceable® T-Bar Waterproof Food Thermometer with Calibration; ±1°C accuracy (-20 to 100°C) by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Waterproof (IP67 rating)-ideal for food and beverage applications and in washdown areas
• Rugged, shockproof and drop tested to withstand a fall of 5 feet (1.5 meters)
• °F/°C switchable

Includes

Battery and NIST-traceable calibration certificate with data.

90205-05 Traceable® Lollipop™ Water-Resistant Thermometer with Calibration; ±1.0°C accuracy (-20 to 100°C) by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Stainless-steel probe is resistant to most laboratory chemicals
• One-key operation recalls MIN/MAX temperature readings
• °F/°C switchable

Includes

NIST-Traceable calibration certificate with data, probe cover with pocket clip, and battery.

90205-10 Traceable® Pen-Style Digital Thermometer with Calibration, Key-Chain; 3" L, 300F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

These thermometers are ideal for laboratory, field, and process measurements. Use to quickly verify termperature. Typical response time is 30 seconds for 99% of new reading. Thermometers have a 304 stainless steel penetration stem. All models include a protective case with pocket clip and a battery. Thermometer features a chemical resistant stainless steel stem, plastic casing, protective case with key chain ring, battery and is F°/C° selectable. Key-chain "Mini" Thermometer is pocket sized and perfect for carrying around anywhere. Clip onto a lab coat, jacket zipper, belt loop, backpack or clip it to a key ring.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Digital display makes it easy to read

Includes

NIST-traceable calibration certificate with data.

90205-15 Traceable® Pocket Thermometer with Calibration; ±1.5°C accuracy by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Thermometer feature a chemical resistant stainless steel stem, plastic casing, protective case with pocket clip, battery and is F°/C° selectable. Thermometer has a unique, flat-profile design. Probe guard snaps into handle to extend the overall length to 10-3/4 inches (275mm) making it ideal for heard to reach applications such as HVAC grills and registers.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Unique flat-profile design
• Features MIN/MAX, HOLD, and selectable °F/°C
• NIST-Traceable

Includes

Probe guard, pocket clip, battery, and NIST-traceable calibration certificate with data.

90205-20 Traceable® Remote Probe Thermometer with Calibration; ±1.0°C accuracy (-20 to 100°C) by Digi-Sense

Magnetic back allows for placement on metal surfaces such as freezers, incubators, or water baths. Includes a flip-open stand for use on bench or desktop, and a spring fastener for clipping onto any edge.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Probe and cable may be totally immersed in liquid
• Readings update every second
• °F/°C switchable ranges

Includes

Probe, cable, flip-open stand, clip, magnetic back, battery, and NIST-traceable calibration certificate with data.

90205-21 Traceable® Deluxe Remote Probe Thermometer with Calibration; ±1.0° accuracy (-20 to 100°C) by Digi-Sense

Deluxe remote-probe thermometers feature high/low alarm, MIN/MAX, and HOLD. Magnetic back allows for placement on metal surfaces such as freezers, incubators or water baths. Includes a flip-open stand for use on bench or desktop, and spring fastener for clipping on to any edge.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Probe and cable may be totally immersed in liquid
• Readings update every second
• °F/°C switchable ranges

Includes

Probe, cable, flip-open stand, clip, magnetic back, battery, and NIST-traceable calibration certificate with data.

90205-22 Traceable® Water-Resistant Remote Probe Thermometer with Calibration; ±1°C accuracy (-20 to 100°C) by Digi-Sense

Water-resistant remote probe thermometer is perfect for wet areas-case is IP61 rated and shockproof, and probe is impervious to acid and solvents. Probe with 10-ft (3-m) flexible cord makes it easy to take temperature measurements in hard to reach areas. Supplied with suction cups, magnet, and Velcro® tabs to attach to any surface.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Display updates every second
• Features MIN, MAX, and selectable °F/°C

Includes

Probe, cable, suction cups, magnetic strip, Velcro® strips, battery, and NIST-traceable calibration certificate with data.

90205-24 Traceable® Remote Probe Digital Thermometer with Calibration; Stick-Style, Fahrenheit by Digi-Sense

Stick-Style Remote Probe Thermometers have a 3-ft flexible cord, Min/Max memory, and simultaneous display of probe and ambient temperatures. Meter is chemical-resistant and shockproof; comes with a remote sensor and cable that can be submerged. Use as a pocket thermometer or mount for continuous use with the supplied self-adhesive Velcro® tabs.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90205-25 Traceable® Robo™ Thermometer with Calibration; ±1.0 accuracy (-20 to 100°C) by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Piercing-tip probe is ideal for measuring foods, liquids, and semisolids
• Extra long 8" (200 mm) stem is ideal for measuring reagents, water baths, air and liquids
• °F/°C switchable

Includes

NIST-Traceable calibration certificate with data, probe case with clip, and battery.

90205-26 Traceable® Panel-Mount Remote Probe Thermometer with Calibration; -50-300C/-58-572F by Digi-Sense

Panel-mount Remote Probe Thermometer features a 10-ft flexible cord for measuring temperatures from a distance. Versatile panel-mount module snaps into place or can be used as a stand-alone unit. Model has an large easy-view LCD display, and records minimum and maximum readings over time.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90225-15 Traceable® Pen-Style Digital Thermometer with Calibration; 8" L, 302F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Stainless Steel Stem, °F/°C switchable ranges, one-second display update in Celsius scale, and ten-second display update in Fahrenheit scale. Use ON/OFF button to conserve battery life.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90225-39 Traceable® Triple-Display Digital Clock/Timer with Calibration by Digi-Sense

Triple-display clock/timer features three channels, a count up stopwatch, 500-lap memory, and a clock. All three channels can be operated simultaneously. Memories of all channels can be recalled together. Stopwatch counts up to 24 hours with 0.01-second resolution. Countdown range is 20 hours; countdown and clock functions have a 1-second resolution. Timer counts up to show time elapsed since the alarm.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Accurate, reliable measurements with included NIST-traceable calibration
• Get timing faster-recall all channels' settings instantly
• Use as a countdown timer, count up stopwatch, or clock
• Count up to 24 hours, count down to 20 hours
• Displays time elapsed since alarm

Includes

NIST-traceable calibration certificate with data, magnetic clip, and one AAA battery.

94460-07 Traceable® Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bottle Probe by Digi-Sense

Easily monitor temperatures overnight or for any time period minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Thermometer comes with a bottle probe filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

Glass bottle probe with 10-ft cable, flip-open stand, Velcro® strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

94460-09 Traceable® Excursion-Trac™ Data Logging Thermometer with Calibration; 2 Bottle Probes by Digi-Sense

Easily monitor temperatures overnight or for any time period minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Thermometer comes with bottle probes filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

Glass bottle probes with 10-ft cable, flip-open stand, Velcro® strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

94460-11 Traceable® Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bullet™ Probe by Digi-Sense

Easily monitor temperatures overnight or for any time period minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Use included Bullet probe to measure air and liquid temperatures. Sensor measures 3/4"L x 0.187" dia.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display shows high, low, and current temperature simultaneously
• Probe and cable are submersible

Includes

Bullet probe with 10-ft cable, flip-open stand, Velcro® strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.