$2000 - $4000, Crowcon Gas Monitors

Vortex 4-Channel Control Panel for Gas and Fire Monitoring

Crowcon Detection Instruments consistently produces the best gas detection and monitoring devices in the industry. Around the globe, companies and workers enjoy higher standards of safety when they purchase and implement a product by Crowcon. With many years of research and development under its belt, Crowcon continuously works to advance its product offerings by utilizing the latest technology in gas detection. The Vortex 12-channel control panel for gas and fire monitoring is one of the most versatile and compatible control panels on the market with its ease of use and ease of customization.

Easy to Use

The Vortex control panel requires very little training. The unit is incredibly easy to use and simple to understand. All of the day to day operations are easily accessible through push buttons on the front panel, and while the display panel continuously shows necessary information, the LEDs only illuminate when a hazard or fault is detected. This allows users to quickly check the conditions with a mere glance. The Vortex is also incredibly easy to service and maintain. Replacement parts simply plug into the unit, and the interior of the panel was designed for easy access for cable termination. The zones within the unit are compartmentalized so that a user may work on one part of the unit without disabling the entire control panel.

Maximum Flexibility

Crowcon understands the economics of efficiency. When designing the Vortex 12-channel control panel, the company worked to create a product that would be optimally compatible with existing equipment and infrastructures. The Vortex can be configured to match any and all site requirements with minimum wiring. The control panel may also be factory set with specific requirements, easing the installation and training process. These settings may be adjusted at any time by a PC using Vortex software. The panel also uses industry standard communication links and can be simply integrated with existing control systems.

Reliable and Safe

The Vortex has been tested for numerous environmental hazards and is rated IP65 for dust and water ingress. To improve safety measures, all of the relays are monitored continuously. In this manner, faults are immediately identified. This helps to protect the integrity of the device and the safety of the users. The unit also continuously monitors its power supply. If power were to fail, the control panel would switch to its internal batteries which are also continuously monitored. For years, Crowcon has developed its reputation for manufacturing safe and reliable gas detection equipment. In turn, the Vortex control panel enjoys some of the highest safety standards in the industry.

Specifications

The Vortex has dimensions of 18.5 x 12 x 6.5 inches. Enclosed in aluminum and plastic, the wall mounted control panel houses up to 12 channels and utilizes IP65 ingress protection. The unit also has datalogging capabilities. The panel displays several indicators:

• Channel number
• Gas reading
• Measurement units
• Power
• Battery status
• Run/hold indication
• Channel test mode
• System fault/integrity
• Color coded visual alarms and audio alarms

2426-1 IR Flame Detector (20/20R) by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

GPF-0005-NU-A Gas-Pro IR 4-Gas Confined Space Entry Monitor, CL2/O2/LEL IR CH4/PID, Non Pumped, includes Flow Plate and Multi Region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

GPF-0003-NU-A Gas-Pro IR 5-Gas Confined Space Entry Monitor, Dual CO+H2S/O2/LEL IR CH4/PID - Non Pumped, includes Flow Plate and Multi Region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

GPF-0004-NU-A Gas-Pro IR 4-Gas Confined Space Entry Monitor, SO2/O2/LEL IR CH4/PID, Non Pumped, includes Flow Plate and Multi Region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

GPF-0006-NU-A Gas-Pro IR 4-Gas Confined Space Entry Monitor, O3/O2/LEL IR CH4/PID, Non Pumped, includes Flow Plate and Multi Region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

GPF-0007-NU-A Gas-Pro IR 4-Gas Confined Space Entry Monitor, NH3/O2/LEL IR CH4/PID, Non Pumped, includes Flow Plate and Multi Region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

GPF-0008-NU-A Gas-Pro IR 4-Gas Confined Space Entry Monitor, NO/O2/LEL IR CH4/PID, Non Pumped, includes Flow Plate and Multi Region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

GPF-0009-NU-A Gas-Pro IR 4-Gas Confined Space Entry Monitor, NO2/O2/LEL IR CH4/PID, Non Pumped, includes Flow Plate and Multi Region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

TP-AAAGCCCN-A-001-B Triple Plus+ Portable 4-Gas Monitor, CH4 % LEL, O2, CL2, H2S, Non-pumped, Li ION Battery,UK ATEX by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

1667-1 Gasmonitor Plus 24 V 750 W Power Supply 100-260 V AC by Crowcon

Gasmonitor Plus is our flexible microprocessor controlled system designed with a modular approach, so you get exactly what you want.

Used throughout the world, both on and offshore, Gasmonitor Plus provides the cost effective solution to your system requirements. Gasmonitor Plus, the gas and fire control system you can trust.

Simple to use

• Gasmonitor Plus offers flexibility whilst still providing simple operation. All the day to day functions are accessible via push buttons on the front panel.
• As well as a rolling display, indicating the channel currently monitored, each channel has a bar graph display. This unique bar graph format is ranged to indicate readings below the first alarm setting, providing an instantaneous representation of the gas concentration on every detector.
• Common alarm LEDs on the display card and individual alarms on the panel only light when a hazard or fault is detected. This means the whole rack status can be checked at a glance.

Flexible architecture

• Each channel has three levels of alarm as well as a dedicated analogue output, set as 4-20 mA as standard.
• Optional relay modules can interface to the panel to provide up to a total of 84 output relays per rack. Sixteen of these relays can be configured/voted from a combination of the three levels of alarm per channel.
• The RS232 digital interface provides connectivity with PC for configuration, monitoring and datalog upload. Each rack is uniquely addressable, making multi-drop architectures possible. This cuts down on configuration and monitoring cabling.

Ground breaking design

• Gasmonitor Plus is a microprocessor based expandable control system, which can be multiplied to offer unlimited channels and outputs.
• Its modular construction provides ultimate customisation capacity with minimal wiring.
• Gasmonitor Plus has industry standard analogue outputs, and the mechanical design is based on 19 Eurorack. This means that the Gasmonitor Plus will integrate fully with existing rack mounted protection systems on site.
• The alochrome finish and rack screening plates ensure that the Gasmonitor Plus is impervious to radio frequency interferance.

Easy maintenance

• Gasmonitor Plus has been designed with easy servicing and maintenance in mind.
• Each channel is inhibited separately so that plant safety is not compromised during maintenance checks.
• Routine calibration can be achieved from the front panel. The one man calibration feature reduces the service overhead by half.
• One universal gas card architecture controls all gas detectors. This reduces the spares holding required for Gasmonitor Plus maintenance. Each control card is fitted with its own dedicated micro-controller so it can function independently in the event of a single point failure.

2010-1 UV/IR Flame Detector (20/20L) by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

2060-1 UV Flame Detector (660) - Aluminium by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

2087-1 UV Flame Detector (20/20U) by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

2364-1 UV/IR Flame Detector with Automatic Self-Test (20/20LB) by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

Gasmaster Control Panel for Gas and Fire Monitoring

Crowcon Detection Instruments is a global leader in gas detection and safety equipment. With over 40 years of experience in research and technology, Crowcon is consistently leading the industry in design innovation. By integrating historical successes with advances in modern technology, Crowcon is able to consistently produce high quality products that meet today s challenging environments.

The Gasmaster is an innovative self-contained control panel that monitors gas and fire hazards. Its exclusive features allow the control panel to be flexible enough to fit most industrial applications. More importantly, its outstanding performance and leading technology make this panel an industry leader.

Exclusive Gasmaster Features

Crowcon sGasmaster contains numerous features that outperform the competition in gas detection and safety standards:

• Easy to use control features
• Easy to read backlit LCD display
• Unparalleled flexibility and compatibility with existing equipment
• Reliable alarm and safety features

Easy to Use

The Gasmaster is incredibly easy to read and operate. The front mounted display simultaneously broadcasts all of the appropriate gas levels while indicating the system status check. The front panel also houses the buttons that control the systems operations. All features of the Gasmaster, including recalibration, can be controlled by these easy to operate keys. With the simple push of a button, any user can easily operate the system s features. The Gasmaster s system s software was also designed with ease of use in mind. The software enables reconfiguration and datalogging instantaneously and requires minimal training.

The backlit LCD display screen provides all of the necessary safety information without overwhelming the user. Utilizing a large clear screen, the alphanumeric display reads the gas levels, displays the system status, and illuminates an alarm bar when necessary.

Flexible and Adaptable

The state of the art Gasmaster is incredibly versatile and flexible. The unit can monitor and control virtually any combination of gas and fire detectors. The unit also offers a variety of outputs

Gasmaster Control Panel for Gas and Fire Monitoring

Crowcon Detection Instruments is a global leader in gas detection and safety equipment. With over 40 years of experience in research and technology, Crowcon is consistently leading the industry in design innovation. By integrating historical successes with advances in modern technology, Crowcon is able to consistently produce high quality products that meet today s challenging environments.

The Gasmaster is an innovative self-contained control panel that monitors gas and fire hazards. Its exclusive features allow the control panel to be flexible enough to fit most industrial applications. More importantly, its outstanding performance and leading technology make this panel an industry leader.

Exclusive Gasmaster Features

Crowcon sGasmaster contains numerous features that outperform the competition in gas detection and safety standards:

• Easy to use control features
• Easy to read backlit LCD display
• Unparalleled flexibility and compatibility with existing equipment
• Reliable alarm and safety features

Easy to Use

The Gasmaster is incredibly easy to read and operate. The front mounted display simultaneously broadcasts all of the appropriate gas levels while indicating the system status check. The front panel also houses the buttons that control the systems operations. All features of the Gasmaster, including recalibration, can be controlled by these easy to operate keys. With the simple push of a button, any user can easily operate the system s features. The Gasmaster s system s software was also designed with ease of use in mind. The software enables reconfiguration and datalogging instantaneously and requires minimal training.

The backlit LCD display screen provides all of the necessary safety information without overwhelming the user. Utilizing a large clear screen, the alphanumeric display reads the gas levels, displays the system status, and illuminates an alarm bar when necessary.

Flexible and Adaptable

The state of the art Gasmaster is incredibly versatile and flexible. The unit can monitor and control virtually any combination of gas and fire detectors. The unit also offers a variety of outputs

Cirrus Infrared Flammable Gas Detector

Crowcon Detection Instruments operates worldwide with the mission to protect people and plant from gas hazards. With over 40 years of gas detection experience, Crowcon consistently develops cutting edge technology and detection systems that are reliable and innovative. The company offers a wide range of gas detection devices to suit a variety of personal and industrial gas detection needs.

With its lifetime factory calibration and 5 year guarantee, Crowcon is pleased to introduce its rugged and reliable Cirrus gas detector. Cirrus is Crowcon s third generation fixed point infrared flammable gas detector. The unit requires very little maintenance and has a fully automatic remote functional test capability that does not require local detector checks. Additionally, the unit is flexible enough to interface with a variety of new or existing systems.

Rugged and Reliable

When in potentially hazardous environments, workers need to feel safe and secure with their equipments integrity and reliability. The Cirrus infrared flammable gas detector provides that assurance. The unit features two beams for accurate readings and detection. One beam is utilized as the baseline and continuously checks the operation of the optics while providing a continuous zero measurement for the hydrocarbon detecting beam. Through this mechanism, drifts in the infrared source are compensated. The unit is housed in a durable stainless steel case that provides optimal protection from the elements and hazardous working conditions. Additionally, Cirrus is guaranteed for 5 full years.

Low Maintenance

One of the most important characteristics of the Cirrus infrared flammable gas detector is its low maintenance requirements. First and foremost, the docking station for the unit allows for easy installation and system changes. Once installed, configuration changes are easily made by connecting a computer to the control room. This also allows for easy field configurations. Cirrus also features a factory calibration that will last for 5 years. It will never require a zero or span gas calibration. The unit also operates up to 90% obscuration. When the device reaches the preset obscuration level, it will notify users that it is time for a cleaning.

Flexibility

Cirrus can be fitted with a number of accessories, testers, and interfaces to improve performance and customization. A fitted automatic drop-in filter would alleviate manual or local functional testing. Other interfaces would allow for easy testing when the device is inaccessibly located. The device may also be outfitted with accessories and interfaces that increase its compatibility with existing field cabling and control panels. The unit can easily interface with new, existing, or distributed control systems. Each control system may require a separate, but easy to install, compatibility accessory for optimal performance.

Specifications

• The unit detects hydrocarbon gases in the 0-100% LEL range by infrared absorption.
• Utilizes a dual beam, dual wavelength, and dual detector optical system.
• The entire device is approximately 9.5 x 5.2 x 7 inches.
• Response time of less than 10 seconds.
• Weighing in at 15.4 pounds, this stainless steel detector is operational in temperatures ranging from -40 degrees Fahrenheit to +149 degrees Fahrenheit and in humidity conditions between 0 and 99%.