Portable, Crowcon Gas Monitors, Crowcon

TRU-03-NU-Z-IR Triple Plus + IR Portable 2-Gas Detector, IR CH4 % LEL, O2 Non-pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

TRU-03-NU-Z/K Triple Plus+ Portable 3-Gas Monitor Kit, CH4 % LEL, O2, CO Non-pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Kit Includes:

• Triple Plus+ Portable 3-Gas Monitor, Non-pumped with the standard accessories
• Communications software
• Computer lead
• Charger/interface and carrying (brief) case with foam liner

TRU-04-NU-Z Triple Plus+ Portable 2-Gas Monitor, CH4 % LEL, O2, Non-pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

TRU-04-NU-Z-IR Triple Plus + IR Portable 2-Gas Detector, IR CH4 % LEL & % vol., O2 Non-pumped by Crowcon

Incorporating infrared detection technology, the Triple Plus+ IR extends the capability of the Triple Plus+ allowing extended life detection of hydrocarbons and carbon dioxide.

IR sensors have high resistance to interference or inhibition by other gases and are suitable for both high gas concentrations and use in inert (oxygen free) backgrounds.

The unique design of the Crowcon IR sensor module used in Triple Plus+ IR allows measurement of hydrocarbons at both % LEL and % vol. ranges making this instrument ideal for tank and line purging applications within oil and gas and industrial applications.

Clear and unambiguous

• Piercing 85dB at 1m
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed datalogging with 100 hour capacity
• Gives you confidence in the status of your Triple Plus+, and the environment you re working in

Simple to customise

• Wide range of electrochemical oxygen and toxic gas sensors
• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names
• Allows you to create your optimum 4 gas Triple Plus+

Durable

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy
• System integrity and operation assured
• Makes recovery from water possible

Easy to maintain

• Simple Windows Software interface
• QuickCal, rapid calibration
• User menus allow calibration with or without connecting to a PC

IR Option

• No poisoning effects
• Long life sensor and no burnout
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO2 detection, 0 5%
• Works well where catalytic pellistors would perform poorly
• Reduced cost of ownership
• Offers flexibility

TRU-04-NU-Z/K Triple Plus+ Portable 2-Gas Monitor Kit, CH4 % LEL, O2 Non-pumped by Crowcon

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas portables.

Today's TriplePlus+ builds on this pedigree by inclusion of unique LIBRA lithium-ion battery technology and the option of infra-red (IR) sensors for the measurement of flammable hydrocarbons or carbon dioxide.

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Benefits

• Simple customisation to alternative flammable gas correction factors
• Wide range of sensor types allowing 4 gas detection
• QuickCal simple rapid calibration
• Peak hold capability for pre-entry checks

Rugged construction

• Triax casing will not crack or shatter when dropped
• Unique internal design will resist the harshest treatment
• Full buoyancy makes recovery from water possible

Flexible

• Available for diffusion, manual aspiration or pumped sampling
• Interchangeable sensor modules
• Comprehensive datalogging with site and user names

Convenient and simple to use

• Large four channel simultaneous gas display
• Piercing 85dBA @ 1m
• Ultra bright LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Simple Windows software interface

Kit Includes:

• Triple Plus+ Portable 2-Gas Monitor, Non-pumped with the standard accessories
• Communications software
• Computer lead
• Charger/interface and carrying (brief) case with foam liner

Tetra 3 IR Multigas Personal Monitor with Charger by Crowcon

The Tetra:3 multi-gas monitor is a compact, robust and easy to use diffusion based detector.

Single button operation, small size and clear top-mounted display make it a favourite in the market amongst those working in demanding industrial environments such as those in the water, telecoms, food, brewing or hydrocarbons sectors.

Despite its compact size the Tetra:3 is ultra-rugged and water proof.

• Up to 4 gases in a small and lightweight design
• Infra-red carbon dixoide sensor version for safe area use (ie non-explosion risk areas)
• Single button operation for all functions, can be operated with gloved hands
• Rugged impact resistant design provides extra shock and vibration protection
• Reliable Lithium-ion battery provides over 16 hours continuous operation from a single charge with no memory effects.
• Water and Dust resistant to IP67, can be submerged in water
• Rapid and effective warning with a 95 dBa audible alarm, an extremely bright red/blue visual alarm and vibrating alarm as standard.
• Top mounted, backlit display of all gas readings, diagnostics and battery life.

Gases include the most common four (carbon monoxide, methane, oxygen and hydrogen sulphide), but also an expanded range: ammonia, ozone, sulphur dioxide, H2 filtered CO (for steel plants) and IR carbon dioxide (for safe area use only).