All Products

Part Number: HR1231000PA

Part Number: HR123100PA

Part Number: HR123100PN

Part Number: HR12330PN

*Please note we can only ship RKI products to customers within the United States

I-0003 530 nm SAM Verification Kit by AquaPhoenix

The I-0003 Verification Kit for 530 nm Single Analyte Meters (SAMs) allows an analyst to quickly and routinely check the performance of the following photometers: Chlorine (I-2001), Dissolved Oxygen (I-2002), Chlorine Dioxide (I-2005), Ozone (DPD) (I-2019) and Peracetic Acid (I-2020).

Each SAM Verification kit is packaged in a compact, durable polypropylene carrying case and includes a set of ampoules containing various dye solutions specific to the wavelength of the particular photometer.

A spectrophotometer that is certified using NIST traceable optical standards has been used to verify that each ampoule in the kit performs within the established acceptance criteria. A Certificate of Conformance is supplied with each kit that reports the permissible test value for each standard in the kit.

I-1400 CTS Tester by AquaPhoenix

I-2017 Detergents (anionic surfactants, MBAS) SAM Kit, 0-2.50 ppm by AquaPhoenix

I-2023 LR Ozone SAM by AquaPhoenix

Shelf Life: The Vacu-vials kit included with this instrument has a shelf life of 8 months.

IR22-807 IR 22 Fixed Transmitter with Carbon dioxide (CO2) MK252-0, no display, 4-20 mA, 0 - 25% vol. Range by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO₂ or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

• Long service life of the infrared (NDIR) sensor
• Extremely stable, low maintenance
• Cost effective single-man adjustment
• Output 4-20 mA or RS485 Modbus

IR22-807-D IR 22 Fixed Transmitter with Carbon dioxide (CO2) MK252-0, with display, 4-20 mA, 0 - 25% vol. Range by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO₂ or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

• Long service life of the infrared (NDIR) sensor
• Extremely stable, low maintenance
• Cost effective single-man adjustment
• Output 4-20 mA or RS485 Modbus

IR22-807-M IR 22 Fixed Transmitter with Carbon dioxide (CO2) MK252-0, no display, Modbus, 0 - 25% vol. Range by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO₂ or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

• Long service life of the infrared (NDIR) sensor
• Extremely stable, low maintenance
• Cost effective single-man adjustment
• Output 4-20 mA or RS485 Modbus

IR400 Point IR Gas Detector by MSA

The IR400 Infrared (IR) Point Detector is a hydrocarbon gas detector that continuously monitors combustible gases and vapors within the lower explosive limit (LEL) and provides alarm indication. It features an industry-leading response time of less than 3 seconds, even with a splash guard installed. All electronics are contained within an explosion-proof housing so that the IR400's detector information can be processed locally. Configurations with analog output, Modbus and HART are also available.

• Industry-leading speed & response: T90 ≤ 3 seconds even with splash guard installed
• No routine calibration required reducing maintenance costs
• Industry standard 4-20 mA output provides remote alarm and fault indication
• Multiple communication outputs provide complete status and control capability in the control room
• Heated optics eliminate condensation
• Dirty optics indication discriminates between true fault and cleaning requirements
• Fast calibration times reduce amount of cal gas required which lowers maintenance time and costs

Applications

• Chemical plants
• Compressor stations
• Drilling and production platforms
• Fuel loading facilities
• Oil well logging
• LNG/LPG processing and storage facilities
• Refineries
• Wastewater treatment facilities

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States