BW Technologies Monitors, BW Technologies

Multi-gas Monitor with PID capability for VOC's

Build to order

• Smaller and over 50% lighter than competitive instruments
• Water-resistant design in an integral concussion-proof enclosure
• Continuous LCD shows simultaneous gas concentrations for five gases0 - 1000 ppm measurement of VOCs (Volatile Organic Compounds)
• Integral motorized pump option for remote samplingTwo power options: AA alkaline or rechargeable hot-swappable battery pack
• Provides 95 dB alarm tone and two bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Multi-language support in English, French, German, Spanish, and Portuguese
• Three backlight options: standard- activates in low light (auto), in alarm (auto) and reactivates on-demand; alarm only- activates in alarm conditions and reactivates on-demand; stealth mode
• Four alarm levels: instantaneous Low and High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for VOCs and toxic gases
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Records TWA, STEL, and maximum exposures to gas and displays readings on command
• User selectable field options include: PID correction factor, language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, pass code protection, latching alarm, 'SAFE' display function, stealth mode, and selectable ppm resolution for some gases (e.g. SO2 0.1 ppm)
• Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms

Part Number: XTMPCB2

Part Number: CGG0043N234

DOCK2-2-1C1L-00-N MicroDock II Automatic Test and Calibration Station with GasAlertMicroClip Module (Charging) with Power Supply by BW Technologies

The most cost effective way to manage the calibration and bump testing of BW's portable gas detectors is through the MicroDock II automated test and calibration system. Fully portable and easily expandable, the MicroDock II requires no computer and provides simultaneous management of up to ten modules. Minimize expenses and maximize productivity with the MicroDock II.

• Quick and easy compliance - automatically maintain accurate records
• Automatic bump testing, calibration, record keeping and charging
• One base station with one AC outlet supports up to ten modules to suit your application

MicroDock II Features:

• Fully automatic "hands-free" calibration and functional bump testing
• Automatically verifies performance of audible and visual alarms
• Stores and updates calibration records in the MicroDock II, as well as in datalogging instruments
• Entirely self-contained with no computer required
• Lightweight and fully portable with optional wall mount
• Operates via 6V line power or a set of four C-cell batteries
• Fully customizable
• Add extra self-contained docking modules to system via simple, plug-in connections - no external pressure transducers or gas lines necessary
• Simple, accurate record keeping and fleet management
• Verifies proper performance of detectors
• Reduces maintenance costs
• Multiple MicroDock II systems can be connected via a LAN
• Includes BW Fleet Manager software for easy data analysis
• Multi-language support in English, French, German, Spanish and Portuguese

Part Number: DOCK221C1L00N

BW Technologies Collapsible Sampling Probe with Handle

This particular attachment is ideal for pick hole sampling and for drawing samples in hard to reach places. This collapsible sampling probe is approximately 3.3 feet (1 meter) in length. The probe has a comfort grip that helps to ensure proper use when in hazardous conditions. The attachment also easily collapses into a compact and portable travel unit. When collapsed, the device can easily fit into a utility belt or pocket. To determine whether or not the BW Technologies Collapsible Sampling Probe with Handle is compatible with your device, please consult the product specification sheet.

Part Number: GACPROB1

DOCK2-3-1J-00-G MicroDock II Automatic Test and Calibration Station with GasAlertMicro 5 Series Module (Non-charging) with 3 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK231J00G

DOCK2-4-1K-00-G MicroDock II Automatic Test and Calibration Station with 1 fresh air and 3 gas inlet(s), 1 GasAlertMicro 5 Series module(s) with charging (not compatible with ClO2 or O3), without charging power supply by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK241K00G

BW Clip 3 Year Single Gas Detector by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: POWERUPS01

Part Number: DOCK201N00G

Part Number: HOSE275

MC-CK-CC Carrying Case for GasAlertMicroClip

This case is made from durable aluminum and rugged enough to withstand most environments. The case can be carried with the attached handle or slung over your shoulder with the included 4 ft strap.

Roomy and spacious enough to carry all of your accessories and the GasAlertMicroClip. The foam cut-outs have custom inserts for the calibration cylinder, regulator, detector, sampling hose, screwdrivers, connectivity kit, and large pockets hold miscellaneous tools and items.

Keep your monitor safe and in like-new condition by keeping it in this specially designed case.

Part Number: CG2P134

BW Technologies Dummy Sensor for 3-Pin O2 or 3-Pin Twin Tox Locations

The BW Technologies Dummy Sensor for 3-Pin O2 or 3-Pin Twin Tox Locations is a dummy sensor that acts as a placeholder for the device. This dummy sensor does not detect gases and does not initiate the alarm sequence on the device. The sensor can be used for training and storage purposes. This cost effective dummy sensor fits several BW Technologies products.

Part Number: SRDUMM1

Part Number: XTSS1

Part Number: GAPA1

Part Number: D4AS01

Part Number: CGBUMP1

GA24XT-S GasAlertClip Extreme 2 Year Single Gas Detector Sulfur Dioxide (SO2) by BW Technologies

Ongoing product research enables BW Technologies to develop the most advanced workplace safety instruments in the industry. With incredible durability, accuracy, and reliability, the GasAlertClip Extreme is designed to monitor single gases in various settings and alert users of potentially unsafe situations. As technology advances, the standards of safety evolve. The GasAlertClip offers the very best of current technology at a low cost. This ensures that users and worksites can remain cost efficient with technology upgrades. Utilizing the most advanced technology, the highest safety standards, and cost efficiency, BW Technologies has created a single gas detector that is certain to meet the needs of the modern work environment.

Features

An accurate and reliable gas detection system is the most important safety instrument when working in mining, construction, fire and emergency services, confined spaces, and other potentially dangerous settings. The GasAlertClip Extreme is designed to withstand the harshest of environments and deliver consistently reliable alerts for up to 3 years. The durable outer casing protects the internal sensors from damage and renders the unit water resistant.

To ensure reliability and effectiveness, users can perform periodic self-tests of sensors, batteries, circuits, and alarms. The unit also performs a self-test upon activation and every 20 hours. Additionally, the battery is automatically tested every 2 hours to ensure the user can rely on the unit's warnings.

Maintenance free

The GasAlertClip Extreme also features maintenance free technology that is user friendly and easy to understand. The clip is available in both 2 year and 3 year versions. During the instrument's lifespan, the device will not require calibration tests, sensor replacement, batter replacement, or recharging of batteries. Users will find the GasAlertClip Extreme to be easy to use and with minimal training requirements. The various clips for different gases also feature color coded labels to distinguish between different gas detectors and LCD indicators. Users will also be able to manage alarm settings with ease and view information on the large LCD display such as the remaining life of the device and visual alarm bars.

Datalogging and alarms

Record keeping is a standard feature of the GasAlertClip Exteme. The clip will automatically record and transmit gas alarm events. This can provide valuable information to worksite managers assessing gas trends in various worksites. The alarm system includes visual alarms, vibrating alarms, and audible alarms of over 95 decibels. Workers with hearing or visual impairments or workers in loud settings will find the triple alarm system to be a valuable safety feature.

Compatibility and accessories

The GasAlertClip Extreme is compatible with a variety of test systems and accessories. The MicroDock II is a compatible automatic testing system. Accessories such as the concussion-proof boot, bulk packaging, and IR DataLink are also available. At 2.7 ounces and approximately 1 inch by 2 inches by 3 inches, the device is highly portable, lightweight, and comfortable to wear. The typical battery life is 2 or 3 years, depending on the version of the device, and the GasAlertClip Extreme is standard with a 2 to 3 year warranty from the date of activation.

Part Number: GA24XTS

Part Number: CG2F2.0103

Part Number: GACL1

Part Number: MCXLBC1

GAXT-A2-DL-B GasAlert Extreme Detector Ammonia (NH3) Extended Range with Black Housing by BW Technologies

Designed with durability and comfort in mind, the GasAlert Extreme reliably monitors for any single gas hazard within its wide range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a two year fi eld-replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW's MicroDock II automatic test and calibration system. A wide range of user options, multilanguage display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.

• Direct, real-time readings on large LCD
• Operates through consecutive shifts - exceptional battery run-time
• Secure and accurate history with datalogging

Standard features of BW products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlert Extreme features:

• Equipped with internal vibrating alarm for high noise areas
• Secure and accurate history with datalogging
• Multi-language support in English, French, German, Spanish and Portuguese
• Tamper-proof settings with passcode protection

Part Number: GAXTA2DLB

Part Number: GATC1