Agrowtek

DXR6 Dry-Contact 6-Output Relay Module by Agrowtek

DXR6 digital control interface features six (6) 1-Amp dry-contact relay outputs rated 30Vac/Vdc. Ideal for interfacing with 24Vac control signals for HVAC, dehumidifiers, and other mixed voltage control signals.

Connects instantly to Agrowtek's master control systems or intelligent sensors via a GrowNET port for advanced automated control functions. GrowNET port accepts MODBUS RTU communication for PLC control.

LED indicators on the front panel provide status of power supply and data communications. Designed for DIN rail mounting in control cabinets.

Features

• Six (6) 1-Amp Dry Contact Relay Outputs
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC applications 9-24Vdc, DIN rail mount
• Made in USA
• 1-Year Warranty

Applications

• HVAC Systems 24Vac heat, cool, fan, valve & other signals
• Dehumidifiers
• Custom Equipment
• Irrigation Solenoid Valves

GrowControl™ SXW Outdoor Weather Sensor by Agrowtek

GrowControl SXW Weather Monitor & Controller is a precision digital outdoor climate monitor featuring temperature, relative humidity, ambient light, and optionally CO2 ppm sensors. Also includes inputs for Agrowtek's wind speed anemometer, wind direction vane, and IR rain sensors. Housed in a rugged stainless steel enclosure and designed for pole or wall mounting.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol

Sensors

• Air Temperature: -20 - 60°C
• Relative Humidity: 0-99% RH
• Light (Irradiance): 0-2000 Watts/m2
• Carbon Dioxide (optional): 0-10,000 ppm
• Barometric Pressure (optional): mm-Hg, in-Hg
• Wind Speed: 0-100 mph, kmh
• Wind Direction: 0 - 359°
• Rain
• Real Time Clock (RTC): Battery Backup optional
• Fan aspirated with air filter for high accuracy

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ Digital Communication Port
• MODBUS RTU via LX2 ModLINK Optional 4-channel 4-20mA analog outputs
• Weather-proof stainless-steel enclosure
• 1-Year Warranty
• Made in USA

AgrowDose™ AD2i Dual Intelligent Dosing Pump by Agrowtek

AgrowDose AD2 "dual" peristaltic dosing pump with two independent pump heads for injecting nutrient solutions, pH buffers, chlorine, chemicals, food and beverage mixing, and more. Pump precise volumes of liquids at variable flow rates into reservoirs or pressurized lines (up to 25psi.)

AgrowDose pumps connect instantly to Agrowtek's intelligent SXH and PHX dosing controllers through the GrowNET™ port for advanced automated dosing functions. Use stand-alone with the LX1 USB AgrowLINK for PC batch dosing, or the LX2 ModLINK for MODBUS.

Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Two independent dosing pumps
• Precision dosing accuracy
• 12V DC input power: 120V Wall adapter included
• Easy-change pump heads: Twist & replace; no tools required
• 1-Year Warranty
• WiFi optional
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC control: Independent variable speeds, reversable
• Durable powder-coated steel enclosure
• Made in USA

GrowControl™ MDX1 Dosing Panel (single pump, A size panel) by Agrowtek

MDXP Modular Dosing Panels automate nutrient dosing and pH control (+ORP) in large or small nutrient stock tanks for re-circulating or drain-to-waste fertigation systems. These pre-assembled panels come ready to dose! Just connect the water manifold to your system and plug in power! Controller, dosing pumps and water manifold are all conveniently mounted on a stainless steel back panel simplifying installation and providing a clean appearance. Available in 1, 2, 4 or 5 pump configurations. Each pump can be configured for pH up/down, EC nutrient dosing or ORP as required. SXH hydro sensor with LCD display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more in a simple to use menu interface. Monitor remotely from any web browser and send email alerts with the optional WiFi module.

AgrowDose peristaltic pumps have legendary reliability, are self-priming, draw over 10ft of lift and pump into lines up to 25psi (up to 45psi with high-pressure check-valve kit.) Pumps feature easy-maintenance with no-tool, twist-off replaceable heads. Stainless steel back-panel makes installation as simple as hanging on a wall and connecting plumbing.

GrowControl™ PHX pH/Temp Sensor by Agrowtek

GrowControl PHX and PHX+ are precision digital sensor transmitters for temperature and pH, plus optional ORP. Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. Available with WiFi module for stand-alone or remote monitoring, data logging, alerts, and more.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol communication.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications: Available 4-20mA analog outputs
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

RX1 Single Outlet Relay for GC-Pro/XL, 120V 12A by Agrowtek

RX1 relay plugs into a standard wall outlet and switches its outlet on when 24Vdc is supplied to the 'trigger' terminals (relay coil.) Mount the RX1 in any wall outlet and plug equipment to be controlled into the RX1.

To operate the RX1 the trigger is connected to any desired output on the GC-Pro controller. To operate the RX1's trigger input from a 120V outlet on the GC-Plus or other controlled outlet use the RX-T trigger cord kit.

Features

• Wire direct to GC-Pro outputs
• 24Vdc Relay coil voltage
• Removable terminal block for trigger wires
• Heavy duty UL flame rated enclosure
• Fully grounded with securing screw tab
• 15A / 120Vac rated
• 2-Year full factory warranty Made in USA

LX1 USB AgrowLINK by Agrowtek

LX1 USB AgrowLINK™ connects Agrowtek's GrowNET™ sensors, relays or dosing pumps directly to a computer. Free PC software displays real-time sensor readings, downloads and configures data logging history from the sensor, allows on-board calibration, basic email alerts, recipie batch dosing and more!

Connects to any Agrowtek device with a GrowNET™ port. Use the simple update software to upgrade device firmware in seconds when new features are added! Add multiple GrowNET™ devices using HX8 multi-port GrowNET™ hubs.

Communicate directly to GrowNET™ intelligent devices using MODBUS RTU or the expanded GrowNET™ command set.

Features

• GrowNET™ Device: Programmer / Data Link
• USB connection for PC
• Tough ABS plastic enclosure
• Made in USA
• 1-Year Warranty

GND-25 1/4" I.D. Probe Gland (temperature probes) by Agrowtek

Probe glands allow installation of pH, ORP, EC and temperature probes directly inline with pump feeds or a dedicated recirculating pump loop. Inline installation extends probe life by washing away debris and keeping probes clean. Increased accuracy also results from recirculation of liquid to provide a more homogenous mixture.

• 1/2" NPT Male Pipe Thread
• Nylon body

RX1i Digital Intelligent Single Outlet Relay, 120V 12A by Agrowtek

Convenient single relay-controlled outlet to be operated by GrowControl™ cultivation control systems. Control any piece of equipment up to 12A/120V. Red LED indicator light turns on when AC power is activated to the receptacle. RX1i can be located in any standard wall outlet and easily moved as needed.

Digital GrowNET port allows MODBUS protocol control on RS485 bus networks for custom applications.

UL flame rated enclosure & fully grounded for safety. Made in USA.

SXL-1X Optical Liquid Sensor, WET-ON (Latching) by Agrowtek

Electronic optical liquid sensors are durable, have no moving parts and are easy to maintain. SXL sensors can detect fluid levels in tanks, flow in pipes, or leaks in drip pans when liquid touches the sensor tip. Wide voltage range and high current capacity makes the SXL sensor practical for TTL logic, industrial PLC or direct relay control applications. 1/4" NPT threading and removable wiring terminal block with pin-out cast into the hex head makes installation or replacement fast and simple. When the output is energized a red LED illuminates the sensor body giving a visual status indication. Available in 'wet-on' and 'dry-on' configurations, or PWM output for applications requiring error indication and failure monitoring. Other intelligent functions include "stable state" switching to detect splashing, one-second output debounce and error indication from infrared flooding.

Applications

• Water Tanks
• Coolant Reservoirs
• Hydraulic Fluid Reservoirs
• Warewash Equipment
• Irrigation Systems
• High & Low Level Detection
• Leak & Overflow Detection
• Flow Detection in Pipes
• Automatic Fill/Drain Level Control

AgrowDose™ AD1 Peristaltic Dosing Pump by Agrowtek

AgrowDose AD1 dosing pump is a rugged and economical singlehead peristaltic pump designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 20psi.

AD1 Pump operates at a fixed speed (~50mL/min) when powered and requires a controlled outlet to operate the pump (such as RX1 or RX4.) Includes a standard wall plug power supply.

Pump heads feature an intlet tube and an outlet tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Single dosing pump
• Precision dosing accuracy: Fixed flow rate, non-reversable
• Easy-change pump heads: Twist & replace; no tools required
• Durable powder-coated steel enclosure
• Made in USA
• 1-Year Warranty

Typical Applications

• Agricultural Nutrient or pH Dosing
• Industrial Chemical Dispensing
• Laboratory Dispensing
• Aquarium
• Pool & Spa
• OEM & Custom Applications

AgrowDose™ AD1i Single Intelligent Dosing Pump by Agrowtek

AgrowDose AD1 "single" peristaltic dosing pump for injecting nutrient solutions, pH buffers, chlorine, chemicals, food and beverage mixing, and more. Pump precise volumes of liquids at variable flow rates into reservoirs or pressurized lines (up to 25psi.)

AgrowDose pumps connect instantly to Agrowtek's intelligent SXH and PHX dosing controllers through the GrowNET™ port for advanced automated dosing functions. Use stand-alone with the LX1 USB AgrowLINK for PC batch dosing, or the LX2 ModLINK for MODBUS.

Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Single dosing pump
• Precision dosing accuracy < 1mL: Variable speed, reversable
• 12V DC input power: 120V Wall adapter included
• Easy-change pump heads: Twist & replace; no tools required
• 1-Year Warranty
• WiFi optional
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC control: Independent variable speeds, reversable
• Durable powder-coated steel enclosure
• Made in USA

AgrowDose™ AD2 Dual Peristaltic Dosing Pump by Agrowtek

AgrowDose™ AD dosing pumps are rugged and economical single, dual or quad-head peristaltic pumps designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 25psi when controlled by Agrowtek's GC-Pro/XL series cultivation control systems.

Pump heads feature an inlet suction tube and an outlet pressure tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir or use our PBX series manifolds to dose into a recirculating and monitoring loop. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

AgrowDose™ pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller's outputs such as the GC-Pro or GC-ProXL. Built-in relays on the AD2 and AD4 pumps switch power from the included wall adapter to operate the pump motors. (AD1 does not have control a relay built into pump.)

Quick-change pump head offers fast, easy maintenance when tubing wears out.

• 120Vac/12Vdc Power adapter included for motors
• 1/4" OD x 3/16" ID FDA Tubing
• ~50mL/min per pump

Applications

• Greenhouses & Growing Facilities Hydroponics pH Control
• Agricultural & Aquaponics
• Aquarium
• Pool & Spa
• Analytical, Research & Academic
• Industrial Process Water, General Purpose

AgrowDose™ AD4 Quad Peristaltic Dosing Pump by Agrowtek

AgrowDose™ AD dosing pumps are rugged and economical single, dual or quad-head peristaltic pumps designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 25psi when controlled by Agrowtek's GC-Pro/XL series cultivation control systems.

Pump heads feature an inlet suction tube and an outlet pressure tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir or use our PBX series manifolds to dose into a recirculating and monitoring loop. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

AgrowDose™ pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller's outputs such as the GC-Pro or GC-ProXL. Built-in relays on the AD2 and AD4 pumps switch power from the included wall adapter to operate the pump motors. (AD1 does not have control a relay built into pump.)

Quick-change pump head offers fast, easy maintenance when tubing wears out.

• 120Vac/12Vdc Power adapter included for motors
• 1/4" OD x 3/16" ID FDA Tubing
• ~50mL/min per pump

Applications

• Greenhouses & Growing Facilities Hydroponics pH Control
• Agricultural & Aquaponics
• Aquarium
• Pool & Spa
• Analytical, Research & Academic
• Industrial Process Water, General Purpose

AgrowDose™ AD4i Quad Intelligent Dosing Pump by Agrowtek

AgrowDose AD4 "quad" peristaltic dosing pump with four independent pump heads for injecting nutrient solutions, pH buffers, chlorine, chemicals, food and beverage mixing, and more. Pump precise volumes of liquids at variable flow rates into reservoirs or pressurized lines (up to 25psi.)

AgrowDose pumps connect instantly to Agrowtek's intelligent SXH and PHX dosing controllers through the GrowNET™ port for advanced automated dosing functions. Use stand-alone with the LX1 USB AgrowLINK for PC batch dosing, or the LX2 ModLINK for MODBUS.

Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Four independent dosing pumps
• Precision dosing accuracy < 1mL: Variable speed, reversable
• 12V DC input power: 120V Wall adapter included
• Easy-change pump heads: Twist & replace; no tools required
• 1-Year Warranty
• WiFi optional
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC control: Independent variable speeds, reversable
• Durable powder-coated steel enclosure
• Made in USA

AgrowDose™ AD5i Penta Intelligent Dosing Pump by Agrowtek

AgrowDose AD5 "penta" peristaltic dosing pump with five independent pump heads for injecting nutrient solutions, pH buffers, chlorine, chemicals, food and beverage mixing, and more. Pump precise volumes of liquids at variable flow rates into reservoirs or pressurized lines (up to 25psi.)

AgrowDose pumps connect instantly to Agrowtek's intelligent SXH and PHX dosing controllers through the GrowNET™ port for advanced automated dosing functions. Use stand-alone with the LX1 USB AgrowLINK for PC batch dosing, or the LX2 ModLINK for MODBUS.

Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Five independent dosing pumps
• Precision dosing accuracy < 1mL: Variable speed, reversable
• 12V DC input power: 120V Wall adapter included
• Easy-change pump heads: Twist & replace; no tools required
• 1-Year Warranty
• WiFi optional
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC control: Independent variable speeds, reversable
• Durable powder-coated steel enclosure
• Made in USA

AgrowTouch™ Color Touch Screen for GC-Pro by Agrowtek

AgrowTouch 3.5" color touch screen interface for the GrowControlTM GC-Pro and GC-Plus climate controllers. These industrial grade touch screens are lighting fast and offer the ultimate in convenience for monitoring and managing your controller.

Get instant access to all controller functions including:

• Manual overrides for all outputs and inputs
• Manually turn system on or off
• Full control of all settings
• Visual trend graph for all sensor readings
• Alarm history for the last 10 alarms

Also includes:

• Administrator and user lock-out and password protection
• Screen saver which turns off back light after 30 minutes

Specifications

• 4" Display
• 256 Colors
• For GC-Pro or GC-Plus
• 1 Year Warranty, Made in USA

CAB-DIN6-MM15 15ft Sensor Cable by Agrowtek

6-pin DIN analog sensor cables for GrowControl™ GC-Pro/XL controllers. Connect SXC climate sensors and SXH hydroponics sensors to the controller's sensor ports using these standard cables. 15ft. sensor cable is included with each sensor; 50ft extension cables may be connected to the 15ft sensor cable to extend the length as required.

CAB-GX100 GrowNET Patch Cable, 100ft by Agrowtek

Agrowtek standard GrowNET™ patch cable (RJ-45 / cat5e) for connecting GrowNET™ devices. UTP 30AWG flat cables are available in various lengths.

• GrowNET™ Straight Cable
• Easy to Install
• 1-Year Warranty

CAB-GX20 GrowNET Patch Cable, 20ft by Agrowtek

Agrowtek standard GrowNET™ patch cable (RJ-45 / cat5e) for connecting GrowNET™ devices. UTP 30AWG flat cables are available in various lengths.

• GrowNET™ Straight Cable
• Easy to Install
• 1-Year Warranty

CAB-GX50 GrowNET Patch Cable, 50ft by Agrowtek

Agrowtek standard GrowNET™ patch cable (RJ-45 / cat5e) for connecting GrowNET™ devices. UTP 30AWG flat cables are available in various lengths.

• GrowNET™ Straight Cable
• Easy to Install
• 1-Year Warranty

CAB-GXO GrowNET Cross-Over Kit by Agrowtek

A GrowNET cross-over adapter is required when connecting Agrowtek's intelligent sensors and relays in a mini-control system. The cross-over kit (included with mini-control system kits) has a 6" pigtail cable and cross-over adapter for use with standard GrowNET (cat5e) cables.

• GrowNET™ Cross-Over
• Easy to Install
• 1-Year Warranty