$400 - $500, BW Technologies Monitors

BW Technologies Replacement Sensor PCB for GasAlertMicro 5

Part Number: M5SPCB3

BW Technologies Quint Gas CH4 (2.5%), O2 (18.0%), H2S (25ppm), CO (100ppm), CO2 (0.5%)

Part Number: CGQT341

BW Technologies Replacement PCB Ammonia ext. range (NH3 Ext) - Wireless

Part Number: BWS1-A2-PCB1

BW Technologies Sampling Hose (75 ft. / 22.8 m, 1/8 in. I.D., 1/4 in. O.D.) Kit, Teflon lined for Reactive Gases, with Connectors and 3 Particulate Filters

Part Number: HOSE275

BWS1-XL-B BW Solo Single-Gas Detector, (O2) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-XL-B

BWC2R-S BW Clip RT 2 Year Single Gas Detector, Sulfur Dioxide (SO2), (Low 5 ppm / High 10 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-S

GAXT-M-DL GasAlert Extreme Detector CO (Extended Range) Yellow by BW Technologies

Designed with durability and comfort in mind, the GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a two year fi eld-replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW's MicroDock II automatic test and calibration system. A wide range of user options, multilanguage display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.

• Direct, real-time readings on large LCD
• Operates through consecutive shifts - exceptional battery run-time
• Secure and accurate history with datalogging

Standard features of BW products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlert Extreme features:

• Equipped with internal vibrating alarm for high noise areas
• Secure and accurate history with datalogging
• Multi-language support in English, French, German, Spanish and Portuguese
• Tamper-proof settings with passcode protection

Part Number: GAXTMDL

BW Technologies Cradle Charger and Rechargeable Battery Pack, Yellow

Part Number: M5C01BAT08

BWS-H2-Y BW Solo Single-Gas Detector, (H2S ext range) Standard - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-H2-Y

BWS1-H2-Y BW Solo Single-Gas Detector, (H2S ext range) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-H2-Y

BWC2R-S24 BW Clip RT 2 Year Single Gas Detector, Sulfur Dioxide (SO2), (Low 2 ppm / High 4 ppm) by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC2R-S24

BW Technologies Replacement PCB Carbon Dioxide (CO2) - Standard

Part Number: BWS-BL-PCB1

BW Technologies Replacement PCB Ethylene Oxide (ETO) - Standard

Part Number: BWS-E-PCB1

BWS-H2-B BW Solo Single-Gas Detector, (H2S ext range) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-H2-B

Introducing the Honeywell BW™ Solo, the next generation in compact single-gas detectors.

 

Designed to be easy to use, simple to service, and to provide the sensor options you need. Replacing the GasAlert Extreme and the ToxiPro®, the Honeywell BW™ Solo offers all of their advantages plus it also: Assists with increased compliance Allows workers to stay connected Lowers the ownership costs Boosts worker safety and protection

Convenient Size

Small, lightweight, and compact, the Honeywell BW™ Solo is easy to use in any work environment, making it a favorite for workers.

Effective Single-Gas Detector

With the combination of the low cost and the long life of the Honeywell BW™ Solo, it is a very effective and reliable gas detector. Need to replace a sensor filter? Just open the door on the front. The same no-tools needed method can be used to change the sensor or the battery.

Single Gas Detection Options

The versatility and ease of sensor switch out on the Honeywell BW™ Solo makes it the ideal detector across any industry. It can be used in the manufacturing and petrochemical industries, as well as in power plants and steel mills to detect the following:

• Ammonia (NH₃)
• Hydrogen sulfide (H₂S)
• Hydrogen (H₂)
• Hydrogen cyanide (HCN)
• Carbon monoxide (CO)
• Chlorine (Cl₂)
• Chlorine dioxide (ClO₂)
• Oxygen (O₂)
• Sulfur dioxide (SO₂)
• Nitrogen oxide (NO)
• Nitrogen dioxide (NO₂)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)

 

Increase worker safety with the 1-Series sensor for lower operating costs, higher reading accuracy, and faster response.

When fast response, long life, and the ability to provide dependable results in critical, look no further than the 1-Series sensor for common gases.

Oxygen, Hydrogen Sulfide, and Carbon Monoxide

Currently, the 1-Series sensor is available for use with CO, H₂S, and O₂. With the unique square design that allows for rapid gas diffusion, it offers fast response times with a streamlined, low-profile sensor. At just a third of the height of other sensors, it is much easier to work with.

Sensor Life and Warranty

Based on typical use and gas exposure, the 1-Series sensor can last up to five years, lowering the cost of ownership while also limited downtime. It also comes with a three-year warranty, protecting your investment.

Developed by Honeywell

City Technology, a company with over 40 years in the sensor industry, is a Honeywell company. By utilizing this experienced in-house company, we are able to offer the next-generation in reliability and quality. City Technology is the company responsible for the 40XV and 40xLL oxygen sensor used with our Honeywell BW detector.

Stop Nuisance Alarms

Designed to provide accurate readings in temperatures from -40°C to 60°C, as well as in environments where humidity and transient pressure are a concern, the Honeywell BW™ Solo is accurate and dependable.

Designed to Use in the Field

Practically designed, workers can easily change out the sensor in the field without the need for any special equipment or exposing the printed circuit board to the environment. It is a simple step of removing the old sensor and replacing it with the new.

Automate, centralize,and streamline with fleet management options.

The Honeywell BW™ Solo, Honeywell SafetySuite Device Configurator software, and the IntelliDox can be used in different ways to boost productivity, compliance, and safety.

Using the docking station for testing, configuration and recordkeeping – fully automated

To use, simply place the Honeywell BW™ Solo into the docking station. The system automatically transfers data and completes any pre-selected actions. These actions include bump reminders and bump tests, modifying set points, updating firmware, or other types of options. The software used for fleet management also automatically sends all peak readings and alarms by USB or Ethernet to your computer.

The IntelliDox docks can also be grouped up to five docks. Each has its own pump, keypad, and LCD screen, but they can be configured to operate in sync or as standalone controls, sharing power, and calibration gas.

The Device Configurator

Device Configurator software is Windows-based and allows the user to see and to transfer detector information and data, manage alarm set points, set up firmware updates, and improve compliance, safety, and productivity.

Expanded access through the Cloud

Opting to use the subscription service of the cloud-based Honeywell SafetySuite Device Manager allows for:

• Complete visibility through a single dashboard for all alarms and compliance of detectors throughout the entire system, including in multiple sites and locations.
• Reporting options customized to your needs
• Notification by text or email of alarms in real-time
• Additional compliance benefits and features
• Single location storage for all data needed in audits, reporting or investigations

 

The ease of Smartphone control and detector management. Through apps in the Honeywell Connected Worker portfolio, the Honeywell BW™ Solo can be controlled through wireless technology.

On the Go Control

Downloading and pairing the Honeywell BW™ Solo with any smartphone allows for full control through the Device Configurator app. This app allows the user to setup, configure, and verify test data from distances of up to six meters away using Bluetooth Low Energy (BLE) technology.

With the app, it is easy to check data, including calibration and bump data, as well as see who performed the calibration, what gas was used, and the readings. In addition, the app can create a certificate and mail it to the required stakeholders, just verify it is available during the launch.

Eliminate Docking Requirements

Using the wireless technology offered with the Honeywell BW™ Solo eliminates the needs for the added equipment and costs of docking stations. The app transmits the data directly to the desktop software, all using BLE.

Enhance Monitoring Ability

The Safety Communicator app by Honeywell also allows data to be shared with monitoring software. This is also a technology that does not require docking, providing real-time information to be accessed by any remote device with an internet connection. Safety managers can easily keep track of workers and safety issues.

Making Safety and Compliance a Reality

 

Control at the Push of a Button

The Honeywell BW™ Solo can be controlled by the Honeywell SafetySuite Device Configurator software, or it can be manually controlled with a simply one-button operation. This makes it easy to use in any workplace, even when wearing gloves, which increases both compliance and safety.

Information at a Glance

The use of Honeywell IntelliFlash™ allows for quick visual confirmation the detector is either in compliance or not in compliance. Activating the IntelliFlash™ provides a green flashing light when the system is in compliance, and a red blinking light if it is not.

Out of compliance can be caused by battery issues, a gas event, or if the detector needs bump testing or calibration.

Loud Auditory Alarms and Visual Signals

If there is an alarm on the Honeywell BW™ Solo, it is loud and visual. With both vibration and auditory alarms, as well as red lights around the detector, even noisy environments become safer.

Making Operation Easy

 

Know the position of detectors and workers

Assigning and pairing detectors with locations or workers allows for immediate understanding of where the detector is located.

Peak Readings over 24 Hours

Offer a rolling 24-hour peak reading measurement; it is possible to find trouble issues before they become problematic. The peak reading is often well below the alarm set point, but it is critical to detect problems early.

Language Capabilities

For use in all areas of the world, the Honeywell BW™ Solo can be configured to provide readings in all major languages.

Part Number: BWS-HL-B

A New Generation of Portable Gas Detection

 

A full selection of sensor options in an easy to service and operate detector. As a replacement for the ToxiPro®and the GasAlert Extreme, the Honeywell BW™ Solo is the next-generation in detectors for safety, compliance, and productivity. Adding this solution to your fleet will provide: Longer use cycles for lower cost Allow workers to connect Increase safety in any environment Increase compliance with an easy to use detector

 

Durable and Compact

Small and streamlined, the Honeywell BW™ Solo is easy to use, helping to ensure compliance in any workplace.

Low Cost, Long Life, Easy Service

Thanks to a practical design, the Honeywell BW™ Solo is easy to work on in the field. Removing a door on the front is all that is needed to change out sensor filters, replace the battery, or change the sensor – without the need for any tools.

Range of Sensor Options

No matter where you may be working, the Honeywell BW™ Solo offers the sensor you need to measure both typical or less common types of hazards. Use this sensor for the detection of:

• Hydrogen sulfide (H₂S)
• Sulfur dioxide (SO₂)
• Hydrogen (H₂)
• Ammonia (NH₃)
• Nitrogen dioxide (NO₂)
• Hydrogen cyanide (HCN)
• Ozone (O₃)
• Ethylene oxide (ETO)
• Phosphine (PH₃)
• Nitrogen oxide (NO)
• Chlorine dioxide (ClO₂)

 

It also provides detection for common gases such as Carbon monoxide (CO), Oxygen (O₂), Hydrogen (H₂) and Chlorine (Cl₂).

Getting To Know The 1-Series Sensor

Are you interested in increasing accuracy and lowering the cost of detection while also increasing worker safety? If you are, the 1-Series sensor offers reliability, long duty and life cycle, and a fast response for readings in any type of environment.

Detecting CO, O₂, and H₂S

The square design of the 1-Series sensor allows for fast diffusion of the gas in the sensor, all with a small, square design. More compact than other detectors, it is less than half the size of other sensors on the market.

3-Year Warranty with a 5-Year Sensor Life

Based on typical use, the 1-Series sensor offers up to a 5-year sensor life and the benefit of a full three-year warranty. This helps to extend the duty cycle of the sensors, reducing the cost of ownership while keeping equipment up and running.

Experienced Sensor Development by Honeywell

The 1-Series is designed and manufactured by City Technologies, which is a Honeywell company. City Technologies has over 4 decades of developing top sensors, including the 40xLL long-life and the 40XV oxygen sensors for the Honeywell BW.

Accurate Readings without Unnecessary Alarms

In temperatures from -40°C to 60°C, the 1-Series sensor provides a reliable source of highly accurate readings. It is also an effective detector in environments where transient pressure or high humidity is a problem for other detectors.

Simple Sensor Replacement

The design of the sensor eliminates the need to access the PCB (Printed Circuit Board) during sensor replacement. Just pop it open and switch out the sensor, all without the need for special tools.

Efficient Fleet Management and Centralized Data Collection

As a system, the use of the Honeywell BW™ Solo, IntelliDox, and Honeywell SafetySuite Device Configurator make it easy to manage data from the entire fleet. At the same time, this also allows for greater safety, productivity, and compliance with industry standards.

Automate RecordKeeping, Testing, and Configuration

The use of IntelliDox technology and docking stations makes it easy to automatically transfer and store results from testing as well as complete specific tests and actions. The detector is placed in to dock to:

• Configure and change set points
• Bump test
• Set bump reminders
• Update firmware
• Calibrate the detector

 

With the use of fleet management software, all data, alarms, and peak readings are easily transferred to a company through a USB or Ethernet connection.

The IntelliDox can be used alone or combined with four other docks into a group. Each dock offers its own control of detectors, as well as a state-of-the-art LCD screen, pump, and individual keypad. Grouped docks share power and calibration gas for efficiency and operational ease.

Adding Device Configurator

The Device Configurator uses Windows-based software, allowing easy data transfer, deployment of firmware updates across the fleet, exporting of data as well as configuration of alarm set points from one central location.

Move to the Cloud

For enhanced control and management for the fleet, upgrade to the Honeywell SafetySuite Device Configurator manager that uses the cloud. This upgrade allows you to:

• See all detectors on one screen for immediate identification of alarms, compliance, and gas events.
• Automated text and email messages of any alarms across the system
• Multiple reporting options
• Centralize report storage and retrieval for audits or as needed
• Increased compliance across multiple sites

 

Make compliance easy through smartphone management of the detector. One easy way to boost compliance, safety, and efficiency is to choose the wireless version of the Honeywell BW™ Solo that integrates with the Honeywell Connected Worker portfolio.

 

The Advantages of the Mobile App

The Device Configurator is designed to work on a smartphone that has been paired with the HoneywellBW™ Solo. The app allows for configuration of the detector, development of set points and alarms, and even firmware updates using BLE or Bluetooth Low Energy technology.

Is efficiency and compliance important? If so, the mobile app can be used to check data, see readings, and even find out who performed the calibration of the detector as well as information about the gas reading. This is automatically entered into the system, and a certificate can be mailed to those who require a copy.

No Docking Station Needed

The choice to use BLE technology eliminates the need for an IntelliDox. The data can be transferred wirelessly to a desktop computer for easy fleet management.

Monitoring Made Simple

Adding the Safety Communicator app to the smartphone allows for immediate transfer of data without the need for docking. The data is sent to Honeywell monitoring software, and it is available to managers in real-time through the app. For managers, this makes monitoring worker location and safety an efficient process.

Ensure Compliance Through Ease of Use

 

The Push of a Button

The easier any technology is to use in the field, the greater the levels of compliance. The Honeywell BW™ Solo is easy to operate with the push of a button, even when wearing gloves or protective gear. The single button or the Honeywell SafetySuite Device Configurator software makes it simple to set all parameters, alarms, and set points, as well as read short-term exposure limit, time-weighted average, and highest concentrations over the last 24 hours.

Visible Safety and Compliance

A quick glance is all it takes to ensure the Honeywell BW™ Solo is compliant. The IntelliFlash™ can be activated to flash green when the detector is monitoring accurately and has been bump tested.

Non-compliance results in a blinking red light, letting you know the detector has a low battery, there has been a gas event, or the system needs calibration or a bump test.

Getting Noticed

The use of flashing lights, audible alarms, and vibration makes it easy to notice if there is an issue or any danger in any type of environment.

Designed to be Practical

 

Easy Monitoring

The detectors can be linked to workers or locations, making it easy to find the problem area in a gas event.

Rolling 24-Hour Readings

Rolling 24-hour readings provide information on the peak gas reading, even without an alarm. This gives you the heads up for potential trouble spots in the system.

Worldwide Use

Used in countries around the world, the Honeywell BW™ Solo can display gas readings in all major languages.

Part Number: BWS-HL-Y

Gas detection for the new generation

 

Service and operation that is practical and easy Sensor options for specific job requirements Replacing the GasAlert Extreme and the ToxiPro®,the Honeywell BW™ Solo provides a range of new features as well as the benefits of the older detectors. The choice of the Honeywell BW™ Solo provides: Lower costs of ownership and operation Higher levels of safety Maximize compliance Connectivity for management

Compact Design

For any job, the Honeywell BW™ Solo offers both high levels of reliability and accuracy, as well as a compact size and lightweight design for use in any location.

Ease of Use

For any gas detection system to be effective, it must be easy to use in the field. The Honeywell BW™ Solo is designed to allow for quick change out of components, without the need for any tools. The door opens to change the sensor filters, and battery and sensor replacement is just as easy.

Full Range of Sensor Options

The Honeywell BW™ Solo can be used across all industries, including in the petrochemical, steel manufacturing, and in power plants. With the sensor options,this small, compact and easy to use detector is able to identify a full range of gases including hydrogen, nitrogen oxide, ozone, hydrogen cyanide, sulfur dioxide, and ammonia.

In addition, the sensor can be used for the detection of:

• Hydrogen sulfide
• Nitrogen dioxide
• Phosphine
• Chlorine dioxide
• Carbon monoxide
• Oxygen
• Chlorine
• Ethylene oxide

 

Introducing The 1-Series Sensor

The 1-Series sensor is a revolutionary, next-generation sensor that provides fast results in even the most challenging working environments. It offers a long duty cycle combined with proven reliability.

Design Benefits

The new design and shape of the 1-Series sensor provides a smaller, slimmer profile with a unique square design. With a height that is one-third of other sensors on the market, it offers rapid diffuses of gases for a fast, accurate reading.

Warranty and Sensor Life

In the past, sensors required constant downtime. To address this issue, the new Honeywell BW™ Solo provides up to five years of sensor life and a warranty of three years. Combining these two factors not only reduced downtime but helps to reduce the cost of operation of each sensor.

Reliability and Dependability in One

Designed and developed by the Honeywell company, City Technology, the 1-Series sensor is the latest in a long line of quality sensors developed in-house. City Technology was responsible for the development of the 40VW and the 40XLL oxygen sensors that are used in the popular Honeywell BW detection systems.

Used in All Environments

The 1-Series sensor is highly accurate and effective in all types of environments. As a handheld sensor, it offers accurate readings in temperature ranges from -40°C to 60°C. It can be used in hazardous environments and where humidity and transient pressure may be a factor.

Easy Sensor Replacement

Thanks to advanced design features, switching out the 1-Series sensor is simple. There is no need to expose the PCB (printed circuit board), making it easy to switch out sensors in the field and on the job.

Data Sharing Made Easy

For easy data sharing and optimal safety, the Honeywell BW™ Solo is fully compatible with the IntelliDox docking station system as well as the Honeywell SafetySuite Device Configurator software.

The IntelliDox Advantage

The use of the IntelliDox docking station system makes it easy to perform tests and transfer information. The detector is placed into the docking station, allowing for automatic transfer of data as well as the option to perform various actions.

The docking station provides the options to do a bump test, complete calibration, set bump reminders, change the set points, and to complete any firmware updates required.

IntelliDox can be used as a single dock, or it can be grouped with up to four other IntelliDox stations. Each independent docking station as a dedicated LCD screen, pump, and keypad, but shares calibration gas and power.

Windows-Based Software

To provide full compliance, the Honeywell SafetySuite Device Configurator software allows easy access to data, with the ability to export data from the detectors. The software makes it convenient and configure system alarm set points and to ensure all systems are up to date on the latest firmware version.

Moving to the Cloud

Honeywell offers a cloud-based monitoring option as well with the Honeywell BW™ Solo. The Honeywell SafetySuite Device Manager offers the following:

• Immediate access to data and alarms on all detectors across the system in real-time.
• Increased versatility in data reporting
• Full communication in the form of emails and text messages as to any alarms
• One central storage area for all reports, making audits and investigations much easier.
• Additional compliance features to enhance your program.

 

Your Smartphone can now control the Honeywell BW™ Solo for maximum convenience and fast response. The wireless feature in the Honeywell Connected Worker portfolio boosts compliance, safety, as well as worksite productivity.

The Advantages of A Mobile App

For anyone working across multiple job sites, using a smartphone to control the Honeywell BW™ Solo allows for maximum productivity. The Device Configurator app is ideal for configuration and deployment of the detector and is effective at distances of up to six meters away. Our systems use Bluetooth Low Energy (BLE), so they are not a drain on your phone.

The app is an effective way to check and review any bump and calibration data. This feature allows for a certificate to be emailed to stakeholders from the app to indicate the gas, the readings, and who performed the calibration. The app also makes it handy to upgrade firmware as needed.

The Bluetooth Advantage

Even if you don't have IntelliDoxdocking stations, BLE allows for sharing of data with the software on your desktop. This is a low-cost way to manage data across the fleet.

Safety Monitoring Made Easy

Loading the Safety Communicator app on smartphones allows for real-time reading of data without the need to dock the detector. When paired with the Honeywell apps, your smartphone becomes a monitoring system, providing immediate information on where workers are located and their safety.

Designed with Safety and Compliance in Mind

 

Single Button Control

No matter where you are working or if you are wearing safety equipment and gloves, operation of the Honeywell BW™ Solo is a one-button operation. The detector can be controlled through the software or with the push of a button, allowing for all alarms, set points and parameters to be easily controlled.

The button also allows for STEL or short-term exposure limit TWA time-weighted average results. Information on the highest concentration of the tested gas is also provided over the previous 24 hours.

Visible Safety

The IntelliFlash™ system allows for the green flashing light to show the detector ass been bump tested and is compliance with monitoring requirements. The noncompliance flash, which is a red blinking light, indicates the need for a battery replacement, a bump test, or if calibration is required. This is also used to signal a detected gas event.

Visual and Audible Alarms

With safety as a priority, the design of the Honeywell BW™ Solo includes red LED lights around the detector along with both ringing and vibrating alarms, ensuring the alarm is seen and heard in any working environment.

Practical and Convenient

 

Immediate Response

With the ability to assign the Honeywell BW™ Solo to workers or in specific locations, a gas event is easy to pinpoint.

Data and Recording

The Honeywell BW™ Solo is designed to allow peak readings of the highest gas level in the past 24 hours. These are not gas events or alarms, but the highest reading for early detection of possible issues.

Multiple Languages

As a global supplier of detection systems, the Honeywell BW™ Solo can be configured for readings in a number of different languages. These include English, Russian, French, Japanese, and Korean, among others.

Part Number: BWS-ML-Y

BW Technologies Replacement PCB Hydrogen (H2) - Standard

Part Number: BWS-R-PCB1

BWS-XL-B BW Solo Single-Gas Detector, (O2) Standard - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS-XL-B

BW Technologies Replacement PCB Ethylene Oxide (ETO) - Wireless

Part Number: BWS1-E-PCB1

BWS1-H2-B BW Solo Single-Gas Detector, (H2S ext range) Wireless - Black by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-H2-B

BW Technologies Replacement PCB Hydrogen (H2) - Wireless

Part Number: BWS1-R-PCB1

BW Technologies Quad Gas CH4 (2.5%), O2 (20.9%), H2S (25ppm), CO (100ppm)

Part Number: CGQ58

BW Technologies Single Gas Cl2 (10 ppm)

Part Number: CG2C1034