All Products

SP1000 Smart Ambient CO2 Meter by Test Products International

• Measure ambient CO2 levels in work & office spaces as well as Commercial Kitchens
• Monitor results of air control systems
• Communicate with Android & iOS Smart Phone using Bluetooth LE and TPI App
• Combine with other TPI Smart Device to View and Record other parameters simultaneously such as Ambient CO & Ambient Temperature readings (DC710 and/or SP341 required)
• Low cost and lightweight, less than 100 grams
• Magnet on back for hands free viewing

Applications

• Commercial Kitchen Environments
• Office & work space CO2 build-ups

SP323 Smart Superheat Temperature Probe, -40 to 185F, +/-2.5 F by Test Products International

The TPI SP323 Smart Temperature Clamp Probe is used to measure temperature on refrigeration systems. It connects to a smart device using the TPI View App.

It sends live measurement data and can be used in conjunction with the SP670 Smart Pressure Probe to calculate Superheat and Subcooling using the App.

The SP323 is also capable of logging temperature measurements over time to help identify intermittent problems.

• Temperature Range: -40 to +185°F (-40 to +85°C)
• Clamp Range: 1/4 inch to 1 1/2 inch (6mm to 38mm)
• Connect to Smart Device and use with the TPI View App
• Temperature measurement on air conditioning, heating, and refrigeration systems
• View "LIVE" Temperature Readings and instantly save, e-mail and/or print
• Save, e-mail and/or Print "Differential" Temperature readings with one or two SP323 probes
• Perform, save, e-mail and/or print differential temperature readings such as Radiator Balancing or Flow & Return on Boilers or Heat Pumps
• Remote Data Logging Function with multiple instruments logging at the same time
• Store ALL GPS tagged Test Results within the TPI View Job Management
• Use in conjunction with the SP670 High Pressure Smart Probe to perform Superheat and Subcooling measurements

SP341 Smart Single Temperature Meter, -58 to 2462 F by Test Products International

K-Type single input thermometer with industry standard sub-mini connector. Use with TPI Smart Probe App to display temperature on a smart phone. Measure T1, T2 and calculate T1-T2 using a single SP341 or two SP341's at the same time.

Features/Benefits:

• Auto Field Calibrate in less than 10 seconds in ice water to achieve +/- 1°F system (tester & probe) accuracy within 30°F to 120°F temperature range
• Measure temperature and calculate T1-T2
• Communicate with smart phone using Bluetooth LE and TPI App
• Heavy-duty magnet on back for hands-free use
• Record minimum, maximum & average
• Display readings in °F or °C

Applications:

HVAC/R

• Ambient Air, Thermostats, Registers, Vents
• Compressor Heads
• Temperature Differential

FOOD

• Grill & Surface Temperatures

ELECTRICAL

• Cables, Connections
• Circuit Breakers, Motors & Transformers

Range:

• -58°F to 2462°F (-50°C to 1350°C)

SP341C1 SP341 Smart Single Temperature Meter with Pouch and FK13M Probe, -40 to 1562 F by Test Products International

K-Type single input thermometer with industry standard sub-mini connector. Use with TPI Smart Probe App to display temperature on a smart phone. Measure T1, T2 and calculate T1-T2 using a single SP341 or two SP341's at the same time.

Features/Benefits:

• Auto Field Calibrate in less than 10 seconds in ice water to achieve +/- 1°F system (tester & probe) accuracy within 30°F to 120°F temperature range
• Measure temperature and calculate T1-T2
• Communicate with smart phone using Bluetooth LE and TPI App
• Heavy-duty magnet on back for hands-free use
• Record minimum, maximum & average
• Display readings in °F or °C

Applications:

HVAC/R

• Ambient Air, Thermostats, Registers, Vents
• Compressor Heads
• Temperature Differential

FOOD

• Grill & Surface Temperatures

ELECTRICAL

• Cables, Connections
• Circuit Breakers, Motors & Transformers

Range:

• -58°F to 2462°F (-50°C to 1350°C)

SP341C2 SP341 Smart Single Temperature Meter with Pouch and GK13M Probe, -58 to 2462 F by Test Products International

K-Type single input thermometer with industry standard sub-mini connector. Use with TPI Smart Probe App to display temperature on a smart phone. Measure T1, T2 and calculate T1-T2 using a single SP341 or two SP341's at the same time.

Features/Benefits:

• Auto Field Calibrate in less than 10 seconds in ice water to achieve +/- 1°F system (tester & probe) accuracy within 30°F to 120°F temperature range
• Measure temperature and calculate T1-T2
• Communicate with smart phone using Bluetooth LE and TPI App
• Heavy-duty magnet on back for hands-free use
• Record minimum, maximum & average
• Display readings in °F or °C

Applications:

HVAC/R

• Ambient Air, Thermostats, Registers, Vents
• Compressor Heads
• Temperature Differential

FOOD

• Grill & Surface Temperatures

ELECTRICAL

• Cables, Connections
• Circuit Breakers, Motors & Transformers

Range:

• -58°F to 2462°F (-50°C to 1350°C)

SP555 Smart Vane Anemometer by Test Products International

The SP555 is a vane velocity Smart Probe. It measures air velocity and temperature; calculates CFM (Volume); connects to mobile device and uses the TPI View App. Perform average air velocity and air volume tests. 3 Year Limited Warranty.

Feature:

• Measure air velocity and temperature simultaneously
• Communicate with smartphone using Bluetooth LE and TPI View App
• Record minimum, maximum & average readings
• Multiple measuring units: m/s, km/h, ft/min, knots, mile/h
• Automatically calculates and displays CFM through the View app

Applications:

• Air velocity measurements in HVAC systems
• Air duct analysis to balance commercial and residential HVAC systems
• Fume hoods
• Floor registers
• Exhaust grills

SP565 Smart Hot Wire Anemometer by Test Products International

Hotwire air velocity probe with flip up telescopic sensor wand. Use with TPI Smart Probe App to display air velocity and air flow.

Feature/Benefits:

• Measure air velocity and temperature simultaneously
• Communicate with Android Smart Phone using Bluetooth LE and TPI App
• Record minimum, maximum & average
• Multiple measuring units: m/s, km/h, ft/min, knots, mile/h

Applications:

• Air velocity measurements in HVAC systems
• Air duct analysis to balance commercial and residential HVAC systems
• Fume hoods
• Floor registers
• Exhaust grills

Ranges:

• Air Velocity: 40 to 3900 fpm; 0.2 to 20 m/s
• Temperature: -5°F to 175°F (-20°C to 80°C)

SP597 Smart Temperature/Humidity Probe by Test Products International

The TPI SP597 Smart Humidity / Temperature Probe is used to measure humidity and temperature in heating and cooling systems, ambient air, and in ducts.

It connects to a smart device using the TPI View app. It sends live measurement data and can be used to calculate Enthalpy, Wet Bulb, and Dewpoint using the App.

The SP597 is also capable of logging temperature measurements over time to help identify intermittent problems.

• Humidity Range: 0 to 100% RH
• Temperature Range: -4 to +140 °F (-20 to +60 °C)
• Probe rotates for storage / use
• Depth adjustable probe magnet for attachment to ducts
• Connect to Smart Device and use with the TPI View App
• View "LIVE" Temperature & Humidity Readings
• Save, e-mail and/or Print Temperature & Humidity readings rooms & ducts
• Ideal for checking air conditioning system humidifiers
• Remote Data Logging Function with Multiple instruments logging at the same time
• Store ALL GPS tagged Test Results within the TPI View Job Management
• Use to calculate Wet bulb, Dewpoint, and Enthalpy

SP620 Smart Pressure Meter by Test Products International

Dual input manometer with +/- 60 inH2O input range. Use with TPI Smart Probe App to display pressure. Seven units of measure include inH2O, PSI, inHg, mbar, kPa, mmHg, and mmH2O. One touch zero function and Trim mode to stabilize fast changing pressures.

Features:

• 0.01 inH2O resolution
• High accuracy +/-0.02 inH2O less than 1 inH20; 1.5% above 1 inH20
• Temperature compensated
• Trim mode to stabilize fluctuating readings
• Seven units of measure

Applications:

• Test duct pressure and perform static pressure checks
• Adjust appliance regulators
• Test pressure switch on a 2-stage gas furnace in both positive and negative pressures.
• Setting delivery pressures
• Leakage "shut-in" tests
• Regulator adjustments for pressure and lock-up tests
• Check air filters by measuring pressure drop

SP620C1 SP620 Differential Manometer with Pouch and A774 Tubing by Test Products International

Dual input manometer with +/- 60 inH2O input range. Use with TPI Smart Probe App to display pressure. Seven units of measure include inH2O, PSI, inHg, mbar, kPa, mmHg, and mmH2O. One touch zero function and Trim mode to stabilize fast changing pressures.

Features:

• 0.01 inH2O resolution
• High accuracy +/-0.02 inH2O less than 1 inH20; 1.5% above 1 inH20
• Temperature compensated
• Trim mode to stabilize fluctuating readings
• Seven units of measure

Applications:

• Test duct pressure and perform static pressure checks
• Adjust appliance regulators
• Test pressure switch on a 2-stage gas furnace in both positive and negative pressures.
• Setting delivery pressures
• Leakage "shut-in" tests
• Regulator adjustments for pressure and lock-up tests
• Check air filters by measuring pressure drop

SP670 Smart Pressure with Schrader Valve Depressor by Test Products International

The TPI SP670 Smart Pressure Probe is used to measure pressure on refrigeration systems. It connects to a smart device using the TPI View App.

It sends live measurement data and can be used in conjunction with the SP323 Smart Temperature Clamp Probe to calculate Superheat and Subcooling using the App. The angled ¼´fitting allows access to service ports in close spaces.

The SP670 Schrader Valve Depressor is adjustable for use with worn valves in test ports. It can be serviced as well to extend the life of the probe.

Features:

• TPI SP670 Smart Pressure ProbeTPI SP670 Smart Pressure Probe
• Pressure Range: -14.7 psi to 870 psi (-1 bar to 60 bar)
• Connection Type: 7/16"-20 UNF /1/4" SAE angled for connections in tight spaces
• Over pressure protected to 1000 psi
• Adjustable Schrader valve depressor for use on worn valves
• Replaceable Schrader valve depressor
• View "LIVE" High Pressure readings
• Save, e-mail and/or print pressure readings with GPS tagged date & time on report
• Ideal for checking for compressor leaks
• Store ALL GPS tagged Test Results within the TPI View Job Management
• Use in conjunction with the SP323 Temperature Clamp Smart Probe to perform Superheat and Subcooling measurements

SP700 Carbon Monoxide Meter by Test Products International

Features/Benefits:

• Carbon Monoxide Meter
• Use with smart device and TPI smart probe app
• Measure 0 to 999ppm CO
• Conduct Tests of CO Levels In Ambient Air
• Confirm Proper Operation of Alarming CO Detectors in Households
• Check For Proper Installation of Ventless Gas Fireplaces, Furnaces, and Other Combustion Devices
• Low Battery Indicator. (Red LED flashing on.)
• Battery type and Bluetooth 4.2 are last two bullets.