Fieldpiece

JL3RH Job Link Probe-Flex Psych by Fieldpiece

The JL3RH Job Link® System Psychrometer Probe has a long flexible wand and strong sliding magnet for easy measurements anywhere on the system. Get instant live readings from ducts, plenums, registers, or grilles for accurate diagnostics.

• Place in critical locations based on system needs
• Requires only 3/8" hole for duct testing
• Return and supply indicator switch
• Measures dry bulb, wet bulb, %RH, dew point, and enthalpy
• Add multiple psychrometers for system wide testing in real time

MR45 Recovery Machine by Fieldpiece

The Fieldpiece MR45 has onboard system monitoring that adjusts motor performance to handle liquid and run twice as fast on vapor. MR45 also steps up low voltage at the power plug to deliver full power to the motor where high voltage drop is a problem.

With a powerful 1HP motor and super-sized condenser, this machine excels on longer and hotter jobs. The easy-to-read display, lightweight (22lbs), straight hose connection ports, and single dial make this machine user-friendly while being tough enough for everyday use, even in the rain.

• Extra large condenser
• Easy access ports
• Long life, low friction ceramic coated cylinders
• Dual cylinder compressor
• Easy hose connections and built in power cord storage
• Large backlit display with status messages

JL3KH6 Job Link Kit-Charge and Air by Fieldpiece

Take a full system snapshot quickly and easily with the JL3KH6 Charge and Air Test Kit. This kit consists of 2 pressure probes, 2 pipe clamps, and 2 psychrometers in a quick access padded case. All measurements can be sent up to 350' away directly to your mobile device with the Job Link™ app. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers' flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with Job Link™ probes!

Powerful Wireless Signal Strength

• Up to 350' wireless signal
• Powerful enough to go through most walk-in coolers and freezers
• Directly transmits to your mobile device

Rapid Rail™ Sensor Advantages

• Stabilizes in under 5 seconds
• Beeper and LED indicate accurate connection
• The Rapid Rail™ sensor uses pipe to complete circuit so ambient conditions don't affect the measurement
• Narrow jaw connects in tight spaces and on irregular pipe shapes

Reliable Pressures Regardless of Location

• 45° angled fitting easily connects in tight spaces
• Pressure sensors are accurate at any elevation
• Calibrates automatically when powered on

Configurable Psychrometric Testing

• Probes measure return and supply for grilles and registers
• Place at multiple locations based on system requirements
• Long flexible probe with sliding magnet for easy placement on system
• Narrow tip fits in 3/8" holes or larger
• Real time enthalpy and delivered BTUs

SSX34 Superheat & Subcooling by Fieldpiece

Most non-electrical HVACR problems are charge related. Many systems in operation are undercharged or overcharged. This can cause decreased efficiency and compressor failure. The higher the efficiency of a system, the more critical it is that it is charged properly.

The Fieldpiece Superheat and Subcooling for Air Conditioning and Refrigeration meter, model SSX34, measures suction line, or low side, line temperature and pressure. It then calculates actual superheat in real time using built in P/T charts. It also measures liquid line, or high side, line temperature and pressure, and calculates actual subcooling. Use it to get actual superheat on R-22, R-410A, R-134A, and R-404A fixed orifice systems and actual subcooling on TXV / TEV regulated systems.

Use the "T" fitting to charge to actual superheat or subcooling by putting the SSX34 in-line between your refrigerant bottle and the system. Use it to monitor superheat and subcooling when recovering too.

• Measures suction/liquid line pressure and temperature to calculate and display superheat/subcooling
• Display pressure in PSI or kPa
• Display temperature in °F or °C
• Display superheat in °F or °C
• Display subcooling in °F or °C
• Compatible Refrigerants: R 134A, R 404A, R 410A, R 22
• Includes "T"
• Accepts K-type thermocouples. ATC1 included
• Magnetic hanger
• Thermocouple calibration pot on meter face
• Atmosphere pressure calibration

Competitive Advantages

Many AC system analyzers include PT charts you don't want or need. The SSX34 gives you actual superheat and subcooling in real time like the expensive analyzers do in a rugged, compact design. The SSX34 constantly displays refrigerant line pressure, toggles between line temp actual superheat, and actual subcooling for four of the most common refrigerants found in HVAC/R field service. If need you need more refrigerants in your daily work, check out the HVAC GUIDE® System Analyzer (link to HVAC GUIDE PRODUCT PAGE), models HG2 or HG3, and the ASX14 for a system analyzer and then some. P/T charts for 12 of the most common refrigerants you use in HVACR are included, as well as the software and firmware to generate for printable work orders for customers. For even easier refrigeration testing take a look at the ATC1R pipe clamp especially designed to fit smaller refrigerant lines.

Includes

• Real-time Superheat and Subcooling for A/C and Refrigeration - SSX34
• Pipe-Clamp Thermocouple 3/8" to 1 3/8" for Air Conditioning - ATC1
• 9V Battery (installed)
• Operator's Manual

SRL2K7 Infrared Refrigerant Leak Detector by Fieldpiece

Like all of Fieldpiece's test instruments, the SRL2 Infrared Refrigerant Leak Detector is designed exclusively to make the HVACR Technician's job easier, faster, safer and more efficient. We set out to develop the best refrigerant leak detector for HVACR. We believe the SRL2 is it. And now it comes in kit form in a rugged, blow-mold case with all of the extras.

The ergonomic design fits naturally in your hand. The ruggedized construction stands up to abuse most other leak detectors can't handle. The eight-hour battery life lets you work all day before recharging and the included vehicle and wall chargers help you during overtime. The mute and peak functions allow you to work the way you want to work. The magnetic hanger helps keep the detector out of the way when repairing a leak, but visible enough so you won't leave it on the job.

Advantages Over Other Types of Refrigerant Leak Detectors

• Triggers on all CFCs, HFCs, HCFCs and blends.ABMK3_w_SRL2
• Sealed sensor. Unlike heated diode and corona discharge leak detectors, the sensor doesn't "touch" refrigerant as it passes through the instrument. Heated diode and corona discharge units tend to degrade or fail when they come in contact with high concentrations of refrigerant or touch liquid.
• Doesn't trigger on oil or moisture like other types of detectors.
• Senses change in refrigerant levels. Works even in contaminated environments.
• Up and running in less than 30 seconds. Some heated elements and corona discharge units take much longer to warm up. UV dyes can take several hours to travel through a running system and can degrade system components.

Designed for HVACR

• Superior - Controlled Sensitivity. Doesn't trigger on nuisance leaks unless in Turbo Mode.
• Rugged / Ergonomic Features. Ruggedized boot and it fit's in your hand.
• Infrared Sensor. Lasts up to 10 years.
• Three Sensitivity Levels. Meets new SAE standards.
• Audible/Visual Alarm. Turn the beep on or off - you decide.
• 8-hour Battery Charge. Work all day on one charge.
• Non-conductive, Sturdy Probe. Stays where you want it.
• Peak / Mute Buttons. Find leaks in noisy environments.
• Magnetic Hanger. Hang the unit while you repair the leak.
• Weighs 14-oz. Tough doesn't have to mean heavy.

Includes

• Advanced Refrigerant Leak Detector - SRL2(K7)
• (5) O-rings and 10 Replacement Filters - RFL2
• 9-inch Flex-Probe Extension - RFE2
• Rigid Extension Probe - RRE2
• Blow-Molded Case - ABMK3
• Operator's Manual

SIG1 Gun Style IR Thermometer by Fieldpiece

Among our most popular IR thermometers the SIG2 Gun-Style Thermometer features a 10:1 field of view. A bright blue backlight and laser guide make taking fast and accurate temperature readings easier, better and faster. The SIG1 comes with a protective lens cap and body wrap. It works faster than thermistor-based temperature instruments and has a range of -22°F to 1022°F. Includes Auto-Power Off to conserve battery life.

LT17A Digital Multimeter by Fieldpiece

This manual ranger covers the parameters and ranges you need for most HVACR applications. The LT17A meter measures current, resistance, voltage, capacitance, frequency, continuity, and temperature. Test leads store in the meter body and, with the probe tips removed, connect to any Fieldpiece accessory head. The body is made out of durable ABS plastic and comes with a bright blue backlight for poorly lit test areas. Get great accuracy using the included k-type thermocouple and an easily accessible temperature calibration pot.

The testing capabilities packed into this classic style meter is its main competitive advantage. In addition to all of the ranges, it has direct temperature measurement and works with all of our accessory heads to make it one of the most complete classic style meters available for HVACR professionals.

• Works with Fieldpiece Accessory Heads
• Continuity Indicator
• 400 AAC with included clamp
• Capacitance up to 200MFD
• Temperature up to 1400 degrees F
• Microamps DC - Flame Rectification Tests
• Frequency
• Silicone Leads with Detachable Probe TipsLTCaseStand
• Tilt Stand and Magnetic Hanger
• Bright Blue Backlight
• MAX/MIN hold
• Record the minimum or maximum reading during a measurement. To exit the MIN/MAX function, hold the button for more than 2 seconds
• Volts AC
• Volts DC
• Resistance (Ohms)
• Diode Test
• Rugged ABS case with rubber boot
• Even though it's a classic style meter it still fits naturally in your hand
• Auto power-off (APO) to conserve battery life

Includes

• Classic Style Clamp Meter with Temperature - LT17A
• Deluxe Silicone Test Leads - ADLS2
• 400A Amp Clamp Accessory - ACH4
• Wrap Tab Bead Tip Thermocouple - ATB1
• Short Alligator Lead Extensions - ASA2
• Mail Pouch-Style Instrument Case - ANC5
• 9-Volt Battery (installed)
• Operator's Manual

SC460 Clamp Meter-Wireless by Fieldpiece

The new SC460 and SC660 wireless clamp meters team up with the Job Link system to provide even more in-depth testing, diagnostics and reports.

Clamp readings are wirelessly sent to the Job Link System via the long range JL2 Transmitter. Email reports and store them in the cloud for future reference.

Plus, now you can document both power and system efficiency (SEER and EER) in Job Link with the wireless clamps and wireless psychrometer.

• 3-Phase Rotation Testing with Two Leads
• Record Motor Start up with Inrush Current
• Non-contact Voltage and One Handed Testing
• Backlit Display
• Strong Magnetic Hanger
• Swivel-head, Lead Storage, and Jaw Light (SC660)
• DC Amps (SC660)
• Dual Temp for Delta-T Calculations (SC660)

JL3PR Job Link Probe-Pressure by Fieldpiece

Easily access service ports at odd angles and/or tight spaces with the Job Link® System Pressure Probes. Pressure sensors are accurate at any elevation so your readings are spot on no matter your location.

• 45° angled fitting easily connects in tight spaces
• Pressure sensors are accurate at any elevation
• Calibrates automatically to barometric pressure

ATB1 K-Type Thermocouple by Fieldpiece

The ATB1, K-type bead thermocouple is used to take temperatures of air, surfaces, or liquids up to 400°F. Using the included Velcro strap allows for easy pipe temperature measurements, though not as accurately as the ATC1 Pipe Clamp Thermocouple. Use the ATB1 for outdoor dry bulb temperatures when finding target superheat. The ATB1 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.

The wrap-tab allows the thermocouple wire to conveniently store on the plug. Just wrap the excess wire around the wrap-tab and feed it through one of the eyes. Keep a few of them set at different lengths for fast, job-specific, switching between thermocouples. No more tangled messes in your tool bag.

RWA2 Wall Charger for SRL2K7 and SRL8 by Fieldpiece

Whether you need a replacement or an extra charger for your Fieldpiece refrigerant leak detector, the RWA2 works with both the SRL2K7 and SRL8. Keep one in the office and one in your service bag because Fieldpiece leak detectors are operational while charging.

DR58 Heated Diode Refrigerant Leak Detector by Fieldpiece

Compact and rugged, the DR58 Heated Diode Refrigerant Leak Detector helps you find leaks fast in the field. Its heated diode sensor detects all HFC, HCFC, CFC, HFO, and blends.

Multiple indicators and sensitivity 20x higher than soap bubbles make it easy to track down even the smallest leaks in various environments. A red LED flashes at the tip so you can keep your eyes on the target. The large bars on the backlit LCD are easy to see in bright sunlight or low light, and the numerical value provides an extra digit of resolution.

Unlike conventional leak detectors, you have full control with both an automatic (AZERO) and manual (MZERO) zero mode.

The large Li-ion rechargable battery provides over 18 hours of continuous operation and is convenient to charge via USB-C. Replaceable tips filter out water and dust while getting into tight spots. All wrapped up in a ruggedized IP54 housing, it's built for the field.

• Sensitivity better than 0.03 oz/yr (1g/a)
• Bright, LCD screen with easy-to-see bar graphs and numeric readings
• 18-hour USB rechargeable lithium-ion battery
• Detects all HFC, CFC, HCFC, HFO and blends
• Flashing lighted tip, multiple alarms, and numerical leak size indicator
• Manual or automatic zeroing
• Great performance on R410A

One-of-a-kind by design.

Since it's a Fieldpiece, the DR58 Heated Diode Refrigerant Leak Detector is full of the features you need. It's also designed to handle the abuse that most leak detectors can't with an impact resistant IP54-certified body that fits easily in your hand.

Clearly see even the smallest leak.

Sniffing leaks at less than 0.03 oz/yr (1g/a), the DR58 detects all HFC, CFC, HCFC, HFO and blended refrigerants with superior sensitivity at detecting R410A refrigerant. On the DR58's new, bright backlit LCD screen you ll see easy-to-read bar graphs, numeric readings and customizable dual alarms. No more guessing about what's leaking. Also, it can both automatically and manually zero to refrigerant gas concentrations giving you total control.

Detects faster. Lasts longer.

The DR58 boasts an 18-hour battery life that'll last longer than you will on the job site. Yes, it's built to perform. Soap bubble solutions can take several minutes to form visible bubbles and messy UV dyes can take several hours to travel through a running system.

Every feature you'll love:

• Ruggedized and IP54-certified body
• Compact to fit in your hand
• Bright, backlit LCD screen shows bar graph and numeric readings
• Heated diode sensor 300 hour life, typical
• Dual audible and visual alarms – turn the beep on or off when you want
• LED lighted tip and loud beep help find leaks in noisy and dark environments
• 18-hour USB rechargeable battery – work all day and all night on one charge
• Numerical Leak Size Indicator with Bar Graph
• Non-conductive, sturdy probe stays where you want it
• Weighs less than a pound
• Full control – Automatic Zero, Manual Zero and Mute functions
• Works on A2L Refrigerants

What's Included

• (1) Heated Diode Refrigerant Leak Detector – DR58
• (5) Replacement Filtered Tips – RFT6
• (1) Blow-Molded Case
• (1) Heated Diode Sensor – RHD1

DR82 Infrared Refrigerant Leak Detector by Fieldpiece

Compact and rugged, the DR82 Infrared Refrigerant Leak Detector helps you find leaks fast in the field. The 10 year infrared (IR) sensor detects all HFC, HCFC, CFC, HFO, and blends.

Multiple indicators and sensitivity 20x higher than soap bubbles make it easy to track down even the smallest leaks in various environments. A red LED flashes at the tip so you can keep your eyes on the target. The large bars on the backlit LCD are easy to see in bright sunlight or low light, and the numerical value provides an extra digit of resolution.

Unlike conventional leak detectors, you have full control with both an automatic (AZERO) and manual (MZERO) zero mode.

The large Li-ion rechargable battery provides over 10 hours of continuous operation and is convenient to charge via USB-C. Replaceable tips filter out water and dust while getting into tight spots. All wrapped up in a ruggedized IP54 housing, it's built for the field.

• State-of-the-art infrared sensor
• Massive backlit LCD screen provides clear, easy-to- see information
• Sensitivity better than 0.03 oz/yr (1g/a)
• Detects all HFC, CFC, HCFC, HFO and blends
• Flashing lighted tip, loud beeper and leak rate indicator
• Doesn't trigger on soap bubbles and oil

The highest possible sensitivity.

If you want to find leaks faster for your customers, try the Fieldpiece DR82 Infrared Refrigerant Leak Detector. Our newest detector can sniff out leaks at <0.03 oz/yr. That's 20 times more sensitive than soap bubbles. This exceeds detection standards so you can quickly find and pinpoint leaks. DR82 triggers on all HFC, CFC, HCFC, HFO and blends.

Goodbye false-positives.

Unlike other detectors you'll find on the market, the DR82 doesn't trigger on oil or moisture. It also senses change in refrigerant levels and can work in contaminated environments. The sensors are fast-acting and last up to 10 years.

Easy to use, see and charge.

The DR82 is designed to easily fit in your hand and is rugged enough to handle the demands you face in the field every day. Its new, bright screen has an easy-to-read bar graphs, numeric readings and customizable dual alarms so you'll always know exactly what you're seeing. The DR82 also holds a charge for up to 10 hours and can be used while charging, so it can work as long as you need.

DR82 Features:

• 10-year sensor life
• Doesn't trigger on soap bubbles and oil
• Compact – designed to fit in your hand
• Multiple alarms
• LED lighted tip and loud beep help find leaks in noisy and dark environments
• Sensitivity better than 0.03 oz/yr (1g/a)
• Ruggedized and IP54-certified
• 10-hour battery charge
• Bright blue, back-lit LCD screen with clear numerical leak size indicator and bar graph
• Non-conductive, sturdy probe that stays where you want it.
• Weighs less than a pound
• Works on A2L Refrigerants

What's Included

• (1) Advanced Infrared Refrigerant Leak Detector – DR82
• (5) Replacement Filtered Tips – RFT6
• (1) Blow-Molded Case

SC680 Job Link System Power Swivel Clamp Meter with 1000VDC by Fieldpiece

Whether you're working on small circuitry in mini-splits or on large commercial units, the new SC480 and SC680 are packed with everything you need to install, service, and troubleshoot any HVACR system.

• Measures Power (kW)
• Use on variable frequency drives (VFDs)
• True RMS & Low Pass Filter for VAC/Hz
• Test Diodes and Resistance up to 50MΩ
• Molex tip leads for small power connectors
• DC Amps, Dual Temp, Swivel Clamp, Lead Storage (SC680)

Direct Integration with Job Link® System App!

Pair all your Job Link tools in the Job Link App to receive and document a complete system snapshot wirelessly. From the new SC480 and SC680 clamp meters and SM380V and SM480V manifolds, to the JL3 Job Link Probes, and SRS3 scale all measurements are live and in real time so you can see exactly how adjustments are affecting the system.

Document all measurements

Clearly communicate the health of the system with your co-workers and customers. Proven to help reduce call backs and increase sales.

• Wireless Bluetooth Beacon
• 115' (35 meters) wireless connection direct to mobile device
• Document electrical measurements
• Calculate power and system efficiency
• Measure accurate blower amperages behind the door
• Wireless monitoring of compressor VAC and AAC

Top-of-the-Line HVACR Meters

Not only do these meters communicate with Job Link, but you can also measure power consumption (kW) to determine system efficiency. Verify 3-phase rotation with just two leads. Take more accurate VAC and AAC readings with True RMS. Filter out noise to get true voltage and frequency with low pass filter.

• Measures Power (kW) for system efficiency
• Has True RMS and Low Pass Filter (LPF) to obtain accurate VFD readings
• Indicates 3-phase rotation with two leads
• Measures start/run capacitors
• Molex tips reach into power connectors
• Magnet for mounting meter during use
• Safety rated CAT IV-600V/CAT III-1000V

SC680

• DC Amps and Diode for mini-split inverters
• Dual temperature for delta T
• Swivel clamp to view readings at any angle
• Test lead storage
• Backlit dial

SC620 Loaded Swivel Clamp Meter by Fieldpiece

The SC620 swivel-head clamp meter is packed with all the electrical measurements HVACR professionals use everyday. It also includes a host of safety features like a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder with detachable leads, and alligator probe tips for easy one-handed testing. As far as ranges go, the SC620 clamp meter has temperature, capacitance, and microamps DC for flame diode tests. It's a rugged workhorse you can count on to get the job done easier, faster, and more safely.

The SC620 is fast reacting, easy-to-use, and rugged, with extended temperature tolerances that allow for testing in freezers and on hot rooftops.Designed specifically for HVACR field service, the SC620 is a dedicated digital multimeter that offers specific features and benefits to help HVACR professionals do more, everyday:

• Volts AC/DC
• Swivel clamp
• Magnetic strap
• Dual display
• Temperature F/C
• Capacitance
• Duty cycle %
• 400 amps AC
• Microamps DC
• Frequency via leads and clamp
• Non-contact voltage
• 50 Mega Ohm with 0.1 resolution
• Continuity
• Diode test
• Hold
• Clamp probe holder
• Low battery indicator
• Lead storage

Includes

• SC620 Meter
• ADLS2 Deluxe Silicone Lead Set with Gold Plated Tips and Removable Sheath
• ATB1 Wrap Tab Type K Thermocouple
• ASA2 Short Alligator Lead Extensions
• Velcro Strap
• 9V Battery
• ANC7 Padded Case

SC480 Job Link System Power Clamp Meter with 1000VDC by Fieldpiece

Whether you're working on small circuitry in mini-splits or on large commercial units, the new SC480 and SC680 are packed with everything you need to install, service, and troubleshoot any HVACR system.

• Measures Power (kW)
• Use on variable frequency drives (VFDs)
• True RMS & Low Pass Filter for VAC/Hz
• Test Diodes and Resistance up to 50MΩ
• Molex tip leads for small power connectors
• DC Amps, Dual Temp, Swivel Clamp, Lead Storage (SC680)

Direct Integration with Job Link® System App!

Pair all your Job Link tools in the Job Link App to receive and document a complete system snapshot wirelessly. From the new SC480 and SC680 clamp meters and SM380V and SM480V manifolds, to the JL3 Job Link Probes, and SRS3 scale all measurements are live and in real time so you can see exactly how adjustments are affecting the system.

Document all measurements

Clearly communicate the health of the system with your co-workers and customers. Proven to help reduce call backs and increase sales.

• Wireless Bluetooth Beacon
• 115' (35 meters) wireless connection direct to mobile device
• Document electrical measurements
• Calculate power and system efficiency
• Measure accurate blower amperages behind the door
• Wireless monitoring of compressor VAC and AAC

Top-of-the-Line HVACR Meters

Not only do these meters communicate with Job Link, but you can also measure power consumption (kW) to determine system efficiency. Verify 3-phase rotation with just two leads. Take more accurate VAC and AAC readings with True RMS. Filter out noise to get true voltage and frequency with low pass filter.

• Measures Power (kW) for system efficiency
• Has True RMS and Low Pass Filter (LPF) to obtain accurate VFD readings
• Indicates 3-phase rotation with two leads
• Measures start/run capacitors
• Molex tips reach into power connectors
• Magnet for mounting meter during use
• Safety rated CAT IV-600V/CAT III-1000V

SC680

• DC Amps and Diode for mini-split inverters
• Dual temperature for delta T
• Swivel clamp to view readings at any angle
• Test lead storage
• Backlit dial

SC640 Loaded Clamp Meter by Fieldpiece

The SC640 clamp meter is packed with more features and measurements than any clamp meter in the HVACR industry. The loaded SC640 features lead storage, a swivel head, test lead holder, heavy duty magnetic strap, jaw flashlight, and a backlight on the dial so you can easily choose the right measurement in poorly lit spaces. Plus the SC640 hosts all the electrical measurements HVACR pros use everyday, along with features like True RMS, Inrush current, capacitance, temperature, duty cycle, and microamps DC.

The top-of-the-line SC640 clamp meter helps HVACR professionals do more everyday:

• Volts AC/DC
• True RMS
• Inrush current
• Swivel clamp
• Magnetic strap
• Probe storage
• Dual display
• Temperature F/C
• Capacitance
• Duty cycle %
• 400 amps AC
• Microamps DC
• Frequency via leads and clamp
• Non-contact voltage
• 50 Mega Ohm with 0.1 resolution
• Continuity
• Diode test
• Hold
• Clamp probe holder
• Dial backlight
• Clamp jaw light
• LCD backlight
• Low battery indicator

Includes

• SC640 Meter
• ADLS2 Deluxe Silicone Lead Set with Gold Plated Tips and Removable Sheath
• ATB1 Wrap Tab Type K Thermocouple
• ASA2 Short Alligator Lead Extensions
• Velcro Strap
• 9V Battery
• ANC7 Padded Case

STA2 In Duct Hot-wire Anemometer by Fieldpiece

The STA2 is a Hot-wire Anemometer built for the HVACR professionals' air balancing needs. The compact probe tip makes measuring air velocity directly in the duct a breeze. It's great for traversing a duct and automatically calculating CFM without the hassle and expense of a bulky hood. The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct, and ensures that the probe is properly aligned.

This in duct hot-wire anemometer quickly calculates CFM from air velocity and free area. And with the intuitive interface, the STA2 makes it easy to capture the correct data.

• Measures air velocity and temperature
• Calculates CFM
• Slim 38" telescoping probe for in duct traversing
• Fast response time
• Dual display for combo of real-time CFM, air velocity, or temp
• Depth and direction indicators
• Minimizes turbulence effect with time/test point averages
• Hands-free testing with stabilizing cone and magnetic hanger

Includes

• Hot-wire Anemometer - STA2
• Stabilizing Cone
• Blow-molded Case with Padding

MDSH1 Magnetic Parts Dish by Fieldpiece

This hanging magnet for parts and screws is a great addition to any parts bench and an even better performer in the field. Hang it on the side of a unit or any magnet-compatible metal surface. Right side up, upside down, vertically, it doesn't matter. The MDSH1 holds screws, tools and more firmly in place and out of the way while you work. It combines a strong magnet with a chrome-finish dish featuring our logotype.

HS33 Manual Ranging Digital Multimeter by Fieldpiece

The HS33 Multimeter is a great entry level modular multimeter. Like every Fieldpiece meter, it's packed with the features and functions HVACR technicians need to get the job done. The ergonomic shape fits firmly and naturally in your hand while testing. The magnetic hanger, detachable test leads and alligator clip probe tips, allow you to perform tests hands-free.

Because this multimeter has all the basics and more for a great price, many schools prefer it for their HVACR students. The rugged rubberized bumpers help this meter stand up to tough conditions in the field.

Ranges

• VAC
• VDC
• AAC
• Temperature
• Capacitance (MFD)

Features

• Non-contact voltage alert
• Quick temperature compensation
• 400AAC
• High voltage and continuity indicators
• MIN / MAX and Data HOLD
• Silicone leads with detachable probe tips
• Manual ranging
• Partners with all accessory heads to do more with one meter
• Convenient lead storage
• Safe one-handed testing

All Fieldpiece accessory heads slide directly on top of the HS33, so you can test a wider variety of parameters than what's in a single meter. The modular expandability of the HS33 makes it so you don't have to buy additional expensive meters to preform additional measurements like air flow, amps, static pressure, vacuum, and many more. There are 15 additional accessory heads to choose from.

Includes

• Expandable Manual Ranging Stick Multimeter for HVAC/R - HS33
• 400A Amp Clamp Accessory - ACH4
• Deluxe Silicone Test Leads - ADLS2
• Short Alligator Lead Extensions - ASA2
• Deluxe Meter Case - ANC1
• 9-Volt Battery (installed)
• Operator's Manual

SC660 Swivel Meter-Wireless by Fieldpiece

The new SC460 and SC660 wireless clamp meters team up with the Job Link system to provide even more in-depth testing, diagnostics and reports.

Clamp readings are wirelessly sent to the Job Link System via the long range JL2 Transmitter. Email reports and store them in the cloud for future reference.

Plus, now you can document both power and system efficiency (SEER and EER) in Job Link with the wireless clamps and wireless psychrometer.

• 3-Phase Rotation Testing with Two Leads
• Record Motor Start up with Inrush Current
• Non-contact Voltage and One Handed Testing
• Backlit Display
• Strong Magnetic Hanger
• Swivel-head, Lead Storage, and Jaw Light (SC660)
• DC Amps (SC660)
• Dual Temp for Delta-T Calculations (SC660)

AAV3 Air Velocity and Temperature Accessory Head by Fieldpiece

The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units: Ft/min, M/s, MPH, KM/hr, °F (degrees Fahrenheit) or °C (degrees Celsius). Multiply your air velocity by the register's free area to estimate CFM or diagnose duct blockages and quickly check the airflow balance in a conditioned space. Use with our DL3 Data Logger to track airflow or temperature over time. Features average and real time testing modes.

The AAV3 Anemometer Air Velocity and Temperature Accessory offers several features and benefits to field technicians:

• Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges and our detachable leads.
• Measures air velocity and measures air temperature.
• Measure in hard to reach areas using detachable test leads.
• Display readings smoothly in average mode or switch to real-time measurement.
• Low battery indicator.
• Auto-power off after 10 minutes (may be disabled).
• Estimate CFM
• Large vane covers most of register's free area

Includes

• Air Velocity and Temperature Accessory - AAV3
• 9V Alkaline Battery (installed)
• Operator's Manual