All Products

2490409 Bacteria Tests: Hach Heterotrophic Aerobic Bacteria 9 pk by AquaPhoenix

BART biodetectors are excellent diagnostic tools to help identify the presence and activity of various bacteria. Sulfate Reducing Bacteria (SRB) are one of the most important agents in biofouling and can cause corrosion, clogging, fouling of the water, and increased hygiene risks.

• Simple yet effective method for monitoring the population size and/or activity of specific groups of bacteria
• Easy to use, requiring no elaborate or costly equipment and no specialized training
• Effective and affordable tests are easy to interpret and can be performed at room temperature in virtually any environment

*Please note we can only ship RKI products to customers within the United States

M-700004 Manning GM-JR Readout Module, feed-through configuration, stainless enclosure by Honeywell Analytics

This unique, practical gas monitor readout/alarm device offers a variety of configuration options for industrial refrigeration customers with their own computer control system, OEMs who want to incorporate gas sensing in their design and existing Honeywell Analytics customers who want remote indication other than at their main readout. It has an easily adjusted setpoint and relay output in either configuration, plus 4/20mA output in the "feed-through" design. With its own plug-in power supply, the GM-JR sensor combination provides an economical answer for local concentration level information and control capability.

The GM-JR standard configuration is a single, rugged, miniaturized board mounted inside the door of the enclosure, and a separate terminal board for the sensor and/or power cable connections. The 20-segment LED bar graph has a calibrated scale that is specified when ordered. Alarm trip adjustments are made easily at 5% increments. On power up or after momentary power loss, a one-minute power-up delay period allows the sensor to stabilize.

The unit continuously monitors the incoming 4/20 mA signal from the sensor. If the signal drops below 1.4 mA, the fault LED will illuminate and the alarm relay will trip. The alarm relay is always energized in its normal state, providing additional safety.

The GM-JR can be housed in its own 4" x 6" heavy-duty steel enclosure and operate as an "end of line" stand-alone readout/alarm unit or feed the sensor's 4/20 mA signal directly through to a PLC. It also can be mounted in the door of any sensor enclosure to incorporate both sensor and readout in the same 4" x 6" or 6" x 8" housing. Use #18/3 shielded cable (Belden #8770 or equal) for runs up to 1500' with most sensors.

Additional Features and Benefits:

• 20-segment calibrated bar graph
• Power-up delay
• Fail-safe design
• Easy trip setting
• Relay output is time delayed
• Downscale alarm configuration available for oxygen
• Rugged NEMA 1, gasketed steel enclosure
• Continuous fault monitoring
• Feed-through configuration allows remote readout capability while being powered from instrument cable (no remote power supply needed)

MX6-LJ030211 MX6 iBrid Multi-Gas Monitor, CH4,COSH,O2,LE,P,E by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

HA6141-T Hydrochloric Acid, 1.0N, 20L by AquaPhoenix

• Traceable to NIST
• Hydrochloric Acid Solution/UN1789

Specifications

• Packaging Type: Cube
• Size: 20.00 L
• Concentration: 1.0N

60" Shutter with Light Trap Capable Housing, Unassembled

ACR-20-C 2 Station, 3/4" PVC Coupon Rack with QR Coupon Holders, Inlet/Outlet Valves, PE Panel Mount, 5 GPM Flow Regulator by Quantrol

Corrosion coupon racks are used to monitor and evaluate the effectiveness of water treatment programs against corrosion in cooling towers as well as chilled and hot water systems. Our racks meet ASTM specifications and are hydrostatically tested prior to shipment. Choose from PVC or black iron in 2 or 4 station configurations.

3/4" Schedule 80 PVC

• Use with chilled or cooling water
• Rated at 120°F @ 125 PSI
• Quick release PVC coupon holders with screw and nut
• Mounted to Polyethylene Panel

3/4" Black Iron

• Use with hot, chilled or cooling water
• Rated at 300°F @ 185 PSI
• Threaded black iron/steel coupon holders with screw and nut
• Mounted to Polyethylene Panel

72-5200RK-06 Eagle Portable Monitor, LEL(ppm) / GeH4 by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

HP1003-G Hydrogen Peroxide, 3% v/v, 4L by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 4.00 L
• Concentration: 3% v/v

R62995 FPS-COM 5000 RP-TR, US-2013 by Draeger

In an emergency, there is no time for misunderstanding. That's why Draeger developed the FPS-COM 5000 communication unit for NFPA-certified SCBAs. Designed to connect seamlessly to the Draeger FPS® 7000 full-face masks, this proven communication unit ensures clear communication through either a tactical voice amplifier or a radio – even in extreme conditions.

Only your voice is heard

The Draeger FPS-COM 5000 allows you to communicate without interference, even in the noisiest environments. Digital noise-reduction technology eliminates breathing sounds, ambient noise, and acoustic feedback for crystal-clear communication. In addition, the earpiece fits closely to the ear using has a flexible gooseneck that easily adapts to different head sizes and shapes.

Dual side speakers for amplified sound toward the listener

Two speakers mounted on the sides of the Draeger FPS-COM 5000 point in the direction the wearer faces for more effective communication. Speakers are flush mounted to reduce snag hazard and improve balance.

Access to different communication radios

You can use the attached jack to connect the FPS-COM 5000 to more than 350 different radio sets via the external Draeger C-C440 push-to-talk button or the Draeger C-C550 remote speaker microphone. Or you can connect the FPS-COM 5000 directly to the radio and use the built-in push-to-talk button. The communication unit also offers Bluetooth connection to selected radios, including Motorola APX™.

High reliability, low costs

Forgot to turn off the FPS-COM 5000 after a shift? No problem. After a pre-alarm, the communication unit shuts off automatically if no breathing sounds are detected after ten minutes. This increases the battery life, lowers maintenance costs, and ensures that equipment is ready for use when it's needed.

Assembly without special tools

With Draeger's new click-lock system, the FPS-COM 5000 can be attached and removed in just a few steps. And because the FPS-COM 5000 is protected against ingress of water or humidity with an IP67 rating, there is no need to remove the unit for cleaning of the mask.

Option-2GF FS10 Electro-Optical Fire Detector with Card Controllerr, 2GF System: general finishing applications with process control and fire alarm signal relays by Honeywell Analytics

Our fire detection systems have been protecting electrostatic paint spray booths worldwide - with millions of booth operational hours and not a single fire loss.

Fire Sentry FS System 10™

A high-speed microprocessor based fire detection and process control system specially designed for liquid and powder coating applications, the Fire Sentry FS System 10™ quickly detects the presence of a flame, reacts by initiating a shutdown of the electrostatic finishing process in a matter of milliseconds; and effectively interrupts the fire before residues and wet paint films can ignite.

The Fire Sentry FS System 10 is the only system that provides a two-stage response: an ALERT for spray gun "fireball" type fires and if the fire continues, a FIRE ALARM is declared in 4-5 seconds.

The Fire Sentry FS System 10 is vastly superior to conventional detectors due to the electro-optical quantum infrared sensors array and the ability to accurately detect fires without false alarms. The FS System 10 is available in both wallmount controller and card controller configurations. (For additional information on card controller, consult the factory.)

The detector is mounted in an explosion-proof housing. The wall-mounted controller is a self-contained system mounted in a NEMA 12 enclosure with LCD display and LED status lights. Three 10-amp mechanical relays have been incorporated for shutting down the paint flow, electrostatics and conveyor. Event history and fire tech data are reported by the detector in real time and data, then stored in the controller's non-volatile memory. FirePic™ and SnapShot™ data can be downloaded from the RS-232 port of the controller from your PC. The controller may operate with one or two detectors.

Fire Sentry FS10-R Unitized

The Fire Sentry FS10-R Unitized is a multi-spectral infrared electro-optical flame detector designed specifically for liquid paint or powder spray booth applications. Based on the Fire Sentry FS System 10, the FS10-R Unitized flame detector meets the need for a stand-alone capability and complies with the NFPA 33 Standard. The WideBand IR™, NearBand IR, and Visible sensors combined with the advanced signal procession provide optimum performance. High spend fire response with optional factory sensitivity settings and alarm outputs provide the best, proven solution to fire detection for the Finishing Industry.

Features

• Multi-Spectral digital electro-optical infrared fire detector
• Meets requirements of NFPA 33
• Unique two-stage ALERT and FIRE ALARM response
• Immune to false alarms caused by arcs or corona discharges
• Built-in automatic "through the lens" self-test
• Not sensitive to background radiant energy sources such as paint heaters
• Not affected by absorbing smoke or paint solvent mist in liquid pant spray booths
• Sees through paint, powder or oil residue on detector's lens
• Digital communications with RS-485 interface
• FirePic™: retrieval of recorded pre-fire data
• SnapShot™: dynamic graphical display of what the detector sees

Applications (indoor use only)

• Liquid Paint Spray Lines
• Aerosol Filling
• Powder Coating Booths
• Curing Ovens

Operation

The Fire Sentry FS10-R Unitized detector is designed to operate with any approved fire alarm panel. Interface with fire alarm panel is accomplished using the detector's ALARM, ALERT and FAULT relays.

When power is applied, a self-test is automatically performed and the FAULT relay is energized to show that the detector has no faults. The front LED blinks every ten seconds to indicate normal operation.

In normal operation, the continuous spectral data stream of information from the sensor array is analyzed by the microprocessor. With two distinct relay outputs, the Fire Sentry FS10-R Unitized provides an ALERT output for spray gun "fireball" type fires, and if the fire continues a FIRE ALARM is declared in 4-5 seconds.

The detector stores all the pre-fire spectral data from the sensor array in non-volatile memory for retrieval and evaluation. The Fire Sentry FS10-R stores the last six FirePic™ events, each 8 seconds long; and 200 event histories with time and date stamp. The FirePic data can then be used to postulate the cause of the fire.

TPPR-V-0856 19" Rack 5U Controller includes HMI, PCBs, SD Card, Modbus Interface Board by Honeywell Analytics

Honeywell's Touchpoint Pro makes gas control system design, installation, configuration and operation simple. Touchpoint Pro uses a 'building block' approach, providing unrivalled flexibility. The building block approach employed by Touchpoint Pro delivers real value by being able to adapt to each unique system requirement. Ease of use and intuitive configuration ensures that installation, set-up and ongoing maintenance costs are reduced, providing a 'no compromise' solution designed to reduce the cost of on-site safety.

Flexible architecture

Touchpoint Pro has been designed to deliver flexibility, allowing the system to be freely configured to meet customers' varying needs. Touchpoint Pro's modularity means that any system topology can be built, including centralised, distributed I/Os, or a mix of both.

24/7 visibility of system status

Touchpoint Pro's central controller has a Webserver interface, which can be accessed when it is connected to a network, allowing users to remotely view status and event history, and acknowledge, reset or inhibit channels. This feature offers the possibility of system monitoring and data analysis from a remote location using multiple devices including tablets, smart phones and remote computers.

Simple installation and maintenance

Using a simple building block technique to create your system, Touchpoint Pro offers multiple features that simplifies installation, setup and ongoing maintenance. A key feature to this is the preloaded sensor catalogue, which contains a complete listing of all Honeywell Analytics' gas sensors, each with a full default configuration setting. A user can choose to configure input channel settings from the sensor catalogue, resulting in a quick and simple three step configuration process. The rest of the configuration will be loaded automatically.

Wide selection of inputs/outputs accepted

The Touchpoint Pro Input/Output plug-in modules can be combined up to a maximum of 16 input modules (64 channels) and 32 output modules (128 channels). Modules can be located in any Touchpoint Pro enclosure and power distribution is via the communication/power Rail. Touchpoint Pro accepts analogue, digital and relay modules making it one of the most flexible controllers available.

Intuitive user interface

The heart of the Touchpoint Pro is the central controller, which includes the user interface. The user interface features a full colour LCD touch screen, and provides engineers with an intuitive solution to system set-up and deployment. Easily accessible icons, supported by drop-down menus ensure that even the most complex of system configurations can be commissioned with efficiency.

Aside from ease of use, Touchpoint Pro's user interface also includes some valuable aspects that help engineers save time, whilst setting up and commissioning a system.

Features & Benefits

• Webserver ensures 24/7 system status visibility for constant safety
• Flexible system architecture to meet specific site needs
• Easily accessible system status that can be seen at a glance

Quick Specs

• Up to 64 channels of detection and 128 output channels
• Digital and analogue inputs available
• Mulitple mounting possibilities
• Touchscreen user interface