Regulators, Calibration Gas

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6600

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8600

Preset Flow Regulator

The 400 Series single-stage, piston-style regulators are designed to deliver a preset flow of non-corrosive gases in the 17 liter or 34 liter non-refillable cylinders with CGA 600 inlets. Each regulator comes with a cylinder pressure gauge.

Part Number: 417

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6170

Pressure Reducing Regulator

The 700 Series regulators are for use with Norlab s 22 liter and 221 liter cylinders. Their miniature size and lightweight construction make them ideal for use with these nonrefillable cylinders.

Part Number: 701

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 517ss

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8580

Part Number: 4903

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 517tr

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 513

Preset Flow Regulator

The 400 Series single-stage, piston-style regulators are designed to deliver a preset flow of non-corrosive gases in the 17 liter or 34 liter non-refillable cylinders with CGA 600 inlets. Each regulator comes with a cylinder pressure gauge.

Part Number: 418

Preset Flow Regulator

The 400 Series single-stage, piston-style regulators are designed to deliver a preset flow of non-corrosive gases in the 17 liter or 34 liter non-refillable cylinders with CGA 600 inlets. Each regulator comes with a cylinder pressure gauge.

Part Number: 411

Part Number: 4903-600

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 512

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 514

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 516

Part Number: 518ss

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6330

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6590

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6660

Part Number: 6C10N

Part Number: 6C10R

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8180

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8350