$100 - $150, Digi-Sense

93870-00 Type-J, 2-Wire Feedthrough, 1 / 2" NPT (M) Fitting, 48" PTFE Wire by Digi-Sense

Use these two-wire feedthroughs to make connections inside vessels or chambers. Use with probes with miniconnectors. Feedthroughs withstand vacuum conditions or pressures to 100 psi. Stainless steel and epoxy construction. Temperature range: -40 to 250°> F (-40 to 121°> C). Feedthroughs have a 1/2" NPT(M) fitting. Include 48" L, PTFE insulated, 24-gauge (0.0201" wire dia) lead wires.

93870-02 Type-K, 2-Wire Feedthrough, 1 / 2" NPT (M) Fitting, 48" PTFE Wire by Digi-Sense

Use these two-wire feedthroughs to make connections inside vessels or chambers. Use with probes with miniconnectors. Feedthroughs withstand vacuum conditions or pressures to 100 psi. Stainless steel and epoxy construction. Temperature range: -40 to 250°> F (-40 to 121°> C). Feedthroughs have a 1/2" NPT(M) fitting. Include 48" L, PTFE insulated, 24-gauge (0.0201" wire dia) lead wires.

93870-04 Type-T, 2-Wire Feedthrough, 1 / 2" NPT (M) Fitting, 48" PTFE Wire by Digi-Sense

Use these two-wire feedthroughs to make connections inside vessels or chambers. Use with probes with miniconnectors. Feedthroughs withstand vacuum conditions or pressures to 100 psi. Stainless steel and epoxy construction. Temperature range: -40 to 250°> F (-40 to 121°> C). Feedthroughs have a 1/2" NPT(M) fitting. Include 48" L, PTFE insulated, 24-gauge (0.0201" wire dia) lead wires.

94400-62 Traceable® Walkaway Count-Up Controller with Calibration; 0.01 sec to 99 hrs by Digi-Sense

Controllers perform reproducible stirring, heating, or pumping times. Used for timed shutdown or repeated on/off timing during any test. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal NiCd battery maintains programs in the event of a power outage. Three-pronged grounded receptacle relay for apparatus to 115 VAC, 115 amps, 1800 watts, and 1/3 horsepower.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94400-62 turn-off controller counts up and turns any piece of equipment off at the end of a set time period. Programmable in three interval settings: .01 second to 99.99 seconds, 1 minute to 9999 minutes, and 1 hour to 9999 hours.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Program setting in less than 5 seconds

Includes

NIST-traceable calibration certificate with data.

94400-64 Traceable® Walkaway Count-Up Controller with Calibration; 1 sec to 99 hrs by Digi-Sense

Controllers perform reproducible stirring, heating, or pumping times. Used for timed shutdown or repeated on/off timing during any test. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal NiCd battery maintains programs in the event of a power outage. Three-pronged grounded receptacle relay for apparatus to 115 VAC, 115 amps, 1800 watts, and 1/3 horsepower.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94400-64 repeat turn-on/turn-off controller counts up and turns any piece of equipment on for a programmed time and off for a different programmed time. Repeat features automatically continues cycling on and off programmed times ntil manually stopped. Programmable for separate on and off timing periods in three interval setting: 1 second to 99 seconds; 1 minute to 99 minutes, and 1 hour to 99 hours.

• Program setting in less than 5 seconds
• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

94460-78 Traceable® Wireless Thermometer Set with Calibration; 1 Remote Module w/Bullet Probe by Digi-Sense

Wireless signal from weatherproof remote sensor broadcasts temperature measurements up to 100 feet in an open area. Each set consists of a main unit/receiver and a remote module. A total of three modules may be used with the main receiver. The receiver displays data from all three transmitting modules along with temperature trends. Display MIN/MAX values at the touch of a button. Alarm sounds when temperature exceeds or falls below limits on any channel. Alarm sounds for one minute or until muted or disabled. °F or °C selectable. Supplied with Velcro® and bracket for wall mounting or has a flip-out stand for tabletop use.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Bullet probe (3/4"L x 0.187" dia) is ideal for measuring air and liquid temperatures.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Transmitting modules have a remote probe to measure air, liquids, or solids
• Monitors temperature continuously data is transmitted every 30 seconds
• Bullet probe sensor and cable may be completely immersed

Includes

NIST-traceable calibration certificate with data.

Main unit/receiver, remote module, Bullet probe (3/4"L x 0.187" dia) with 10-ft cable, flip-open stand, wall mount, batteries, and NIST-traceable certificate with data.

94460-92 Traceable® High-Accuracy Fridge/Freezer Thermometer with Calibration; 2 Bottle Probes by Digi-Sense

Easily and accurately monitor temperature in most scientific, industrial, or general-purpose applications. Built-in alarms alert continuously until reset. Unit displays the exact time and date when thermometer alarms are triggered. Program the alarm in 0.1° increments. Thermometers have one-button field calibration and date/time stamp. Meters that accept two probes are ideal for monitoring two unique areas that are near each other. Probe comes with a microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Thermometer comes with bottle probes filled with nontoxic glycol, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Resolution of 0.01° and accuracy of ±0.6°F (±0.3°C)
• Visual and audible alarms signal continuously until reset
• Bottle probes insulate sensors from rapid temperature changes

Includes

Bottle probes with 10-ft (3-m) cable, magnetic strips, Velcro® strips, bench stand, batteries, and NIST-traceable calibration certificate with data.

94460-98 Traceable® High-Accuracy Fridge/Freezer Thermometer with Calibration; 1 SS Probe by Digi-Sense

Easily and accurately monitor temperature in most scientific, industrial, or general-purpose applications. Built-in alarms alert continuously until reset. Unit displays the exact time and date when thermometer alarms are triggered. Program the alarm in 0.1° increments. Thermometers have one-button field calibration and date/time stamp. Meters that accept two probes are ideal for monitoring two unique areas that are near each other. Probe comes with a microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Stainless steel probe is ideal for measuring temperatures of air, liquids, and semisolids; sensor stem measures 6.25"L x 1/8" dia (15.9 x 0.3 cm).

• Get accurate, reliable measurements with included NIST-traceable calibration
• Resolution of 0.01° and accuracy of ±0.6°F (±0.3°C)
• Visual and audible alarms signal continuously until reset
• Durable stainless steel probe withstand both low and high temperatures

Includes

Stainless steel probe with 5-ft (1.5-m) cable, magnetic strips, Velcro® strips, bench stand, batteries, and NIST-traceable calibration certificate with data.

94460-99 Traceable® High-Accuracy Fridge/Freezer Thermometer with Calibration; 2 SS Probes by Digi-Sense

Easily and accurately monitor temperature in most scientific, industrial, or general-purpose applications. Built-in alarms alert continuously until reset. Unit displays the exact time and date when thermometer alarms are triggered. Program the alarm in 0.1° increments. Thermometers have one-button field calibration and date/time stamp. Meters that accept two probes are ideal for monitoring two unique areas that are near each other. Probe comes with a microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Stainless steel probes are ideal for measuring temperatures of air, liquids, and semisolids; sensor stem measures 6.25"L x 1/8" dia (15.9 x 0.3 cm).

• Get accurate, reliable measurements with included NIST-traceable calibration
• Resolution of 0.01° and accuracy of ±0.6°F (±0.3°C)
• Visual and audible alarms signal continuously until reset
• Durable stainless steel probes withstand both low and high temperatures

Includes

Stainless steel probes with 5-ft (1.5-m) cable, magnetic strips, Velcro® strips, bench stand, batteries, and NIST-traceable calibration certificate with data.

97152-18 Traceable Digital Caliper with Calibration, Stainless Steel; 0-6" by Digi-Sense

These stainless steel digital calipers measure inside diameter, outside diameter, and depth. Easily switch from inches to millimeters with the touch of a button. Fine-adjustment thumb roller improves reading speed and position-holding lock screw sets length.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Durable stainless steel construction
• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Designed with 0 to 6" range with 0.0005" resolution

Includes

NIST-traceable calibration certificate with data and battery.

98766-88 Traceable Relative Humidity Meter with Dew Point and Calibration by Digi-Sense

This pocket-sized thermohygrometer measures full-range relative humidity, temperature from -4 to 122°F (-20 to 50°C), and calculates dew point. Compact design features an electronic capacitance polymer film sensor - not affected by condensation.

Quickly recall minimum and maximum RH and temperature values, and freeze data readings with the press of a button. The dual-line display simultaneously shows humidity and either current or dew point temperature. Unit turns off automatically after 20 minutes of non-use to conserve battery life.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Full-range response time less than 1 minute
• Sensor is not affected by condensation - measure up to 100% RH

Includes

Two AAA batteries, probe cover, and NIST-traceable calibration certificate with data.

98767-07 Traceable® Tachometer with Calibration; Touch by Digi-Sense

Obtain speed measurements from centrifuges, pumps, rollers, shafts, gears, motors, and moving surfaces with this contact tachometers. Three tips are included for added versatility - simply touch the tip to the surface to be measured.

Compact tachometer fits easily in your hand, pocket, and toolbox, and features a HOLD button to freeze the displayed reading.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Obtain both RPM and surface speeds - in feet per minute, meter per minute, or yard per minute

Includes

One 9 V battery, convex cone tip, concave funnel tip, speed wheel tip, and NIST-traceable calibration certificate with data.

98767-08 Traceable Tachometer with Calibration; Laser by Digi-Sense

This handheld, point-and-shoot tachometer targets a rotating object and provides instant results - simply place a piece of reflective tape on the object to be measured. Speed readings are provided in 2 seconds over a range of 10 to 99,999 RPM. Tachometer powers off automatically after 20 min of non-use.

Compact tachometer fits easily in your hand, pocket, or toolbox. Ideal for measuring speed on centrifuges, pumps, rollers, shafts, gears, motors, and moving surfaces.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Obtain speed readings in 2 seconds; HOLD button freezes results
• Rugged ABS-plastic housing

Includes

reflective tape (2 ft/0.6 m), one 9 V battery, and NIST-traceable calibration certificate with data.

98767-30 Traceable High-Accuracy Fridge/Freezer Thermometer with Calibration; 1 Bottle Probe by Digi-Sense

Easily and accurately monitor temperature in most scientific, industrial, or general-purpose applications. Built-in alarms alert continuously until reset. Unit displays the exact time and date when thermometer alarms are triggered. Program the alarm in 0.1° increments. Meters that accept two probes are ideal for monitoring two unique areas that are near each other. Probe comes with a microcable that permits a door to close on it.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer comes with a bottle probe filled with nontoxic glycol, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Resolution of 0.01° and accuracy of ±0.6°F (±0.3°C)|Visual and audible alarms signal continuously until reset
• Bottle probe insulate sensor from rapid temperature changes

Includes

Bottle probe with 10-ft (3-m) cable, magnetic strips, hook-and-loop strips, bench stand, batteries, and NIST-traceable calibration certificate with data.

98767-45 Traceable IR Gun Thermometer with Laser and Calibration by Digi-Sense

Simple one-handed point-and-shoot operation makes it easy to use anywhere you need to take temperature measurements. Noninvasive measurements are ideal for food preparation, life sciences, and pharmaceutical applications.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Laser-sighting pinpoints your measurement area for accurate measurements
• Backlighting permits viewing in low light conditions
• °F/°C selectable
• Features HOLD, MAX, and low-battery indicator

Includes

batteries and NIST-traceable calibration certificate with data.

98767-50 Traceable IR Gun Thermometer with Laser, Type K Input, and Calibration by Digi-Sense

Simple one-handed point-and-shoot operation makes it easy to use anywhere you need to take temperature measurements. Noninvasive measurements are ideal for food preparation, life sciences, and pharmaceutical applications.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Included type K beaded probe measures temperatures from -40 to 482°F (-40 to 250°C) continuous or 572°F (300°C) short-term use.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Laser-sighting pinpoints your measurement area for accurate measurements
• Backlighting permits viewing in low light conditions
• °F/°C selectable
• Accepts type K thermocouple probe
• Meter temperature range is -83 to 2552°F (-64 to 1400°C)
• Adjustable emissivity from 0.10 to 1.00
• Features average reading, difference between two readings, memory recall, HOLD, HI/LOW audible alarms, MIN/MAX, and low-battery indicator

Includes

0.06" diameter type K beaded probe, batteries, and NIST-traceable calibration certificate with data.

98767-51 Traceable High-Accuracy Fridge/Freezer Thermometer with Calibration; 1 Vaccine Bottle Probe by Digi-Sense

Easily and accurately monitor temperature in most scientific, industrial, or general-purpose applications. Built-in alarms alert continuously until reset. Unit displays the exact time and date when thermometer alarms are triggered. Program the alarm in 0.1° increments. Meters that accept two probes are ideal for monitoring two unique areas that are near each other. Probe comes with a microcable that permits a door to close on it.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer comes with a vaccine bottle probe filled with nontoxic glycol, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Resolution of 0.01° and accuracy of ±0.6°F (±0.3°C)|Visual and audible alarms signal continuously until reset
• Bottle probe insulate sensor from rapid temperature changes Vaccine bottle is designed to fit vaccine trays

Includes

Vaccine bottle probe with 10-ft (3-m) cable, magnetic strips, hook-and-loop strips, bench stand, batteries, and NIST-traceable calibration certificate with data.

98767-52 Traceable High-Accuracy Fridge/Freezer Thermometer with Calibration; 2 Vaccine Bottle Probes by Digi-Sense

Easily and accurately monitor temperature in most scientific, industrial, or general-purpose applications. Built-in alarms alert continuously until reset. Unit displays the exact time and date when thermometer alarms are triggered. Program the alarm in 0.1° increments. Meters that accept two probes are ideal for monitoring two unique areas that are near each other. Probe comes with a microcable that permits a door to close on it.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer comes with vaccine bottle probes filled with nontoxic glycol, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Resolution of 0.01° and accuracy of ±0.6°F (±0.3°C)|Visual and audible alarms signal continuously until reset
• Bottle probes insulate sensors from rapid temperature changes Vaccine bottles are designed to fit vaccine trays

Includes

Vaccine bottle probes with 10-ft (3-m) cable, magnetic strips, hook-and-loop strips, bench stand, batteries, and NIST-traceable calibration certificate with data.

98767-67 Traceable Excursion-Trac™ Datalogging Thermometer with Calibration; 1 Plastic Bottle Probe by Digi-Sense

Easily monitor temperatures overnight or for any time period - minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive - no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer comes with a plastic bottle probe filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display - shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

plastic bottle probe with 10-ft cable, flip-open stand, hook-and-loop strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

98768-51 Traceable Rapid-Response Folding Stem Thermometer with Calibration; 1 2.8" Stainless Steel Probe by Digi-Sense

These digital thermometers are ideal for food applications. The silver-impregnated coating is 99% effective, and 100% safe! The stainless-steel probe is resistant to both corrosion and chemicals. Fold-up penetration sensor protects both the user and the probe from damage.

Obtain a measurement within 0.9°C in seconds! The wide range covers 99% of routine temperature checks: -40.0 to 250.0°C, with a resolution of 0.1° and ±0.5°C accuracy from -20 to 250°C, ±1.0°C otherwise.

The IP65 rating is ideal for wet areas. Protected against splashes and minor jets of water (like those from a tap), and ideal for kitchen and lab use. A magnetic back lets you stick the thermometer in convenient locations; its compact, foldable size lets you put it in your pocket.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Rapid-response means readings within 0.9°C in 2 to 3 seconds|Foldable stem can be used at any angle|Use in messy and wet areas - antimicrobial coating and IP65 rated
• Thermometer is preset to Celsius

Includes

NIST-traceable calibration certificate with data and battery.

98768-52 Traceable Rapid-Response Folding Stem Thermometer with Calibration; 1 4.5" Stainless Steel Probe by Digi-Sense

These digital thermometers are ideal for food applications. The silver-impregnated coating is 99% effective, and 100% safe! The stainless-steel probe is resistant to both corrosion and chemicals. Fold-up penetration sensor protects both the user and the probe from damage.

Obtain a measurement within 0.9°C in seconds! The wide range covers 99% of routine temperature checks: -40.0 to 250.0°C, with a resolution of 0.1° and ±0.5°C accuracy from -20 to 250°C, ±1.0°C otherwise.

The IP65 rating is ideal for wet areas. Protected against splashes and minor jets of water (like those from a tap), and ideal for kitchen and lab use. A magnetic back lets you stick the thermometer in convenient locations; its compact, foldable size lets you put it in your pocket.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Rapid-response means readings within 0.9°C in 2 to 3 seconds|Foldable stem can be used at any angle|Use in messy and wet areas - antimicrobial coating and IP65 rated
• Thermometer is preset to Celsius

Includes

NIST-traceable calibration certificate with data and battery.

99760-50 Traceable® Three-Scale Dial Barometer with Calibration; mbar/"Hg/mm Hg by Digi-Sense

Three-Scale dial barometer measures atmospheric pressure in millibar (mbar), inches Hg, and mm Hg. The barometer is housed in corrosion-proof nickel-chrome case. Set the adjustable pointer to measure changes in pressure. Barometers are calibrated to NIST-traceable standards and include certificate. Includes altitude adjustment screw, notched deskstand, and wall mount. Measures 1.3"D x 4" dia.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes:

NIST-traceable calibration certificate with data.

WD-20250-01 Thermocouple Thermometer, Type K/J with NIST Traceable Calibration by Digi-Sense

Handheld thermocouple thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlight LCD for easy viewing in dimly lit conditions
• Minimum, maximum, and average readings, plus data Hold function
• Display of temp differential (except model 20250-01)
• Relative time clock on Min/Max/Avg provides a time reference for major events
• Electronic offset function allows compensation of probe errors to maximize overall accuracy
• User-selectable readout in °C, °F, or Kelvin (K) with 0.1 resolution
• Simple, intuitive setup and operation
• Auto power-off mode extends battery life
• Ergonomic design fits comfortably in your hand
• Data logging models available
• Accept a wide variety of thermocouple probes

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

WD-20250-05 12:1 IR Thermometer with Temperature Alarm and NIST Traceable Calibration by Digi-Sense

Ergonomic pistol-grip infrared (IR) thermometers provide the precision you need for quick and easy temperature measurements. Noncontact meters safely measure the surface temperature of objects without physically touching the object. Simply aim, pull the trigger, and read the display—reliable measurements couldn't be easier!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Laser sighting helps target the measuring area
• Large backlight LCD with backlight for easy viewing
• Adjustable emissivity (except model 20250-04)
• Min/Max readings and data Hold function
• User-selectable temperature readout in °C or °F
• Automatic selection range and display resolution
• Trigger lock for continuous scanning of temperatures
• Auto power-off mode extends battery life

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance