All Products

VTS-M1432010301 Ventis MX4 Multi-Gas Monitor, CH4 (0-5%), CO, NO2, O2, Li-ion Extended Run Time Battery, Pump, Black, MSHA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

CS0084-Q Conductivity Standard, 84 μS/cm, 1L by AquaPhoenix

• Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 1.00 L

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

AB4150-Q Acetate Buffer Solution, pH 4.0, 1L by AquaPhoenix

• APHA for Chlorine, 4500-C, D

Specifications

• Packaging Type: Poly
• pH Value: 4.0
• Size: 1.00 L

GS-BD-B-071-G Gasman Single Gas Monitor, 0-100% LEL Ethanol (unfiltered), Non Rechargable Battery (single use), Dutch Safe Area only by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

VTS-M1432010101 Ventis MX4 Multi-Gas Monitor, CH4 (0-5%), CO, NO2, O2, Li-ion Extended Run Time Battery, Pump, Black, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

*Please note we can only ship RKI products to customers within the United States

1003-10C "Pistol Grip" Electric Deadman Remote Control Switch with 24' Coil Cord by Western Technology

The most advanced 2-WIRE SEALED ELECTRIC DEADMAN CONTROL on the market. Suitable for any electric remote control system, the 1003 Pistol Grip is designed specifically for fueling with ergonomic, trigger-activated pistol grip design for operator comfort and improved safety.

Features

• All polyurethane construction (rubber-like material)
• Sealed body
• Two-wire system
• Suitable for any electric deadman remote control system
• Advanced ergonomic, trigger-activated pistol grip design for operator comfort and improved safety
• Preferred by contractors worldwide for maximum safety and reliability in extremely harsh conditions
• Designed specifically for fueling
• NEMA 4 rated for wet or dry locations
• Built to order
• UL Listed switch
• Ideal for indoor or outdoor use
• Additional options include: coiled cord, Extreme Cable, sparkproof cable reels, made to order cable length, wireless configuration

G02-BK14-100 ToxiRAE Pro Personal Monitor, EC, CSA/UL, ETO-B (0.1-10 PPM), Datalogging, Wireless 900MHZ, Standard Accs by RAE Systems

The ToxiRAE Pro is the world's first wireless personal monitor for toxic gases and oxygen. The ToxiRAE Pro can detect a broad range of gases from carbon monoxide, hydrogen sulfide, and oxygen to ammonia, chlorine, and formaldehyde. The ToxiRAE Pro provides safety professionals wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response. The ToxiRAE Pro's intelligent interchangeable sensors store calibration data, which allows users to monitor for one gas one day and another gas the next, by simply swapping the sensors in the ToxiRAE Pro.

ToxiRAE Pro Comes with

• ToxiRAE Pro monitor with sensor as specified, alligator clip, protective rubber boot, and rechargeable battery installed
• Charging and PC communication cradle
• PC communication cable
• AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC)
• Calibration adapters
• Quick Start Guide
• CD with documentation
• ProRAE Studio II software for PC-based instrument configuration and data management
• Calibration card, quality certificate, and warranty/registration card

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Most electrochemical sensors are shared with MultiRAE family instruments
• Largest display in its class
• Continuous datalogging
• Easy to use
• Reliable, rugged, and intrinsically safe

Applications

• Agriculture
• Chemical
• Fire service / HazMat
• Food and beverage
• Oil and gas
• Pharmaceutical
• Pulp and paper
• Steel manufacturing
• Water and wastewater industries

DURA-LITE-12V- LED25SP 25W 12v AC / DC Par 38 LED Cool White, 25 Degrees Wet Location Gasket by Western Technology

Order your replacement PAR38 LED lamps (light bulbs) here! These Par38-25W LED light bulbs were specifically created for use with our SITE LIGHT™ Series. The optics give it narrower 25° beam angle giving it more of a spotlight projection. As a 12-24V AC/DC this custom bulb was built to work with the Battery Clamp plug option of the 4100LED & 4210LED. These 25W LED bulbs produce cool bright white light measured at ~2000 Lumens.

• 12-24V AC/DC: Cool White (Spot) 25° Beam Angle

FFM525G1 52" Fiberglass Belt Drive Exhaust Fan, 5-Wing Galvanized Blade, 1 Hp by Schaefer

Schaefer fiberglass exhaust fans are designed and built to be highly efficient (high cfm/watt), long lived and competitively priced fans for agricultural and other applications. The fiberglass exhaust fans are used worldwide to exhaust high volumes of air from factories, warehouses, garages and other locations, where building owners value low capital cost and low operating cost. Fans ship fully assembled with aluminum inlet shutters, self-adjusting belt tensioner and powder coated outlet guard.

Features and Benefits:

• Totally enclosed, thermally protected motors for safety and long life
• Easy belt replacement, minimal maintenance required
• Remote Lubrication System optional
• Aluminum inlet shutter and powder coated outlet guard
• Suitable for buildings with up to 12" wall thickness
• Available in 36", 48" and 52" sizes
• 1-phase and 3-phase motors of various sizes
• 15 year housing warranty
• Two year warranty
• Made in the USA

GS-BI-A-072-G Gasman Single Gas Monitor, 0-1500ppm Carbon Monoxide, Rechargable Battery, Italian Safe Area only by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

T815/T850 Battery-operated Crawler System, Manual Drum by Troglotech

Our new Crawler System is battery-powered, robust and all you need for successful surveys

robust, safe, zero emmisions, lightweight

• 300 metre Auto Drum 4" to 24" Centred - up to 39"/1000m
• Pan & Tilt with 'auto-home' to simplify operation
• complete system fully waterproof to IP67
• full days operation from supplied batteries
• Wifi Video Streaming to customer
• reversing camera
• 25kg inc crawler
• Inclinometer
• Powerful Sonde
• Lithium-Ion powered
• 4mm Kevlar cable
• 300m as standard
• steerable as standard
• locking wheel bolts
• cable auto-layering
• Elevator

The complete system is Lithium-Ion battery-operated using the latest technology for long mission times and this means that the system is lightweight and highly portable - and very economic to use. As usual with Troglotech products, the system is highly robust with the crawler being machined from solid brass and stainless steel.

With a range of quick-release wheel sets (the wheel bolts are locked into position for security) you can survey the full range of pipe sizes from 4" (100mm). The crawler is steerable and has a reversing camera and lights so that a survey can be performed in either direction.

The batteries on the crawler have a long mission time (up to a full days inpection work) are quick-release and can be charged on-site or via a mains supply.

safety first

Our systems are all battery operated so there are no dangerous voltages or generators required. We use the latest battery technology to provide a full days work from two crawler batteries and a single charge of the control unit battery.

why battery power?

On most crawler systems up to 90% of the power is lost in the main cable. The cable can be increased in size with more copper to reduce the loss - but then the crawler needs to be bigger and heavier. In addition the cable voltage is often at lethal levels.

We have produced a crawler that carries its own power source meaning that the main cable does not conduct any power allowing it to be much lighter. The composition of our cable is mainly Kevlar and the three small conductors only carry signals at safe voltages below 5V.

a complete automatic crawler system for 4" to 36"

our crawler system competes with hugely expensive mainline crawler systems for the price of a pushrod system

Troglotech's designers worked on the early, bulky crawler systems at Pearpoint from the 80's to the 00's. These were huge systems that required generators, cranes, custom-built vans and needed a team to operate. Troglotech decided that this was completely the wrong method to provide what is essentially a video camera for inspecting pipelines

To this end, Troglotech designed a crawler that carried its own power supply using in custom-designed Lithium-Ion batteries. This removed the need for the heavy support equipment.

• No need for generators
• No cranes needed
• No heavy main cable - we use a 4mm Kevlar cable - 300 metres weighs less than 10kg
• No need for multiple crawlers - our crawler is used from 4" to 36"
• No need for large power supplies, our batteries are quick-release and weigh 2kg
• No need for heavy cable drums, our is automatic and weighs around 15kg
• No need for a custom-made van, our system will fit in the trunk of a sedan - ready for 300m survey of 36"

S200RIT Reference, 12mm, Polymer, Calomel Free by Sensorex

Calomel Free pH electrodes!

The performance of a Calomel electrode is now available without the hazardous Mercury associated with the design. The "Calomel Free" design features an Ag/AgCl based double junction reference with a unique silver ion trap acting as a third junction to impede any silver ion contact with the sample. Reference output is adjusted to deliver the same output as a Calomel electrode using a silver chloride reference.

Glass or Plastic Body Electrodes!

Traditionally, pH electrodes have been made of all glass construction. However, today's thermoplastics are able to construct pH electrodes with durable and chemically resistant bodies to reduce any breakage. The protected design of the plastic body electrode extends over the measuring surface, making the pH glass bulb virtually unbreakable.

Sealed vs. Refillable Reference!

Both sealed and refillable styles are available. Sealed references are gel-filled and maintenance free while refillable designs extend electrode life by having a refillable reference electrolyte.

Features:

• Fast Response...No Silver Ion Contamination
• Use in Place of Calomel pH and Reference Electrodes
• Combination Triple Junction Design
• Uses No Hazardous Calomel Based Material (MERCURYFREE!)/RoHS compliant
• Sealed and Refillable Models
• Glass and Epoxy Body Models