All Products

379 Forehead Thermometer by Test Products International

The TPI 379 Forehead Thermometer uses infrared technology to measure forehead temperatures without the need for direct physical contact. Non-contact infrared technology allows the user to quickly and accurately screen people for temperature change while reducing the chance of spreading disease.

• Color-coded back light (green - yellow - red) based on measured temperature
• No touch. Measurement distance: 0.4 to 1.6" (1 to 4cm)
• Surface temperature mode range: 32.0°F to 212°F (0°C to 100°C)
• Fast, one-second sample time
• Memory stores up to 50 readings
• 3 Year Limited Warranty

381B Combination Non-Contact / Contact Thermometer with Circle Laser, -4 to 572 F, 9:1 distance to spot ratio by Test Products International

Measure hard-to-reach, sensitive, or large moving target areas.

• Repeatable, 0.1° resolution readings ensure tests are consistently correct.
• Circle laser sighting; The circle laser approximates the measurement area.
• Temperature compensated for accurate readings.
• Don't have to hit a hold button holds last reading automatically.
• Easy-to-use one button operation you can't lock up chip by pressing multiple buttons at one time and therefore don't have to disconnect the battery to reboot the chip.
• °C and °F selectable
• 9 to 1 D:S

Features:

• Non-contact -4 to 572°F
• Contact -146 to 2,192°F depending upon optional temperature probe
• Temperature compensated
• Single button, last reading hold function, °F/°C switchable

Applications:

HVACR

• Compressor heads
• Vents
• Hot and cold areas in insulation
• Leaks around cooler or freezer doors
• Leaks around windows
• Steam traps
• Registers

Electrical

• Cables
• Circuit breakers
• Connections
• Machinery
• Motors
• Transformers

Food

• Grill & surface temperatures
• Holding cabinets
• Serving temperatures
• Storage temperatures

505L Laser Sighting Digital Photo/Contact Tachometer by Test Products International

The 505L is a combination photo and contact tachometer that also measures surface speeds of belts and wheels.

Features

• Mutifunctions : Photo Tach & Contact Tach & Surface Speed
• Wide Measuring Range: 6 to 30,000 RPM
• Last Value, Max Value, Min Value: Automatically Saved and Recalled

505L Tech Tip

It's easy to test your 505L to make sure it is operating properly. First, point the 505L at the palm of your hand and press the on button. You should see light from the output lens. Second, point the 505L at a fluorescent light and press the on button. The reading should be 7200 RPM +/- 5 RPM.

Use Your 505L For These Applications

• Measure motor input and output shaft speed
• Determine conveyor belt speed
• Confirm fan, motor, and gear RPM
• Measure RPM of flywheels and pumps
• Monitor pulley rotation RPM and turbine speeds

605BT Digital Vacuum Guage (0 to 12,000 microns) with Blue-Tooth by Test Products International

Features:

• Single input with 12000 to 15 micron range.
• Seven units of measure (Microns, PSI, InHg, mBar, Pascals, Torr, mTorr)
• Display - 5 digit.
• Auto Off - Conserve battery power.
• Built in hanging hook and back magnets
• Over pressure protected to 300 psi
• Cleanable sensor

Applications:

• Verify vacuum before charging refrigerant system
• Prevents moisture and air from remaining in the system
• Finds small leaks

608BT Single input manometer, four units of measure with Blue-Tooth by Test Products International

Designed to assist contracting organisations during installation and swap-out of new generation smart gas meters in the 26 million homes and small businesses throughout England, Scotland & Wales by proving accurate results with "Time & Location" information for QA Support as well as Traceability and Completed Works Assurance.

• View LIVE pressure readings on the TPI Stream app
• Record Working & Standing Pressure Tests
• Colour coded "Outside Permissible Value" of +/- 2 mBar when recording Working Pressure at 21 mBar
• Perform & Record Let-By/Tightness Tests
• Colour coded "Outside Permissible Leakage Tolerances" of 0.25 mBar for Pipework Only Testing
• View Initial Test Value, Final Test Value & the Differential Value at the end of each test
• Serial No. visible in app & on reports
• Allocate a unique reference to each reading report
• Send reports to multiple e-mail recipients
• +/- 150 mBar range & 0.01 mBar resolution
• Hook & Magnets on the back of the manometer for hands free use while using the app
• Works on Android devices with Bluetooth Enabled TPI 608BT Models
• Support for Apple devices coming soon......
• Set up your company & engineer details
• Create jobs by reference or customer or address
• Save readings & reports against jobs created
• Reports will be Time & Location Stamped to prove When & Where readings were taken
• Instrument Serial No. visible in app & on reports
• Sign off jobs with customer signature and e-mail multiple reports to multiple e-mail addresses

608C3 608 Digital Manometer, 100 DMM, A901CP carrying case by Test Products International

Designed to assist contracting organisations during installation and swap-out of new generation smart gas meters in the 26 million homes and small businesses throughout England, Scotland & Wales by proving accurate results with "Time & Location" information for QA Support as well as Traceability and Completed Works Assurance.

• View LIVE pressure readings on the TPI Stream app
• Record Working & Standing Pressure Tests
• Colour coded "Outside Permissible Value" of +/- 2 mBar when recording Working Pressure at 21 mBar
• Perform & Record Let-By/Tightness Tests
• Colour coded "Outside Permissible Leakage Tolerances" of 0.25 mBar for Pipework Only Testing
• View Initial Test Value, Final Test Value & the Differential Value at the end of each test
• Serial No. visible in app & on reports
• Allocate a unique reference to each reading report
• Send reports to multiple e-mail recipients
• +/- 150 mBar range & 0.01 mBar resolution
• Hook & Magnets on the back of the manometer for hands free use while using the app
• Works on Android devices with Bluetooth Enabled TPI 608BT Models
• Support for Apple devices coming soon......
• Set up your company & engineer details
• Create jobs by reference or customer or address
• Save readings & reports against jobs created
• Reports will be Time & Location Stamped to prove When & Where readings were taken
• Instrument Serial No. visible in app & on reports
• Sign off jobs with customer signature and e-mail multiple reports to multiple e-mail addresses

623C3 623 Dual Input Differential Manometer Kit, Dual input, 0.001 resolution inH2O w/ A613, two A603, two A605, A908, and two A776 by Test Products International

The TPI 623 Dual Input Differential Manometer is a high accuracy hand held pressure meter with superior resolution.

The TPI 623 is a hand held pressure meter with superior resolution.

Features and Benefits

• 0.001 inH2O / kPa resolution up to +/-9.999 inH2O / kPa input
• Accuracy: ±0.02 inH2O (< 2 inH2O) ±1% (> 2 inH2O)
• Dual input differential
• Autoranging
• Seven selectable units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)
• Backlit Display

Applications

• Check for positive building pressure
• Perform room to room pressure diagnostics
• Test duct pressure and perform static pressure checks
• Adjust appliance regulators
• Test pressure switch operation on a 2-sage gas furnace in both positive and negative pressures

Standard Accessories (Included)

• 9V Alkaline battery (A009A)
• Soft Pouch (A600)
• Protective boot with magnets (A6XX)
• Silicone tubing with 1/4" barbed 1/8" NPT fitting (A603)

665L Dual Input Differential Manometer, Designed for Liquids, Dual input, 7 selectable units of measure, 1/4NPT fittings, data logging by Test Products International

Features

• Differential input with +/-100psi range.
• Can be used in non-corrosive liquid applications
• Seven units of measure (bar, kPa, PSI, mmHg, inHg, mH2O, inH2O).
• Data Logging - Record test data with time stamp and display with optional software.
• PC Communication: IR to USB Interface and PC Application software (optional p/n A665)
• Printing - Print test results directly to the optional A740 IR printer
• Display - 5 digit dual line with backlight
• Data Storage - Save up to 16 readings.
• Min / Max - Records Min/Max readings
• Auto Off - Conserve batteries.

709C7 709 Combustion Analyzer with A740, A773, 725L, CK13M (2ea) by Test Products International

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO₂ (nitrogen dioxide) and NOX (combination of NO and NO₂) to prevent cross sensitivity errors.

Use TPI analyzers to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O₂, and stack temperature.

Determine combustion efficiency, CO₂, and CO air free. Built-in differential manometer, combustible gas detection, PC communication, data logging, and can measure NO / NOX.

Features

Using TPI analyzers to determine combustion efficiency at the time of equipment set up minimizes call backs and can be used to verify to the home owner the value of service work by showing the increase in equipment efficiency after work is performed. Efficiency calculation can also be used to generate business by demonstrating the need to improve the efficiency of equipment or to show the benefit of purchasing new equipment with higher efficiency.

Quick And Simple Set Up

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selectionduring start up enable tests to be performed quickly without requiring extra set-up time after initial startup. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need toperform fuel selection every time the analyzer is turned on.

• High resolution 0.001 in H20 differential manometer for high efficiency and oil equipment
• Measure CO, and temperature
• Calculate CO2, efficiency, excess air, and CO air free
• Pump driven for fast response
• Will not shut off if 15 ppm CO is present for increased safety
• Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
• Optional A740 IR printer available for hard copies of test results
• Built-in differential thermometer
• Store function to save up to 50 readings
• Large easy to read backlit display

Applications

• Tuning of residential and furnaces and domestic boilers
• Ambient and stack testing for CO
• CO safety measurements in and around combustion sources
• Temperature checking, including superheat and hydronic differential temperatures
• Dual input differential manometer

725A Pen Style Combustible Gas Leak Detector by Test Products International

Trace fuel lines, tanks and containers for gas leaks. Once a leak is detected, the 725 will sound an alarm and the red LED's will light showing level of leak.

• 40ppm sensitivity
• Trace natural gas lines and fittings for leaks
• Check gas equipment for leaks
• Test propane tanks, fittings, lines, and heaters for leaks
• Check propane tanks, fitting lines, and heaters for leaks
• Test confined spaces for gas build-up
• Fits in shirt pocket
• Responds instantly

Applications

• Check gas generation for leaks

Standard Accessories

• Instruction Manual
• Battery and Sensor (Installed and Calibrated)

725L PEN Style Combustible Gas Leak Detector with Gooseneck by Test Products International

40 PPM methane sensitivity, detects combustible gases including: Methane, Butane, Propane, Gasoline, Diesel and Kerosene. Tick rate can be nullified to eliminate background gas concentration and pinpoint the leak source.

• 40ppm methane sensitivity and bearing defects
• Trace natural gas lines and fittings for leaks frame to failure
• Check gas equipment for leaks
• Test propane tanks, fittings, lines, and heaters for leaks
• Check propane tanks, fitting lines, and heaters for leaks
• Test confined spaces for gas build-up

777 Personal CO Monitor by Test Products International

Standard Features:

• One Button Operation
• Audible Alarm
• Visual Alarm
• Vibration Alarm
• STEL and TWA Alarms
• 2-Year Operation

Industries:

• Oil & Gas
• Fire Departments
• Industrial Workers
• Home Inspectors
• HVACR
• Residential Appliance Repair

Applications:

• Personal Safety
• Hazardous Gas Detection

777 Personal CO Monitor Kit with 777CUP, 777BGAS, A600 by Test Products International

Standard Features:

• One Button Operation
• Audible Alarm
• Visual Alarm
• Vibration Alarm
• STEL and TWA Alarms
• 2-Year Operation

Industries:

• Oil & Gas
• Fire Departments
• Industrial Workers
• Home Inspectors
• HVACR
• Residential Appliance Repair

Applications:

• Personal Safety
• Hazardous Gas Detection

780 Low CO Monitor by Test Products International

The TPI 780 is a low CO monitor of use in work and living spaces. It can be set on a flat surface or mounted to a wall using the included hardware.

• The 780 displays the real time CO concentration, peak CO concentration in a 24 hour period, and COHb%. It has visual and audible alarms.
• Unlike standard CO monitors that don't alert to low level carbon monoxide the 780 will display the level of CO from 0ppm and above and audibly and visually alert at 10ppm.
• Standard CO monitors designed to UL2034 don t alert until 70ppm is detected for up to 4 hours.

The 780 has an easy to read display with annunciators for low battery, real time ppm display, peak CO display, and COHb%.

Features

• LCD Display: Easy to read. Displays the real time, peak, and COHb% depending on display selection.
• Silence / Test Key: Press during normal operation to test the audible and visual alarms. Press during an alarm to silence the alarm for a specified period.
• CO Sensor Location: Area where CO is detected. Tabs enable the connection of the optional bump test gas cup. (Gas and cup sold separately)
• Display Key: Press to cycle through real time (ppm), peak (peak), and COHb% (COHb) displays.
• Alert LEDs: Power: Green LED flashes once per minute to indicate normal operation. Alarm: Red LED flashes once every 10 seconds in alarm condition. Fault: Yellow LED flashes, battery annunciator illuminates, and audible alert activates when the batteries are low. Yellow LED flashes and audible alert activates when the sensor is at the end of life or has a fault
• Audible Alarm Speaker: Location for loud 85dB piezo alarm speaker

780K1 Low CO Monitor with Calibraction Cup by Test Products International

The TPI 780 is a low CO monitor of use in work and living spaces. It can be set on a flat surface or mounted to a wall using the included hardware.

• The 780 displays the real time CO concentration, peak CO concentration in a 24 hour period, and COHb%. It has visual and audible alarms.
• Unlike standard CO monitors that don't alert to low level carbon monoxide the 780 will display the level of CO from 0ppm and above and audibly and visually alert at 10ppm.
• Standard CO monitors designed to UL2034 don t alert until 70ppm is detected for up to 4 hours.

The 780 has an easy to read display with annunciators for low battery, real time ppm display, peak CO display, and COHb%.

Features

• LCD Display: Easy to read. Displays the real time, peak, and COHb% depending on display selection.
• Silence / Test Key: Press during normal operation to test the audible and visual alarms. Press during an alarm to silence the alarm for a specified period.
• CO Sensor Location: Area where CO is detected. Tabs enable the connection of the optional bump test gas cup. (Gas and cup sold separately)
• Display Key: Press to cycle through real time (ppm), peak (peak), and COHb% (COHb) displays.
• Alert LEDs: Power: Green LED flashes once per minute to indicate normal operation. Alarm: Red LED flashes once every 10 seconds in alarm condition. Fault: Yellow LED flashes, battery annunciator illuminates, and audible alert activates when the batteries are low. Yellow LED flashes and audible alert activates when the sensor is at the end of life or has a fault
• Audible Alarm Speaker: Location for loud 85dB piezo alarm speaker

9050 Industrial Accountic Imager by Test Products International

The TPI 9050 UltraVision Industrial Acoustic Imager supports audible and ultrasonic frequencies.

The 9050 uses microphone array beam forming technology to acquire sound source distribution data, and collect video images in real time with a high-definition camera. By integrating the sound source distribution data with the video image, the changing sound source is dynamically presented on the display screen.

The UltraVision Industrial Acoustic Imager helps you quickly detect potential pressurized gas leaks and vacuum leaks in noisy industrial environments. Used in power systems, it can help you quickly identify potential partial discharge fault points.

The 9050 acoustical imager is made of an aluminum alloy shell, which is strong and durable and can adapt to the complex and changeable working environment.

The UltraVision is simple and convenient to operate and can be used to quickly find faults. Only two parameters need adjustment, the test frequency range and test dynamic range, to meet the vast majority of test requirements.

The 9050 supports camera mode, video mode, and data recording to provide job site is flexibility. The large capacity TF data memory card can be expanded, and test results can be exported and reported quickly.

Quickly and Visually Identify:

• Bad Rolling Element Bearings and Lubrication Problems.
• Electrical Panel and wiring connection issues.
• Air, Steam, Vacuum, and Gas Leaks with an immediate estimate of the annual cost of the leak.
• As easy to use as taking a picture
• Problem Areas – Visually Identified as One Views the Screen
• Minimal Training
• The Most Cost Effective Solution that Quickly and Accurately Identifies the Problem Source and Location

Applications

• Petrochemical Leak detection of process gases
• Natural Gas Detect natural gas and nitrogen leaks
• Metallurgical Industry Locate air, nitrogen, oxygen, and carbon dioxide leaks
• Power Generation Find steam, hydrogen, and ammonia leaks
• Partial Discharge Detection Test live circuits for partial discharge
• Automotive Detect sounds generated irregular vibration
• Electrical Detect abnormal circuit noise and vibration from components like capacitors, inductors, and transformers.