All Products

MVECXXXPA-XXX-XXX MicroVision ^EX Cooling Tower Controller, Toroidal Probe, Standard Panel, Conductivity Control, 3 Timers by Quantrol

MicroVision ^EX is a microprocessor-based conductivity, pH, and ORP controller, with the features and functions you need for accurate monitoring and control of cooling tower water that won't break your budget!

Features

• Toroidal conductivity sensor.
• One-point calibration.
• Large easy to read color display.
• Lockable front cover.
• Multiple level security codes.
• Up to 10 digital inputs.
• Optional 4-20 mA analog outputs and inputs.
• Dry contact alarm output.
• Battery backup.
• Optional Make-up conductivity control with a toroidal sensor.
• USB data logging is standard: Up to 2 years of data logging, Upload/Download program settings.
• Upgrades to the Operating System.
• Optional Ethernet interface.

Operating Benefits

• Easy installation.
• Easy programming based on MicroVision simplicity.
• Toroidal conductivity probe.
• No need to recalibrate conductivity probe.
• Reduced potential for fouling.
• Two year warranty.
• Wide control range: 0 - 9,999 μS/cm.
• Compact size saves space and reduces freight cost.

Controls

Bleed

• Solenoid valves, or motorized ball valves

pH and ORP Control

• Pumps, solenoid valves, or motorized ball valves

Up to 6 Selectable Timer Relays

• Limit timer
• Percent timer
• % post bleed with limit timer
• Water meter pulse timer
• Biocide control timer, with prebleed, lockout, and conductivity minimum
• 4-20mA input, pH, or ORP set point control
• Alarm output

Aftermarket

• Solenoids
• Motorized Ball Valves
• Water Meters
• Corrosion Coupon Racks
• Metering Pumps (PULSAtron, XP Series)

MX6-0163N213 MX6 iBrid Multi-Gas Monitor, CO,NH3,O2,CH4(IR),LE,P,S by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

363P12 36" Galvanized Panel Fan, 3-Wing, 1 / 2 Hp by Schaefer

Schaefer's galvanized steel panel fans combine low cost, high airflow and high air speeds for very high ROI livestock cooling. These fans are designed for agricultural livestock buildings requiring large volumes and velocities of air with a belt driven preference. Regardless of application, free stall barns, feed lines or holding pens, Schaefer offers a wide variety of galvanized panel fans to meet your specific needs. Ships fully assembled, complete with belt tensioner.

Features and Benefits

• Industry leading airflow and efficiency with airflows up to 40,000 cfm and efficiencies up to 40 cfm/watt
• Lab tested design for maximum performance and quiet operation
• Heavy gauge galvanized and powder coated steel components
• Thermally protected TEAO motors for long life
• Optional post and column mounts available
• Available in 24", 36", 48", 52" and 54" sizes
• 3-wing or 5-wing blade style
• Two year warranty
• Made in the USA

T4-ZOCA-IT T4 Personal Gas Monitor, 3 Gas - O2, CO, CH4 % LEL, Alternate Alarm Levels / Certifications by Crowcon

T4 integrates innovative safety features and an intuitive, rugged design to provide advanced protection for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H₂S), flammable gases and oxygen (O₂) depletion.

Features

• TWA resume function - unique to T4, this innovative feature ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
• 18 hour battery life - safely work multiple or longer shifts between charges, covered by the 18 hour battery life.
• Backlit display - large, clear display with backlight and option to flip the screen 180° for easy viewing while worn.
• Rugged design - with a thick anti-shock rubber casing and drop-tested to 13.1 feet on concrete, T4 provides dependable operation under the most demanding use.
• Water & dust-resistant to IP65 & IP67 - provides protection in the harshest environments.
• Dedicated sensors - one sensor for every gas ensures effective, fast and reliable detection.
• Positive safety indicator - a simple 'traffic light' status indicator which, at a glance, provides visual assurance of operational and compliance status to both users and supervisors. Green light - Working safely. Red light - Attention required
• Intrinsically safe - ATEX approved and UL Class 1 Div 1 for safe operation in a wide range of hazardous environments.
• Multiple alarms - audible 95dB alarm, bright red/blue LED's and vibrating alerts provide effective warning to gas hazards.
• Easy operation - large single button and intuitive menu system minimize training and allow easy operation while wearing gloves.

TX2-25012 Tango TX2 Dual Gas Monitor, H2S, SO2 by Industrial Scientific

• Protect workers, reduce false alarms, and spend less time managing your gas detector fleet with the Tango TX2.
• The Tango TX2 is the most accurate two-gas monitor featuring individual sensors that increase alarm accuracy.
• A two-year runtime and replaceable battery simplify gas detection management by eliminating the need for charging infrastructure.

4210LEDBAT75 Single Lamp Area Light with Magnetic Swivel Mount, LED Bulb, & 75' Electric Cable & Battery Clamps by Western Technology

As one of our 4000 series SITE LIGHTs, this portable light with a large handle and removable magnetic swivel mount comes standard with 25 ft of electric cable allowing for quick and sure placement. The 4210LED Mountable Work Light is the perfect choice for your temporary job site lighting needs.

Features

• Emitter Type: LED (PAR 38 LED Lamp)
• 2000 Lumens
• Brightness @ 48": 1970 LUX @ 41" Diameter
• Color Temperature: 5600K
• Power Consumption: ~25 Watts (PAR 38 LED Lamp)
• Voltage versatile: 12 to 24 Volts AC/DC or 115 Volts AC
• Durable polyurethane construction is naturally rust and corrosion resistant and is easily cleaned or decontaminated
• Length: 12"
• Width: 6 1/2"
• Height: 6 1/2"
• Weight: 8 1/4 lbs
• Portable light with large handle & removable magnetic swivel mount
• Quick & sure placement using 150 lb. pull industrial magnet
• Vibration/ impact resistant
• Remains cool to the touch during operation
• Uses Western Technology PAR 38 LED lamp
• Suitable for use in -25° to +120° ambient temperature
• Comes standard with 25 ft electric cable (longer lengths available upon request)

Part Number: 10L-349

*Please note we can only ship RKI products to customers within the United States

18109162-1121 Ventis Slide-on Pump, Lithium-ion battery pack, High Visibility Orange, ATEX/IECEx, English /French /Spanish /German /Chinese by Industrial Scientific

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis Pro5 Multi-Gas Monitors.

18109330-132 DSXi Cloud-Connected Docking Station for Tango TX1, 3 Inlet Ports, European Power Cord by Industrial Scientific

The DSX™ Docking station is an automated gas detector maintenance, record storage, and fleet management solution that flexes with the needs of your business. Choose from DSX-L Local Server, DSXi Cloud-connected, or DSX Standalone based on your data access requirements. All DSX Docking Stations offer automatic charging, bump testing, and calibration.

• Email alerts and notifications provide information on worker exposure, instrument usage, and instrument service needs
• Print bump test and calibration certificates for hot work and confined space entry
• Auto detect calibration gas type and expiration date upon cylinder connection
• Calibration gas status indicators provide warning to order replacement gas before a cylinder is empty
• DSX Standalone requires no PC or network connection
• DSXi Cloud-connected provides cloud-based record storage with automatic file back-up, fleet management, and automated maintenance and notifications through iNet Control
• DSX-L Local Server provides server-based record storage, fleet management, and automated maintenance and custom data reporting