Bluelab

MONGUACONIN Guardian Monitor Inline Connect by Bluelab

All the great features of the Bluelab® Guardian Connect™ in an in-line system.

Threaded probe heads allow for simple installation direct into an irrigation line for effective in-line measurements. Suitable for use before or after mechanical injectors.

Both conductivity and pH probes can screw directly into female 1" NPT pipe fittings using the included adapter.

Teamed with the Bluelab® Connect™ Stick, you get all the convenience of wireless data logging and remote alerts.

In-line pH probe cable length: 3 meters / 10 feet

Features

• pH and EC in-line threaded probes to fit into in-line plumbing
• Remote viewing with Bluelab® Connect™ Software and Apps
• Replaceable double junction high pressure pH probe included
• Bright, plant-safe green LED with adjustable brightness
• Easy to navigate menu to program & adjust settings
• Selectable conductivity and temperature scales
• Simple push button pH calibration
• No calibration required for conductivity and temperature (factory calibrated)
• Flashing high and low alarms (non-audible)
• Built with greater tolerance to RF / electronic interference
• International power supply

PWRSGUAR Guardian Monitor Power Supply by Bluelab

Use the international power supply pack with any Bluelab Guardian Monitor.

Power Out: 5V DC, 1Amp

PH4250BL pH 4.0 Calibration Solution 250ml. carton of 6 by Bluelab

Calibration and conductivity standard solutions... a must in every grower's toolbox.

The Bluelab® calibration and conductivity standard solutions are essential for use with all Bluelab® products.

Bluelab® solutions are manufactured specifically for Bluelab® products and are referenced to high laboratory standards to ensure your Bluelab® products last longer and maintain accuracy.

CONSTICK2 Connect Stick 2 by Bluelab

Product Features / Benefits

• Receive wireless data from Bluelab Connect devices to your computer and smartphone
• View data and device status remotely (required: computer with permanent internet access)
• View data and get alerts on your smartphone or tablet
• Send wireless data up to 100 m/330 ft (typically indoors)
• Send wireless data up to 400 m/1312 ft in open space (line of sight)
• Receive data from up to 50 Connect devices with one Connect Stick
• Easy access to Bluelab Connect software

SAMTUB Sample Tube and Fitting by Bluelab

Product Features / Benefits

• Perfect for reservoirs located more than 2 metres / 6.6 feet from your controller unit. Place probes directly into the tube ports for direct measurement of nutrient solution
• Fittings included

SPOTKIT Sample Pot by Bluelab

Perfect for reservoirs located more than 2 meters / 3.3 feet from your controller unit.

Place probes directly into the chamber for direct measurement of nutrient solution. Fittings include

PERILUBE Peridoser Tube Lube. 15cc Syringe by Bluelab

The tube lube is required for lubricating the tubing every six months and when replacing the tubing. It comes in a handy 15cc syringe for easy application.

It is a specialized silicone grease and is the only grease that can be used to lubricate the Peridoser Pumps.

803250 EC Shroud (for all Bluelab Conductivity Probes) by Bluelab

The 'Shroud' (found at the probe) is very important for the accuracy and protection of the meter.

The shroud carries out three crucial functions:

• Protects the probe tip from damage
• Slows the movement of the solution to get a more accurate reading
• The slots allow an even flow of solution to pass through to avoid air bubbles on the probe surface

The shroud is removed prior to the cleaning process.

CAREKITCON Probe Care Kit - Conductivity by Bluelab

Product Features / Benefits

• Probe care instructions
• Two 20 ml single-use sachets of Bluelab 2.77 EC conductivity standard solution
• One plastic cup
• Bluelab Conductivity Probe Cleaner
• Chamois for cleaning your conductivity probe

CAREKITPH Probe Care Kit - pH by Bluelab

Product Features / Benefits

• Probe care instructions
• 20 ml single-use Bluelab Solution Sachets - two each of: pH 7.0, pH 4.0 and KCl solutions
• Three plastic cups
• Bluelab pH Probe Cleaner
• Toothbrush for cleaning your pH probe

CAREKITPHCON Care Kit pH Probe & Conductivity by Bluelab

Product Features / Benefits

• Probe care instructions
• 20 ml single-use Bluelab Solution Sachets - two each of: pH 7.0, pH 4.0, KCl and 2.77 EC standard solution
• Three plastic cups
• Bluelab pH Probe Cleaner
• Bluelab Conductivity Probe Cleaner
• Toothbrush for cleaning your pH probe
• Chamois for cleaning your conductivity probe

CAREKITPHCONL Probe Care Kit - pH & Conductivity by Bluelab

Probe cleaning is one of the most important parts of owning or operating any Bluelab® meter, monitor or controller.

The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, then the reading will be inaccurate.

Accurate readings simplify crop management and provide improved growth.

Use Bluelab® Solutions to re-stock your probe care kit.

Features

• 20ml / 0.67fl oz single-use Bluelab Solution Sachets, 2 each of: pH 7.0 & pH 4.0, KCl and 2.77 EC
• 3 plastic cups
• Bluela® pH Probe Cleaner
• Bluelab® Conductivity Probe Cleaner
• Bluelab® Toothbrush (pH probe cleaning instrument)
• Bluelab® Chamois (conductivity probe cleaning instrument)

CAREKITPHL Probe Care Kit - pH by Bluelab

Probe cleaning is one of the most important parts of owning or operating any Bluelab® meter, monitor or controller.

The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, then the reading will be inaccurate.

Accurate readings simplify crop management and provide improved growth.

Use Bluelab® Solutions to re-stock your probe care kit.

Features

• 20ml / 0.67fl oz single-use Bluelab Solution Sachets, 2 each of: pH 7.0 & pH 4.0 and KCl
• 3 plastic cups
• Bluelab® pH Probe Cleaner
• Bluelab® Toothbrush (pH probe cleaning instrument)

CONEXTEND Connect Range Extender by Bluelab

Simply plug the Bluelab® Connect™ Range Extender into a power supply between Bluelab® Connect™ Devices and Bluelab® Connect™ Stick to increase the signal.

For extra-long distances multiple Bluelab® Connect™ Range Extenders can be used.

Features

• Bluelab® Connect™ Range Extender
• International Power Supply *may differ from image shown
• Increases range or signal strength Bluelab® Connect™ products
• Installation instructions included

Ideal for use with

• Bluelab® Guardian Monitor Connect™
• Bluelab® Connect™ Stick

CONEXTEND2 Connect Range Extender 2 by Bluelab

Product Features / Benefits

• Increases Connect wireless range by a further 100 metres/330 feet (typically indoors)
• Link multiple Range Extenders for extra-long range (up to 700 metres/2300 feet)
• Water resistant for peace of mind
• International power supply included for easy use anywhere
• Easy access to Bluelab Connect software

CONSTICK Connect Stick by Bluelab

Collects information wirelessly from Bluelab® Connect™ devices to your computer.

One Bluelab® Connect™ Stick receives data wirelessly from multiple Bluelab® Connect™ devices.

Download the free Bluelab® Connect™ software, to get grow site data direct to your local computer and mobile app. Get connected

Features

• Data logging capability (when used with Bluelab® Connect™ products, sold separately)
• Free Bluelab® Connect™ Software available online
• View data and current status remotely (A computer with permanent internet access is required)
• Installation instructions

Ideal for use with

• Bluelab® Guardian Monitor Connect™
• Bluelab® Connect™ Range Extender

CONTPH pH Controller by Bluelab

Fine-tunes the reservoir pH levels for you. Confidence - your pH is taken care of.

Automatic measuring and adjusting to pre-set pH levels with optional alarms. Provides consistent control of pH in growing sytems.

Intuitive "on time" and "off time" allows the solution to dose and mix before the controller measures and doses again.

Reassurance with safety lockouts to prevent over delivery of pH.

Probe cable length: 2 meters / 6.5 feet

Features

• Automatic control of pH level in systems with reservoirs up to 200 gallons / 760 litres
• Dose either pH up or pH down adjusters
• Replaceable double junction pH probe & peristaltic pump
• Plant-safe green backlit LCD with adjustable brightness
• Large, easy to read display
• Easy to navigate menu to adjust settings
• Simple push button pH calibration with on screen instructions
• Flashing high and low alarms with control lockouts
• Water resistant, wall mount design
• Separate Bluelab® Temperature Probe (for pH ATC)

CONTPHCON pH Controller Connect by Bluelab

24/7 data logging and visibility of your reservior pH levels wherever you are.

All the same features as the Bluelab® pH Controller, with added benefits of Bluelab® Connect™ Software.

Automatic measuring and adjusting to preset pH levels with alarms. Wireless data logging to your computer and mobile app via the Bluelab® Connect™ Stick, provides continuous information at your fingertips. Use the data collected to make changes faster for a thriving crop.

Probe cable length: 2 meters / 6.5 feet

Features

• Automatic control of pH level in systems with reservoirs up to 200 gal. / 760L
• Dose either pH up or pH down adjusters
• Remote viewing with Bluelab® Connect™ Software and Apps
• Plant-safe green backlit LCD with adjustable brightness
• Large, easy to read display
• Easy to navigate menu to adjust settings
• Simple push button pH calibration
• Flashing high and low alarms with control lockouts
• Water resistant, wall mount design
• Seperate Bluelab® Temperature Probe (for pH ATC)
• Replaceable double junction pH probe & peristaltic pump

DIBBER Replacement Dibber/Auger for Soil pH Probe by Bluelab

This handy dibber is used to pierce the soil prior to inserting the soil pH probe to eliminate the risk of sticks or stones breaking the glass tip of the soil probe.

There are units of measurement on the side, with centimeters and inches, so you can measure pH at consistent levels.