Bluelab

PHPROBECAP pH Probe - Screw Type Storage Cap by Bluelab

It is essential that the storage cap is placed back on the probe tip of the pH probe after use and when being stored. "If it dries it dies!"

Keep the pH probe tip wet by ensuring there is enough Bluelab pH Probe KCl Storage Solution to cover the probe

803250 EC Shroud (for all Bluelab Conductivity Probes) by Bluelab

The 'Shroud' (found at the probe) is very important for the accuracy and protection of the meter.

The shroud carries out three crucial functions:

• Protects the probe tip from damage
• Slows the movement of the solution to get a more accurate reading
• The slots allow an even flow of solution to pass through to avoid air bubbles on the probe surface

The shroud is removed prior to the cleaning process.

CAREKITCONL Probe Care Kit - Conductivity by Bluelab

Probe cleaning is one of the most important parts of owning or operating any Bluelab® meter, monitor or controller.

The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, then the reading will be inaccurate.

Accurate readings simplify crop management and provide improved growth.

Use Bluelab® Solutions to re-stock your probe care kit.

Features

• 2x 20ml / 0.67fl oz single-use Bluelab® 2.77 EC Conductivity Standard Solution Sachets
• 1 plastic cup
• Bluelab® Conductivity Probe Cleaner
• Bluelab® Chamois (probe cleaning instrument)

CAREKITPHCONL Probe Care Kit - pH & Conductivity by Bluelab

Probe cleaning is one of the most important parts of owning or operating any Bluelab® meter, monitor or controller.

The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, then the reading will be inaccurate.

Accurate readings simplify crop management and provide improved growth.

Use Bluelab® Solutions to re-stock your probe care kit.

Features

• 20ml / 0.67fl oz single-use Bluelab Solution Sachets, 2 each of: pH 7.0 & pH 4.0, KCl and 2.77 EC
• 3 plastic cups
• Bluela® pH Probe Cleaner
• Bluelab® Conductivity Probe Cleaner
• Bluelab® Toothbrush (pH probe cleaning instrument)
• Bluelab® Chamois (conductivity probe cleaning instrument)

CAREKITPHL Probe Care Kit - pH by Bluelab

Probe cleaning is one of the most important parts of owning or operating any Bluelab® meter, monitor or controller.

The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, then the reading will be inaccurate.

Accurate readings simplify crop management and provide improved growth.

Use Bluelab® Solutions to re-stock your probe care kit.

Features

• 20ml / 0.67fl oz single-use Bluelab Solution Sachets, 2 each of: pH 7.0 & pH 4.0 and KCl
• 3 plastic cups
• Bluelab® pH Probe Cleaner
• Bluelab® Toothbrush (pH probe cleaning instrument)

CONEXTEND Connect Range Extender by Bluelab

Simply plug the Bluelab® Connect™ Range Extender into a power supply between Bluelab® Connect™ Devices and Bluelab® Connect™ Stick to increase the signal.

For extra-long distances multiple Bluelab® Connect™ Range Extenders can be used.

Features

• Bluelab® Connect™ Range Extender
• International Power Supply *may differ from image shown
• Increases range or signal strength Bluelab® Connect™ products
• Installation instructions included

Ideal for use with

• Bluelab® Guardian Monitor Connect™
• Bluelab® Connect™ Stick

CONSTICK Connect Stick by Bluelab

Collects information wirelessly from Bluelab® Connect™ devices to your computer.

One Bluelab® Connect™ Stick receives data wirelessly from multiple Bluelab® Connect™ devices.

Download the free Bluelab® Connect™ software, to get grow site data direct to your local computer and mobile app. Get connected

Features

• Data logging capability (when used with Bluelab® Connect™ products, sold separately)
• Free Bluelab® Connect™ Software available online
• View data and current status remotely (A computer with permanent internet access is required)
• Installation instructions

Ideal for use with

• Bluelab® Guardian Monitor Connect™
• Bluelab® Connect™ Range Extender

CONTPH pH Controller by Bluelab

Fine-tunes the reservoir pH levels for you. Confidence - your pH is taken care of.

Automatic measuring and adjusting to pre-set pH levels with optional alarms. Provides consistent control of pH in growing sytems.

Intuitive "on time" and "off time" allows the solution to dose and mix before the controller measures and doses again.

Reassurance with safety lockouts to prevent over delivery of pH.

Probe cable length: 2 meters / 6.5 feet

Features

• Automatic control of pH level in systems with reservoirs up to 200 gallons / 760 litres
• Dose either pH up or pH down adjusters
• Replaceable double junction pH probe & peristaltic pump
• Plant-safe green backlit LCD with adjustable brightness
• Large, easy to read display
• Easy to navigate menu to adjust settings
• Simple push button pH calibration with on screen instructions
• Flashing high and low alarms with control lockouts
• Water resistant, wall mount design
• Separate Bluelab® Temperature Probe (for pH ATC)

CONTPHCON pH Controller Connect by Bluelab

24/7 data logging and visibility of your reservior pH levels wherever you are.

All the same features as the Bluelab® pH Controller, with added benefits of Bluelab® Connect™ Software.

Automatic measuring and adjusting to preset pH levels with alarms. Wireless data logging to your computer and mobile app via the Bluelab® Connect™ Stick, provides continuous information at your fingertips. Use the data collected to make changes faster for a thriving crop.

Probe cable length: 2 meters / 6.5 feet

Features

• Automatic control of pH level in systems with reservoirs up to 200 gal. / 760L
• Dose either pH up or pH down adjusters
• Remote viewing with Bluelab® Connect™ Software and Apps
• Plant-safe green backlit LCD with adjustable brightness
• Large, easy to read display
• Easy to navigate menu to adjust settings
• Simple push button pH calibration
• Flashing high and low alarms with control lockouts
• Water resistant, wall mount design
• Seperate Bluelab® Temperature Probe (for pH ATC)
• Replaceable double junction pH probe & peristaltic pump

CONTPRO Pro Controller Connect by Bluelab

Full control of reservoir pH, conductivity and temperature in one place.

When connected to a dosing system the Bluelab® Pro Controller™ manages pH, conductivity and temperature levels in reservoirs. As your plants feed, pH and nutrients are automatically adjusted to the desired range.

Monitor, data log and control your system in real time for immediate response to personalised settings and system alerts, direct from your computer. Customise your system set up by pairing with Bluelab® PeriPod™s; and optional Bluelab® PowerPod™, Bluelab® Alarm Box and/or Bluelab® Sample Pot.

Probe cable length: 2 meters / 6.5 feet

Use Bluelab® PowerPod™ to connect to other mains operated dosers and/or heating or cooling devices

Features

• Control pH, conductivity and temperature when connected to a doser
• Easy to navigate menu to program and adjust settings
• Remote viewing with Bluelab® Connect™ Software and Apps
• Bright, plant-safe green LED with adjustable brightness
• Simple pH calibration with on screen instructions
• High and low alarm control lockouts
• Auto resume dosing on restart after power loss
• Dosing lockouts to protect from over-dosing
• Replaceable Bluelab® probes