All Products

76-ACM150-230-1G2 ACM150 FTIR-based Analyzer, 240VAC, primary venturi pump version by Honeywell Analytics

Detect more gases, in many cases at lower levels, with proof of response. Cut service time in half. Ensure uptime and reliable performance with ACM 150 by Honeywell Analytics.

Multi-Point gas detection for enhanced safety

ACM 150 brings you the latest FT-IR technology within a centralised gas monitoring system to offer you many advantages:

• Up to 40 measuring points can be centrally located to one device, such as process tools, gas and chemical storage units, gas cabinets, distribution boxes, emission measurement and ambient air monitoring.
• Up to 15 gases can be detected per measuring point, lowering your cost per gas per point monitoring.
• Self diagnostic programming detects faults and critical alarms, eliminating many maintenance calls.
• Communications options meet your unique site requirements (Lonworks®, ControlNet™, Modbus®, Profibus®)

Improved gas detection performance

The ACM 150 matches your company's increased productivity demands with a newly designed FT-IR bench that provides better LDL (Lower Detectable Limit) performance for many gases along with reduced maintenance and service requirements over the life of the instrument.

Choose the ACM 150 for enhanced safety, improved performance and lower cost per point monitoring.

Get in touch with Honeywell Analytics now

Find out how our systems integration team can save you money, and enhance safety and productivity at your company.

Integrate gas detection into a single unit

• Detect virtually any gas, chemical or odour in an industrial process
• Up to 40 measuring points can be detected sequentially
• 80 configurable relay points for increased flexibility

Cut monitoring costs over life of device

• Sealed aluminum body prevents moisture intrusion, protecting critical internal components
• Double IR scan ensures reliable performance, reduces false alarms
• Optimised built-in measuring/self diagnostics eliminate on-site gas calibration
• Desiccant replacement cycle of 3 to 5 years

Boost gas monitoring performance

• Composite sampling of up to 4 measuring points provides faster measurement
• Easy to service gas cell with stainless steel body construction prevents costly downtime
• Better SNR performance allows for lower LDL measurements

Simplified touchscreen operation

• Superfast processor improves response time
• Large user-friendly touchscreen interface
• Flexible communications options

S855/10/TL/TL S8000 ATC Cable, 10ft, TL/TL by Sensorex

The 855 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors. This cable assembly has 3/4" NPT thread for inline or submersion installations.

724-027 Eagle 2 Portable Monitor for LEL & PPM/O2/CO/PH3 by RKI Instruments

Continuing in its legacy of durable and reliable gas detection and monitoring systems, RKI Instruments is proud to offer a new product in its popular Eagle portable gas detector series. The Eagle 2 can monitor up to 6 different gases and is equipped with several exclusive features that can only be found with the Eagle series. In addition, its large glove friendly push buttons and LCD screen ensure an ease of use when onsite. Rated intrinsically safe, the Eagle 2 is equipped with state of the art technologies that are not available with other competitive gas detectors and monitors.

Specialty Sensors

The Eagle 2 has a variety of available specialty sensors. Workers can use a photoionization detector for low or high range VOC detection and Fence Electrode Technology for humidity and contamination resistance. An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC. Thermal conductivity sensors are available for % Volume H2 and % Volume CH4. The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3, CI2, HCN, PH3, and SO2. With the wide variety of sensors and gas detection available, the Eagle 2 can be customized to meet almost all worksite gas detection needs.

Exclusive Features

The monitor has a long internal pump that can draw samples for up to 125 feet. The pump features a low flow auto shut off and alarm. This allows operators to respond swiftly from a safe distance. The unit is multilingual with 5 different language preferences, and features an alkaline battery life of 18 hours or a NiMH life of 20 hours. To protect the integrity of the device and the configurations, the unit can be password protected. The Eagle 2 also has standard data logging capabilities for easy research, evaluation, and site monitoring. To reduce calibration costs and time, the unit features an automatic calibration option and a single gas calibration option.

The Eagle 2 is heavily protected from environmental conditions by a weather proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure. The enclosure also renders the unit water and dust resistant. Because of the enclosure, the Eagle 2 can function in 2 inches of water without leakage.

Eagle 2 Specifications

The portable and durable unit is lightweight at less than 4 pounds. Its dimensions are suitable for convenient carrying (9.5?L x 5.25?W x 5.875?H), and it features a conveniently placed durable top handle. The large easy to read display has a polyurethane overlay backlights on demand and when the alarm is activated. The 2 alarm channels are fully adjustable for the user and can be password protected. With a 95 dB buzzer and 4 high intensity LEDs, the alarm is sure not to be missed. The Eagle 2 is standard with a 2 year warranty for material and workmanship and a 1 year warranty for PID sensor.

*Please note we can only ship RKI products to customers within the United States

08541-18 J20-1-304 Thermocouple, Wire, Type-J, 20-Gauge, Glass Braid, 100-ft Spool by Digi-Sense

Wire comes in 20-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.

08009-21 ASTM Like Liquid-In-Glass Thermometer; 33C / Low Aniline Point, 50mm Immersion, -38 to 42C, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

MX6-R460Q211 MX6 iBrid Multi-Gas Monitor, PID, NO2, NH3, CO2 (IR), Lithium-ion Extended Range Battery, UL/CSA/ATEX/IECEx, Pump, English by Industrial Scientific

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific's best monitoring technologies—it's the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations, and a robust list of available configuration settings, the MX6 iBrid is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs).

As your work changes, so can your MX6 iBrid. It uses five sensor slots to detect up to six gases. Each of those sensor slots accepts a variety of sensors, which means you can use the instrument with a PID sensor one day and an infrared sensor the next. What's more, settings allow you to adapt the instrument's behavior for your application. If you need to use a benzene PID response factor for one application, and butadiene for others, the familiar menu structure will allow you to quickly change settings.

The rugged MX6 iBrid carries our Guaranteed for Life™ warranty and is compatible with DSX™ Docking Stations. With a DSX Docking Station, maintenance is simplified and data becomes more than a spreadsheet filled with logged readings. Proactively manage your gas detection fleet—track trends, know when instrument maintenance will be required, and understand how your MX6 iBrid instruments are being used.

• 24 "Plug-and-Play" field-replaceable sensors including PID and Infrared options
• Up to 6 gases monitored simultaneously
• Simple, user-friendly, customizable, menu-driven navigation
• Five-way navigation button
• Durable, concussion-proof overmold
• Optional integral sampling pump with strong 30.5 meter (100 feet) sample draw
• Full-color graphic LCD is highly visible in a variety of lighting conditions
• Powerful, 95 dB audible alarm

S3KAL2 ATEX/IECEx Approved Series 3000 MkII Toxic and Oxygen Transmitter, Aluminium LM25 and 2 x M20 Entries by Honeywell Analytics

Honeywell International is a company with a diverse array of technology and manufacturing products. With over 200 collective years of experience, Honeywell utilizes its specially trained team of scientists and engineers to design products and solutions for workplace safety and gas detection. Every Honeywell product utilizes advanced technology and Honeywell works vigorously to provide updates and upgrades to ensure that customers always have access to the most cutting edge technologies. The Series 3000 MKII represents this commitment to advanced technologies and workplace innovation.

Series 3000 MKII

The rugged and reliable Series 3000 MKII is applicable to a wide variety of worksite including oil and gas worksites, refineries, power plants, and other environments with potentially explosive atmospheres. Its proven electrochemical sensor technology ensures fast and reliable readings. The Series 3000 MKII is a replacement for the popular Series 3000 XPIS and provides some added features including 2 cable gland/conduit entries and more useable aluminum or stainless steel enclosures. The new unit is designed to detect toxic gases or oxygen hazards in potentially hazardous environments.

Reduce Costs for Installation and Maintenance

The Series 3000 MKII is able to save companies money by reducing installation and maintenance costs. With the universal mounting bracket included in a standard purchase, worksites can install the unit without assistant. Additionally, field wiring can run along with other instruments because the transmitter is explosion proof. Finally, the plug in style of the smart sensor eliminates the cost of wiring installation. As an added bonus, users can program the calibration frequency and utilize the fault diagnostic software to identify problems without needing to pay for a maintenance professional.

For convenience, the sensor interface is intrinsically safe. This allows it to be "hot swapped" without having to remove power to the gas detector. Additionally, the replacements for the stainless steel smart sensors are pre-calibrated allowing for an easy exchange. Each sensor is rated for over 2 years of life.

Specifications

The unit weighs approximately 3.75 pounds in the aluminum version and 8.16 pounds in the stainless steel version. Typical dimensions are 4.7" x 7.9" x 3.9". The unit is encased in a durable dust resistant and water resistant housing. The unit uses very little power and operates on an industry standard 2-wire, 4-20mAloop. For easy installation, the Series 3000 MKII comes standard with all necessary accessories and can be mounted on a wall or support pole using the provided universal bracket. The unit can also be installed electrically by using a conduit or cable with an appropriate mechanical protection.

The Series 3000 MKII is available with a variety of optional accessories for worksite customization. Optional accessories include a remote sensor mounting kit (which allows the sensor to be mounted up to 50 feet from the transmitter), a duct mounting kit, a pipe mounting bracket, a sunshade, a calibration cup to apply test gases, and a collecting cone.

T4-HOCA-S2 T4 Personal Gas Monitor, 4 Gas - H2S, O2, CO, CH4 % LEL, Alternate Alarm Levels / Certifications by Crowcon

T4 integrates innovative safety features and an intuitive, rugged design to provide advanced protection for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H₂S), flammable gases and oxygen (O₂) depletion.

Features

• TWA resume function - unique to T4, this innovative feature ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
• 18 hour battery life - safely work multiple or longer shifts between charges, covered by the 18 hour battery life.
• Backlit display - large, clear display with backlight and option to flip the screen 180° for easy viewing while worn.
• Rugged design - with a thick anti-shock rubber casing and drop-tested to 13.1 feet on concrete, T4 provides dependable operation under the most demanding use.
• Water & dust-resistant to IP65 & IP67 - provides protection in the harshest environments.
• Dedicated sensors - one sensor for every gas ensures effective, fast and reliable detection.
• Positive safety indicator - a simple 'traffic light' status indicator which, at a glance, provides visual assurance of operational and compliance status to both users and supervisors. Green light - Working safely. Red light - Attention required
• Intrinsically safe - ATEX approved and UL Class 1 Div 1 for safe operation in a wide range of hazardous environments.
• Multiple alarms - audible 95dB alarm, bright red/blue LED's and vibrating alerts provide effective warning to gas hazards.
• Easy operation - large single button and intuitive menu system minimize training and allow easy operation while wearing gloves.

WD-27003-04 Cole-Parmer® Self-cleaning pH Electrode, CPVC Housing, 1 k Ohms RTD by Oakton

• Flat surface prevents buildups, while fluid flow cleans surface for longer life
• Use with most meters and controllers - BNC connector and ATC element work with a variety of units
• Double junction for difficult applications

Part Number: P197150LM28

570-12W 12-Channel 570 Controller, Wall Mount by RKI Instruments

Features:

• Available to connect to various gas sensor
• Easy to read three color (green/orange/red) LED bar-graph display (52 segments)
• Combustible gases detectable in wide range (from PPM to %LEL) with one display unit (NC-581W)
• Automatically changes from ppm range to %LEL range (NC-581W)
• Two alarm levels
• Peak hold function
• Highly integrated compact design with plug-in type unit
• Zero suppression function
• Alarm contact interruption function (Maintenance mode)
• Alarm test mode
• Auto zero function
• Ability to indicate a flow failure alarm
• Output signal (4~20mADC) is provided

Applications:

• Petro-refinery, petrochemical plants
• Chemical plants
• Semi-conductor manufacturing plants
• Engineering public work field
• Power station, gas work
• Iron and steel works

*Please note we can only ship RKI products to customers within the United States

7100-300 TRI 300W Explosion-Proof Wide Area Floodlight with Tripod & 100' Electric Cable by Western Technology

The 7100 300WP Incandescent Explosion Proof Mounted Area light is one of the most versatile, powerful and rugged lights in it's compact size. With a 100 foot cable and plug plus swivel-mounted incandescent multi-directional wide area lighting, you can guarantee this compact light will light big projects!

Features

• Swivel-mounted incandescent multi-directional wide area light
• 100 foot 16/3 SOW electric cable & plug
• Complies with explosion proof/hazardous location requirements
• Additional options available

PF3W7 Digital Flow Switch for Water, 3-Color Display, Integrated Display by SMC

Series PF3W digital flow switch is perfect for applications requiring a constantly monitored flow of cooling or cleaning water. The PF3W series has been improved both in design and operating performance over the PF2W flow switch. Depending on the selected model, the PF3W is up to 40% smaller in volume, offering improved piping space and flexibility. Designed to work with fluids up to 90°C, these switches incorporate a built-in temperature sensor so both flow and fluid temperature can be effectively monitored at the same time. Further improvements include the addition of 2 screens, incorporating 3-color numerical displays which can also be rotated in both clockwise and counter-clockwise directions, thereby offering even better display visibility during operation. Available as non-grease type and with analogue output if required, the PF3W meets IP 65 enclosure protection standards and is both RoHS and CE compliant.

• Digital flow switch for water applications
• Integrated display type
• Flow rate range: 0.5-4(L/min) ~ 10-100(L/min)
• 3-color, 2-screen display
• Port sizes: 3/8, 1/2, 3/4, 1

Product contains:

• 3-Color Digital Flow SWITCH for Water
• 20 (2 to 16 L/min)
• N (NPT)
• 04 (1/2)
• F (OUT1: PNP; OUT2: Analog 4 to 20 mA)
• T (Temperature Sensor)
• Lead Wire w/M8 Connector, 3m
• F (Instantaneous Flow Rate: Gal/min; Accumulated Flow: Gal: Temp: °F)

72-5279RK Eagle Portable Monitor for CH4 % LEL/% volume (IR) Autoranging)/NH3 by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States