All Products

DK1218 Davit Mast, Includes Center Post, Elbow & 12"/18" Offset Arm (base and winch separate) by Pelsue

Pelsue offers a wide variety of Davit kits for our bases. These davits are man-rated to 350 lbs. and have a universal bracket for attachment of alternate lifting systems and/or 900 lbs maximum arresting force devices. This assembly provides locations for up to two device mounting plates. One standard Pelsue winch mounting plate is provided with the assembly. Available in assemblies and individual parts. Dimensions and specification given below.

DK1824 Davit Mast, Includes Center Post, Elbow & 18"/24" Offset Arm (base and winch separate) by Pelsue

Pelsue offers a wide variety of Davit kits for our bases. These davits are man-rated to 350 lbs. and have a universal bracket for attachment of alternate lifting systems and/or 900 lbs maximum arresting force devices. This assembly provides locations for up to two device mounting plates. One standard Pelsue winch mounting plate is provided with the assembly. Available in assemblies and individual parts. Dimensions and specification given below.

DK3036 Davit Mast, Includes Center Post, Elbow & 30"/36" Offset Arm (base and winch separate) by Pelsue

Pelsue offers a wide variety of Davit kits for our bases. These davits are man-rated to 350 lbs. and have a universal bracket for attachment of alternate lifting systems and/or 900 lbs maximum arresting force devices. This assembly provides locations for up to two device mounting plates. One standard Pelsue winch mounting plate is provided with the assembly. Available in assemblies and individual parts. Dimensions and specification given below.

DSP-C1 Flush Floor Mount Sleeve for Fresh Pour Concrete, Powder Coated Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Flush Floor Mounted

Placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern. Please contact Pelsue for specific installation requirements.

DSP-F1 Floor Mounted Baseplate/Sleeve, Powder Coated Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Floor Mounted

The floor mount is anchored by bolts, or it welds to a variety of surfaces such as floors, truck beds, catwalks, etc. Contact Pelsue for specific installation requirements.

DSP-F2 Floor Mounted Center Baseplate/Sleeve, Powder Coated Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Floor Mounted

The floor mount is anchored by bolts, or it welds to a variety of surfaces such as floors, truck beds, catwalks, etc. Contact Pelsue for specific installation requirements.

DSP-F3 Flush Floor Mount Sleeve for Existing Concrete, Powder Coated Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Flush Floor Mounted

Placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern. Please contact Pelsue for specific installation requirements.

DSS-C1 Flush Floor Mount Sleeve for Fresh Pour Concrete, Stainless Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Flush Floor Mounted

Placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern. Please contact Pelsue for specific installation requirements.

DSS-F1 Floor Mounted Baseplate/Sleeve, Stainless Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Floor Mounted

The floor mount is anchored by bolts, or it welds to a variety of surfaces such as floors, truck beds, catwalks, etc. Contact Pelsue for specific installation requirements.

DSS-F2 Floor Mounted Center Baseplate/Sleeve, Stainless Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Floor Mounted

The floor mount is anchored by bolts, or it welds to a variety of surfaces such as floors, truck beds, catwalks, etc. Contact Pelsue for specific installation requirements.

DSS-F3 Flush Floor Mount Sleeve for Existing Concrete, Stainless Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Flush Floor Mounted

Placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern. Please contact Pelsue for specific installation requirements.

DSS-W1 Wall Mounted Plate/Sleeve, Stainless Steel by Pelsue

The wall mount is anchored by bolts or welds to truck bumpers, tank walls, sides of catwalks, meter pits, clarifiers, etc. Please contact Pelsue for specific installation requirements.