All Products

1324-0405 IR-148 Infrared Gas Monitor, Four Point, CH2Cl2 (0-1000 ppm) by Honeywell Analytics

The Model IR-148 is an infrared gas monitor that detects toxic and combustible gases as well as solvents. It uses infrared sensing technology, allowing accurate measurement of target gas vapors with minimum interference from other vapors. The Model IR-148 is supplied as a wall mount unit configured for 1, 4 or 8 sampling points measuring down to 1 part per million (ppm). It has two available analog outputs, each which is software selectable between 10% and 100% of full scale: 4-20mA, isolated, current sourcing, and 0-10 VDC. Multiple gas calibrations are available.

Additional Features and Benefits:

• Infrared sensing technology
• Accurate measurement of target gas vapors with minimum interference
• Optional relay module can be configured for 1, 2 or 3 alarm levels
• 4-20mA

Quick Specs:

• Response: Updated reading every 7 seconds
• Operating temperature: 0-50°C, 32-122°F
• Relative humidity: 0-99% non-condensing (no effect on reading)

Part Number: G100525PA

BZ1-L7000R0901 Radius BZ1 Area Monitor, LEL (Methane), Cl2, PID, No Pump, INMETRO, English by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

MX6-M023Q214 MX6 iBrid Multi-Gas Monitor, CH4 (0-5%), H2S, O2, CO2 (IR), Lithium-ion Extended Range Battery, UL/CSA/ATEX/IECEx, Pump, German by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

*Please note we can only ship RKI products to customers within the United States

18525-16 Type K Spring Loaded Ind Thermocouple Probe Probe 12" L, 12" Ext .250 Dia, Grn Jct by Digi-Sense

These probes cannot be inserted directly into a medium. Spring loaded industrials are not sealed where the threads meet the probe. They must be inserted into a thermowell or other sealed vessel.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are spring loaded which allows the probe to be bottomed out into a thermowell
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

WD-17000-06 InnoCal NIST-Traceable Calibration; Thermistor Meter (Meter) by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

InnoCal's Metrology Laboratory is accredited to ISO/IEC Guide 25 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

08542-13 T24-1-507 Thermocouple, Wire, Type-T, 24-Gauge, FEP Insulation, 1000-ft Spool by Digi-Sense

Wire comes in 24-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.

S653/20/BTD S600 S600 Series Cable, CPVC, 20ft, BTD BNC by Sensorex

With threading for submersion mounting, the S653 Cable Assembly is the perfect complement to our S651CD Submersible Electrode series. This cable assembly is designed to submerge the electrode in tanks, flumes and sewer lines. The cost-effective CPVC construction is well suited for most water and wastewater applications. Pairing the S653 Cable Assembly with an S651CD series Electrodes allows for quick electrode changes, drastically reducing downtime due to maintenance.

• Use with one of our S651CD series Electrodes for quick and easy maintenance
• Threading design for fast and simple installation
• Durable CPVC design is suitable for most applications
• One year limited warranty

DB-2HD JL Wingert Bypass Feeder, 2 GAL Dome Bottom by Quantrol

The Carlon Wingert Bypass Feeders are designed to provide you with a rugged and dependable means of introducing treatment chemicals into hot and chilled water, or other liquid streams. Simplicity of design and ease of operation is inherent in every Wingert Bypass Feeder. With three styles to choose from, the J.L. Wingert Company offers the widest variety of feeders in the industry.

• 200 PSI (13.6 Bar) at 200° F (90° C) standard series has a 3 1/2" quarterturn positive seal closure and quick release cap
• Flat or dome bottom models available in 2, 5, 12 and 18 gallon capacities
• 300 PSI (20.7 Bar) at 200° F (90° C) high pressure series available in 1, 2, 5 & 12 gallon capacities
• Epoxy coating, stainless steel or ASME code construction available on select models
• Complete line of accessories available

18526-41 Type K Economic Bolt On Thermocouple Probe #8 Screw with Mini-Connector, 36" Fiberglass Ext. Grounded by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Available in #6 (M3.5) or #8 (M4) screw sizes and different lead lenghts
• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector or stripped leads: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

6506SBRS SolarShade Work Shelter - 6' W x 6' L x 6.5' H, with case by Pelsue

The Pelsue SolarShade® Work Shelter can be rapidly deployed, and creates instant shade. Three sides of the tent have full-size, roll-up mesh windows for maximum ventilation. The SolarShade® Series tents use a special solar blocking material, which prevents solar gain, so the tent stays cooler compared to the typical fabrics used in most other tents.

The SolarShade® Series tents are specially designed with a solar blocking material throughout the interior. The material helps blocks solar gain as well as unwanted light. This allows the tent to be deployed in hot weather environments, where the tent acts like a shade tree.

• Portable instant shade
• Blocks solar gain
• Sides roll up
• Solar blocking material on all surfaces
• Roll-up front door with double-sided zippers
• 3 mesh sides to allow for ventilation
• Removable fly for blocking late afternoon sun
• Roll-up front door and windows
• Tie-down cords for extra support
• 7 stakes and 4 ground loops
• Carrying case

VP5-L12YA000111 Ventis Pro5 Personal Gas Monitor, LEL (Methane), CO, H2S, O2 (Long Life), Li-ion Wi-fi Battery, Black, UL/CSA, LENS™ Wireless, English by Industrial Scientific

Detect up to five gases simultaneously with the rugged, wireless, Ventis® Pro5 Multi-Gas Monitor. With Ventis Pro5, safety goes beyond the gas detector whether you need team-based alarm sharing, remote monitoring with location details, or both. The monitor is also backed by a Guaranteed for Life™ warranty.

• Eliminate the need for two pieces of equipment by using Ventis Pro5 for personal monitoring and confined space entry.
• Train workers on one, multi-purpose gas monitor and reduce the risk and investment of having different devices in the field.
• Improve team and site safety by locally sharing alarms and gas readings between wirelessly connected Ventis Pro5 monitors.
• Get real-time location and alarm data directly from Ventis Pro5 gas monitors to a designated safety contact with the optional cellular or wi-fi battery pack.
• Reinforce safe behavior with programmable alarm action messages like "EVACUATE" or "VENTILATE" based on alarm level.
• Simplify the user experience with the ability to hide unnecessary screens based on user needs, role, industry, or site.

90250-00 Liquid-In-Glass Maximum/Minimum Thermometer; -35 to 50C (-30 to 120F), Organic Liquid Fill by Digi-Sense

Efficient thermometer measures both minimum and maximum temperatures in Fahrenheit and Celsius scales. Readings are accurate to ±1 scale division. Bulbs are enclosed in a sturdy plastic case suitable for outdoor or indoor use.

• For reference only (should not be calibrated)

MX6-L023Q215 MX6 iBrid Multi-Gas Monitor, LEL (Methane), H2S, O2, CO2 (IR), Lithium-ion Extended Range Battery, UL/CSA/ATEX/IECEx, Pump, Italian by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

74-7232-D-32 Airlink 7032 controller, 32 channels with 12-35 VDC power, 4 relays, Modbus out, 2.4 GHz radio by RKI Instruments

The RKI Instruments AirLink 7032 Controller is a hybrid touchscreen monitor that supports up to 32 wireless sensor inputs. Four channels can be setup for 4-20 mA wired input, making the controller compatible with both wireless and wired sensors. Durable, flexible and customizable, this controller can satisfy any wireless application.

Features

• 32 Channel hybrid touchscreen controller - supports wireless transmitters and up to 4 wired transmitters
• Radio options: 900 MHz radio or 2.4 GHz Standard
• 12 to 35 VDC operating voltage with optional AC power supply
• Operating temperature range of -20°C to +50°C
• 7 Inch full color touchscreen
• Adjustable background gas setting
• Programmable alarms
• Status indicator for fault conditions, Amber indicator for system faults
• Output options: Wet contact fault DC fault terminal, relay 4 can optionally be configured as a fault relay, RS-485 Modbus
• 2GB USB drive included for datalogging
• 1 Year limited hardware warranty
• NEMA-4X standard fiberglass enclosure with clear window

*Please note we can only ship RKI products to customers within the United States

90452-01 Precision Industrial PRT, 0.25" x 12", -60~160C, Spade by Digi-Sense

AM1610 Series - Precision industrial PRT/RTD probes: Conform to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Manufactured using a special aged and tested 5mm long sensing element to achieve the best performance in stability and repeatability. All have an accuracy of 35 mK at 0°C and short-term stability of 10 mK at 0°C. The AM1610 has a temperature range of -60 to 160°C (-76 to 320°F).