All Products

Part Number: U105310PM17

TVS Control, 3-Ventilation Stage by Schaefer

Our broad range of sensors and manual/automatic controls allow dairymen, greenhouse operators, plant managers and others to control fans and heaters and optimize thermal comfort in their facilities.

6600-8075 MGS-550 Safety Compliance Gas Detector - IP66, 5-digit LED (consentration level), Analog and (3) Relay Outputs, Modbus, (1) Factory Installed IP66 Sensing Head - Ethylene, 0-2,000 ppm, SC by Bacharach

Bacharach's MGS-550 leak detector combines electrochemical, semiconductor, catalytic bead and infrared sensors into one platform to support leak detection for the new low GWP (Global Warming Potential) refrigerant blends as well as natural refrigerants to enable gas leak detection in the often harsh environments of industrial refrigeration.

The MGS-550 can easily be integrated into any building management system (BMS). The Modbus RTU interface allows the user to program and configure the unit remotely through the BMS. Remote access gives complete control to the user when using Modbus. Alternatively, electrical current or volt analog output provides an industry standard reading using 4-20mA.

Having three integrated relays within each instrument reduces the need for having to wire alarm devices back to a central control system. Because of the integrated relays, the Bacharach MGS-550 can be operated as a stand-alone system. Each relay can be individually programmed to trigger alarm devices and actions separately or as a redundant system.

The straightforward menu structure is identical regardless of the type of sensors used, reducing the costs and amount of time for training required upon installation or during maintenance.

Bacharach's MGS-550 offers the flexibility of adding a second sensor at any point in time without the need for any additional controllers. Any sensor can be remotely mounted from the main instrument to a distance of 5 meters or 15 feet. It meets the requirements of EN 378 and ASHRAE 15.

Features

• One or two sensor capability
• Remote sensor capabilities
• Analog and digital interface
• On-board relays
• Magnetic wand
• Status indicator and LED display
• Optional MGS-408 Controller

Benefits

• Detects two gases and/or in two locations with one instrument
• Flexible placement in hard to reach areas
• Ease of integration with multiple control devices
• Connects to local alarm devices for saving costs on installation
• Non-intrusive configuration and calibration
• Provides at-a-glance status overview and comprehensive direct user interface
• Create an independent, centralised alarm system with up to 6 gas detectors

73-1203-20-CSA EC-600 Indoor Carbon Monoxide Monitor, 0-150 ppm, 24 VDC Operation with 20 Meter Sensor Cable, CSA Version by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

CS2000-B-FC Conductivity Standard, 2000 μS/cm, 60mL by AquaPhoenix

• Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 60 mL

08445-10 TC/PR28875-3 TC/PR28875-3 Type K 90°-Angle Surface Thermocouple Probe with Guarded Tip by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• These probes are designed to measure surface temperature without penetrating the surface
• Ideal for monitoring flat surfaces such as hot plates, furnaces, or molds
• Each probe comes with a PTFE guard to protect the junction and help keep the temperature reading isolated
• Response Time: 1 second or greater
• Each probe comes with a color coded ANSI coiled cable: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

365ASDD12 36" Aluminum Exhaust Fan in Slant Wall Housing, 5-Wing, 1 / 2 Hp, Direct Drive by Schaefer

Schaefer aluminum slant wall exhaust fans are built with heavy-duty, corrosion resistant aluminum for best-in-class durability and longevity. Using only high quality and energy efficient motors, they are designed for exceptional performance and maximum efficiency, and provide low maintenance and operating costs. The aluminum slant wall exhaust fans are the ideal solution for air exchange and cooling needs in greenhouse application that want an extremely durable fan that will last for many years. Ships fully assembled with shutters to be easily installed in field.

Features and Benefits:

• 5-wing aluminum blade with low solidity ratio for maximum efficiency and airflow and quiet operation
• Durable aluminum vertical uprights for reliable housing and motor support
• Aluminum shutter with reduced flapping for greater efficiency
• Totally enclosed, maintenance free and thermally protected motor for long life and ease of use
• Belt drive models come equipped with self-adjusting idler style belt tensioner for easy adjustment
• Pre-lubricated, permanently sealed ball bearings with optional remote bearing lubrication system for easy maintenance
• OSHA inlet and outlet guards available for additional safety
• Available in belt drive or direct drive
• Suitable for buildings with up to 6" wall thickness using standard rough-in dimensions
• Two year warranty
• Made in the USA

FFM525G112-3V 52" Fiberglass Belt Drive Exhaust Fan, 5-Wing Galvanized Blade, 1-1 / 2 Hp, 3-Phase, VFD Compatible by Schaefer

Schaefer fiberglass exhaust fans are designed and built to be highly efficient (high cfm/watt), long lived and competitively priced fans for agricultural and other applications. The fiberglass exhaust fans are used worldwide to exhaust high volumes of air from factories, warehouses, garages and other locations, where building owners value low capital cost and low operating cost. Fans ship fully assembled with aluminum inlet shutters, self-adjusting belt tensioner and powder coated outlet guard.

Features and Benefits:

• Totally enclosed, thermally protected motors for safety and long life
• Easy belt replacement, minimal maintenance required
• Remote Lubrication System optional
• Aluminum inlet shutter and powder coated outlet guard
• Suitable for buildings with up to 12" wall thickness
• Available in 36", 48" and 52" sizes
• 1-phase and 3-phase motors of various sizes
• 15 year housing warranty
• Two year warranty
• Made in the USA

523GP112-3-50-27-UA 52" Galvanized Panel Fan, 3-Wing, 1-1 / 2 Hp, 3-Phase, 50 Hz, Unassembled by Schaefer

Schaefer's galvanized steel panel fans combine low cost, high airflow and high air speeds for very high ROI livestock cooling. These fans are designed for agricultural livestock buildings requiring large volumes and velocities of air with a belt driven preference. Regardless of application, free stall barns, feed lines or holding pens, Schaefer offers a wide variety of galvanized panel fans to meet your specific needs. Ships fully assembled, complete with belt tensioner.

Features and Benefits

• Industry leading airflow and efficiency with airflows up to 40,000 cfm and efficiencies up to 40 cfm/watt
• Lab tested design for maximum performance and quiet operation
• Heavy gauge galvanized and powder coated steel components
• Thermally protected TEAO motors for long life
• Optional post and column mounts available
• Available in 24", 36", 48", 52" and 54" sizes
• 3-wing or 5-wing blade style
• Two year warranty
• Made in the USA

72-5200RK-03 Eagle Portable Monitor, HF / PH3, No Probe by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

pH2400 Extended Life Glass pH Electrode, DJ, Refill, BTDBNC by Sensorex

The pH2400 (bulb shape) and pH2500 (flat tip) electrodes are great for testing samples with unknown composition, such as wastewater. The double junction reference design prevents fouling by proteins, enzyme, and TRIS buffer.

Features:

• Maximum chemical compatibility with inert glass bodies
• Highly adaptable: Compatible with any meter accepting BNC
• Choose basic, advanced, or premium options based on your application
• Accurate and reliable measurements across full pH scale (0-14)
• Instantly ready for use: Extended shelf life (guaranteed for one year)
• One year limited warranty