All Products

Panel Fan Post Mount All Sizes BD & DD with Hardware

Pad Set for 28" Pro-Kool (3 Pads 8" X 12" X 36")

VK20-3 20" Versa-Kool Circulation Fan, Mount, 3-Phase by Schaefer

Reduce heat stress and improve air quality with Schaefer's uniquely designed circulation fans. Unrivaled in the market, these fans are engineered to produce greater air movement and superior cooling no matter the application. You don't hear them. You don't see them. You only feel them!

Also known as Horizontal Air Flow (HAF) fans, these fans move air in a coherent horizontal pattern creating a gentle 'racetrack' air flow pattern needed in greenhouses to maximize heat distribution and humidity control by mixing the air, from ceiling to floor.

Features and Benefits

• Deep guard design for unmatched performance, low noise levels and safety without sacrificing airflow
• Matched high quality motors and blades for maximum efficiency
• Powder coated steel guards for increased durability and corrosion resistance
• Hot dipped galvanized guards on VK12-GA and VK20-GA models for even greater rust protection
• Powder coated steel mounting bracket and power cord included
• Wide variety of mounting options available for flexible and easy installation
• Variable speed controls available
• Misting kits available for even greater cooling
• Two year warranty
• Made in the USA

VK20-CK-B 20" Cattle Kooler Circulation Fan, Cord, Special Mount, Black by Schaefer

Reduce heat stress and improve air quality with Schaefer's uniquely designed circulation fans. Unrivaled in the market, these fans are engineered to produce greater air movement and superior cooling no matter the application. You don't hear them. You don't see them. You only feel them!

Also known as Horizontal Air Flow (HAF) fans, these fans move air in a coherent horizontal pattern creating a gentle 'racetrack' air flow pattern needed in greenhouses to maximize heat distribution and humidity control by mixing the air, from ceiling to floor.

Features and Benefits

• Deep guard design for unmatched performance, low noise levels and safety without sacrificing airflow
• Matched high quality motors and blades for maximum efficiency
• Powder coated steel guards for increased durability and corrosion resistance
• Hot dipped galvanized guards on VK12-GA and VK20-GA models for even greater rust protection
• Powder coated steel mounting bracket and power cord included
• Wide variety of mounting options available for flexible and easy installation
• Variable speed controls available
• Misting kits available for even greater cooling
• Two year warranty
• Made in the USA

WS-180 18" Aluminum Shutter by Schaefer

Schaefer aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features and Benefits:

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

WS-360 36" Aluminum Shutter by Schaefer

Schaefer aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features and Benefits:

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

WS-420E 42" Aluminum Shutter by Schaefer

42" Schaefer economy aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

WS-480E 48" Aluminum Shutter by Schaefer

48" Schaefer economy aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

SD-1GHR1234YF10 Detector head, 4-20 mA transmitter, SD-1GH, 0-10000 ppm R1234YF, SG-8521, AL 2000 ppm by RKI Instruments

RKI Instrument's model SD-1 Series smart combustible gas, toxic gas, oxygen, and organic vapor detector/transmitter is a robust and reliable explosion proof design for detecting LEL and ppm levels of hazardous atmospheres. In addition to measuring the common %LEL levels of methane, hexane and isobutane, for example, the SD-1 Series also has the capability of measuring a wide variety of toxic organic compounds in a PPM range such as acrylonitrile, ethylene oxide, n-methyl pyrolidone, methylene chloride and many others. This gives the SD-1 Series a unique niche in RKI's gas detector line-up. The SD-1 has an ATEX/IECEX approval for the explosion class ExdIICT5 and has an IP-65/67 ingress protection rating.

The SD-1 has a 4-20mA signal output as well as relay contacts for interfacing with other control systems or monitoring facilities. All SD-1 types are also available with HART communication instead of 4-20mA relay. SIL2 is available for the IR, EC and OX types. In facilitating non-intrusive conditions in hazardous atmospheres, the SD-1 can be calibrated and it's menus navigated with magnetic switches and a magnetic key.

Features

• Wide range of detectable gases: % LEL Combustibles, catalytic; % LEL Combustibles, IR; H2S, CO, & O₂; PPM for acrylonitrile, hydrogen, ethylene oxide, n-methyl pyrolidone, methylene chloride, and many others
• Sensor types include: Catalytic, Galvanic Cell, MOS, IR, & Electrochemical
• Direct digital display of gas readings
• HART Communication protocol or 4-20 linear output
• Available with SIL2 approval (IR, EC, OX versions)
• Easy maintenance using a magnetic key
• Self-diagnosis by microprocessor
• Low power operation (Maximum: 3W)
• Explosion proof: ATEX, IECEx, ExdIICT5

Applications

• LNG Terminal
• Petrochemical/Chemical plants
• Power plant
• Utilities
• Iron and steel works

*Please note we can only ship RKI products to customers within the United States

DO6400TC/H DO Sensor, 0-300%, HDPE, 10K across anode, TC= by Sensorex

The DO6400 & 7400 series dissolved oxygen sensors feature a large capacity electrolyte holder, positive fit, easy to replace membrane and dependable galvanic cell technology for long term deployment. The body design ensures a good grip when wet. Ideal for Aquaculture and wastewater monitoring applications, these sensors require minimal maintenance. PTFE or High-Density Polyethylene (HDPE) membranes are available. 2 Replacement membranes, installation tool and electrolyte are included. Additional maintenance parts are in convenient kits (see ordering information). Sensors with mV output as well as built-in 4-20mA output in 0-100% and 0-200% saturation range are available. In addition, Modbus-485 output versions with 0-100% or 0-300% range are available.

Digital Communication for More Process Visibility:

• Modbus and 4-20 mA output options now available
• Con guration and calibration can be done using web based software

Easy to Install and Maintain

• Membranes can be replaced quickly
• Designed to have good grip even when sensor is wet

Long Lasting Life

• Proven and dependable galvanic cell technology with large solution capacity
• Replacement membranes, electrolyte, and installation tool are included

IS200CD-NO3 Combination Nitrate ISE Electrode, 6.5"(165mm) L x 0.48" 12mm OD), 30" (.76m) Fixed Cable, Black Epoxy Body by Sensorex

Sensorex offers a combination Ion Selective Electrodes (ISE's) for Fluoride (F-), Chloride (Cl-), Ammonium (NH4+), Postassium (K+) and Nitrate (NO3-) measurement. These covenient combination electrodes use just one electrode to measure ppm of ions.

All Sensorex ISE's are housed in rugged plastic bodies and offer a choice of fixed cable or detachable cable design.

Use these electrodes with your ISE meter, pH meter in mV mode or with any mV input device.

Sensorex ISE's require little to know cleaning and are maintenance free (no reference or ISE refill solution required).

Each electrode is shipped in a bottle with or without a storage solution and are ready for immediate use.

• Easy-to-use combination sensors
• ISE types available: Fluoride (F-), Chloride (Cl-), Ammonium
• (NH4+), Postassium (K+) and Nitrate (NO3-)
• Fixed cable or quick-disconnect cartridge
• Rugged epoxy body

SG201C/BNC pH Electrode, refillable single-junction, glass body by Sensorex

Whether you are a student measuring pH in a lab or a business owner monitoring plant or crop health, you need a pH probe that will consistently deliver accurate measurements. If you deal with a wide variety of chemicals or any aggressive substances, a glass pH probe like our SG201C/BNC is a safe choice due to the chemically inert properties of glass. This basic, single junction electrode has a refillable reference cell, allowing users to maintain measurement precision throughout instrument lifetime.

• Accurate measurements across full pH scale (0-14)
• Easily maximize measurement repeatability: refillable reference cell with liquid solution
• Maximum chemical compatibility: glass probe body is inert to most reactions
• Compatible with a variety of pH meters: use this probe with any pH meter accepting BNC
• Instantly ready for use: Shipped in storage bottle for long shelf life &ndashl guaranteed for one year
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

SPXCDUSNA2M Sensepoint XCD RTD Transmitter, Ammonia (NH3) 0-50 ppm, Stainless Steel Enclosure, Modbus by Honeywell Analytics

Sensepoint XCD RTD from Honeywell Analytics makes it easy on your maintenance team, time and budget when faced with the challenge of monitoring toxic gases in Class I, Div 2 areas.

You can mount the unit up to 100 feet from the transmitter to obtain maximum gas detection coverage in areas not easily accessible or where the sensor would not be visible, as in high-or low-level concealed areas, or detection outside the room being monitored. XCD RTD offers unrivaled flexibility and performance via its easily recognizable display (traffic light pattern) to convey safety status, communication and mounting options, and onboard diagnostics.

Get More Return on Investment from the Practical Advantages of XCD RTD. Sensepoint toxic and oxygen sensors detect a wide variety of industrial gases at common measuring ranges, adding flexibility to your gas monitoring program, reducing your parts procurement costs and expanding your safety net.

Remote gas monitoring has never been this easy and cost-effective. Mount the sensor as shown in the illustration and view gas safety status via the large tri-color display on the transmitter, up to 100 feet away from the sensor. The advantages of this remote monitoring system are added safety, and reduced time spent on maintenance. There's no need for your team to climb ladders or bring in specialized equipment to view gas concentration readings or to conduct a safety audit. What's more, the removable sensor design of Sensepoint XCD RTD cuts downtime and eliminates the need for specialized training.

Reduce Cost of Ownership Over Life of the Product

• Cut stocking and procurement costs with a common transmitter platform
• Reduce maintenance time and expense with non-intrusive, one-man operation
• Simplify maintenance with plug-in, removable sensor
• Reduce inspection and training time with tri-color 'traffic light' display conveying safety status at a glance
• Simplify set-up and configuration with non-intrusive magnetic switches

Gain Added Flexibility, Reliability and Performance

• Extend gas sensing element up to 100 feet (30 meters) from transmitter; mount in the most difficult to access areas
• Reduce likelihood of human error via on-board diagnostics and easy-to-read display
• Protect against dust/water ingress with IP66/67 rated stainless steel or aluminum enclosure
• Prevent false alarms with auto-inhibit during maintenance
• Select sink or source 4-20mA output; integral or remote configuration
• Full range of accessories and purchase options let you choose the remote monitoring system that's right for your application

SPXCDUSND2R Sensepoint XCD RTD Transmitter, Nitric Oxide (NO) 0-10 ppm, Stainless Steel Enclosure by Honeywell Analytics

Sensepoint XCD RTD from Honeywell Analytics makes it easy on your maintenance team, time and budget when faced with the challenge of monitoring toxic gases in Class I, Div 2 areas.

You can mount the unit up to 100 feet from the transmitter to obtain maximum gas detection coverage in areas not easily accessible or where the sensor would not be visible, as in high-or low-level concealed areas, or detection outside the room being monitored. XCD RTD offers unrivaled flexibility and performance via its easily recognizable display (traffic light pattern) to convey safety status, communication and mounting options, and onboard diagnostics.

Get More Return on Investment from the Practical Advantages of XCD RTD. Sensepoint toxic and oxygen sensors detect a wide variety of industrial gases at common measuring ranges, adding flexibility to your gas monitoring program, reducing your parts procurement costs and expanding your safety net.

Remote gas monitoring has never been this easy and cost-effective. Mount the sensor as shown in the illustration and view gas safety status via the large tri-color display on the transmitter, up to 100 feet away from the sensor. The advantages of this remote monitoring system are added safety, and reduced time spent on maintenance. There's no need for your team to climb ladders or bring in specialized equipment to view gas concentration readings or to conduct a safety audit. What's more, the removable sensor design of Sensepoint XCD RTD cuts downtime and eliminates the need for specialized training.

Reduce Cost of Ownership Over Life of the Product

• Cut stocking and procurement costs with a common transmitter platform
• Reduce maintenance time and expense with non-intrusive, one-man operation
• Simplify maintenance with plug-in, removable sensor
• Reduce inspection and training time with tri-color 'traffic light' display conveying safety status at a glance
• Simplify set-up and configuration with non-intrusive magnetic switches

Gain Added Flexibility, Reliability and Performance

• Extend gas sensing element up to 100 feet (30 meters) from transmitter; mount in the most difficult to access areas
• Reduce likelihood of human error via on-board diagnostics and easy-to-read display
• Protect against dust/water ingress with IP66/67 rated stainless steel or aluminum enclosure
• Prevent false alarms with auto-inhibit during maintenance
• Select sink or source 4-20mA output; integral or remote configuration
• Full range of accessories and purchase options let you choose the remote monitoring system that's right for your application

SPXCDUSNO2 Sensepoint XCD RTD Transmitter, Oxygen (O2) 0-25% v/v, Stainless Steel Enclosure by Honeywell Analytics

Sensepoint XCD RTD from Honeywell Analytics makes it easy on your maintenance team, time and budget when faced with the challenge of monitoring toxic gases in Class I, Div 2 areas.

You can mount the unit up to 100 feet from the transmitter to obtain maximum gas detection coverage in areas not easily accessible or where the sensor would not be visible, as in high-or low-level concealed areas, or detection outside the room being monitored. XCD RTD offers unrivaled flexibility and performance via its easily recognizable display (traffic light pattern) to convey safety status, communication and mounting options, and onboard diagnostics.

Get More Return on Investment from the Practical Advantages of XCD RTD. Sensepoint toxic and oxygen sensors detect a wide variety of industrial gases at common measuring ranges, adding flexibility to your gas monitoring program, reducing your parts procurement costs and expanding your safety net.

Remote gas monitoring has never been this easy and cost-effective. Mount the sensor as shown in the illustration and view gas safety status via the large tri-color display on the transmitter, up to 100 feet away from the sensor. The advantages of this remote monitoring system are added safety, and reduced time spent on maintenance. There's no need for your team to climb ladders or bring in specialized equipment to view gas concentration readings or to conduct a safety audit. What's more, the removable sensor design of Sensepoint XCD RTD cuts downtime and eliminates the need for specialized training.

Reduce Cost of Ownership Over Life of the Product

• Cut stocking and procurement costs with a common transmitter platform
• Reduce maintenance time and expense with non-intrusive, one-man operation
• Simplify maintenance with plug-in, removable sensor
• Reduce inspection and training time with tri-color 'traffic light' display conveying safety status at a glance
• Simplify set-up and configuration with non-intrusive magnetic switches

Gain Added Flexibility, Reliability and Performance

• Extend gas sensing element up to 100 feet (30 meters) from transmitter; mount in the most difficult to access areas
• Reduce likelihood of human error via on-board diagnostics and easy-to-read display
• Protect against dust/water ingress with IP66/67 rated stainless steel or aluminum enclosure
• Prevent false alarms with auto-inhibit during maintenance
• Select sink or source 4-20mA output; integral or remote configuration
• Full range of accessories and purchase options let you choose the remote monitoring system that's right for your application

SS4-A2-CSS-E-H Multi-Spectrum Electro-Optical Digital Fire & Flame Detector, Stainless Steel UV/IR, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, IECEx for Zone 1 (2) M25 with SS4-FSCHCOM SS4 Module HART by Honeywell Analytics

The Fire Sentry SS4 Electro-Optical Digital Fire and Flame Detectors represent leading edge UV and UV/IR technology.

Fire Sentry SS4-A

The Fire Sentry SS4-A represents the world's pre-eminent UV/IR technology for ElectroOptical Flame Detectors with tens of thousands successfully operating in a multitude of installations worldwide. This multi-spectrum detector senses radiant energy in the ultraviolet (UV), visible and wide band Infrared™ (IR) spectrum. The radiant energy from all types of flaming fires will alert the detector to their presence.

To eliminate common nuisance false alarms that occasionally occur with UV-only, IR-only, Dual IR or Dual Mode UV/IR detectors, the Fire Sentry SS4 detectors' FireLogic signal processing requires that UV, visible and wide band IR radiant energy all be evaluated before declaring a fire. The smart detector utilises real-time signal processing algorithms that are optimised to alarm on all types of fires, while virtually eliminating the possibility of false alarms.

Fire Sentry SS4-AS

The Fire Sentry SS4-AS processes UV, IR and Visible (VIS) spectral ranges from ruggedised solar-blind UV, "Quantum-Effect" IR and VIS sensors correspondingly. It is optimised for detection of hydrogen, ethanol, methanol and methane (natural gas) fires and like the other detectors in its family, it responds to Type A, B and C flaming fires.

Fire Sentry SS4-AUV

The Fire Sentry SS4-AUV represents the leading edge technology UV optical flame detectors. This flame detector senses radiant energy in the ultraviolet (UV) spectrum. The radiant emissions of flaming fires will alert the detector to their presence. The SS4-AUV is for indoor applications where UV sources such as welding are not present.

Operation

The Fire Sentry SS4 detectors operate from standard 24 Volt DC power and interface to approved fire alarm panels or standard PLC's. On power up, a self-test is performed and the fault relay resets to show no faults. The front LED lights flash every ten seconds to indicate power is on.

The continuous spectral data stream of information from the sensor array is analysed by the microprocessor. Upon alarm, the detector activates the alarm relay and stores all the pre-fire spectral data in non-volatile memory for retrieval and evaluation. This Fire Pic™ data can be used to postulate the cause of the fire. As part of the FS2000™ System, the SS4 family of detectors communicate with CM1-A Controller via a four wire bi-directional RS-485 FireBus™.

The field of view for the Fire Sentry SS4 detectors is the widest in the industry with a 120° cone of vision. This means more hazard area can be covered by each detector. Greater sensitivity also increases the volume covered by each detector; up to four times more than some other detectors.

Using sophisticated microprocessor signal processing algorithms, false alarm rejection is maximised - with virtual immunity to false alarms from arc welding, corona discharge and other common non-fire sources.

Fire Sentry SS4-A and SS4-AS Features:

• Multi-Spectrum™: senses ultraviolet, visible and wide band Infrared™
• Built-in test for optical "through the lens" testing
• False alarm immunity
• Detects hydrocarbon and non-hydrocarbon based fires
• Wide field-of-view and solar-blind
• Adjustable detector sensitivity
• Microprocessor based algorithms: FirePic™, Snapshot™ and Tri-Mode Plot™
• Wide temperature range of operation
• Compatible with standard approved fire alarm panels
• Explosion-proof housing
• Time programmable alarm verification
• mA output option
• Meets SIL 2 requirements

Fire Sentry SS4-AUV Features:

• Senses solar-blind ultraviolet band
• Built-in test for optical "through the lens" testing
• Utilises long-life, ruggedised UV sensors
• Detects hydrocarbon and non-hydrocarbon based fires
• Wide field-of-view and solar-blind
• Adjustable detector sensitivity
• Microcomputer based algorithms: FirePic&trad;, Snapshot™ and UV Plot
• Wide temperature range of operation
• Compatible with standard approved fire alarm panels
• Explosion-proof housing
• Time programmable alarm verification
• mA output option

Applications include:

• Petrochemical facilities and Refineries
• Co-Generation plants
• Aircraft hangars
• Silane and Hydrogen gas storage
• Gas Turbines and power plants
• Gas compressor stations
• Warehouses
• Semiconductor

SS4-A2-H Multi-Spectrum Electro-Optical Digital Fire & Flame Detector, Aluminum UV/IR, FM, Hydrocarbon Fires, Non Latching Alarm LED, FM, cFM, CSFM for Class I, Div.1 groups B,C & D (2) 3/4 NPT with SS4-FSCHCOM SS4 Module HART by Honeywell Analytics

The Fire Sentry SS4 Electro-Optical Digital Fire and Flame Detectors represent leading edge UV and UV/IR technology.

Fire Sentry SS4-A

The Fire Sentry SS4-A represents the world's pre-eminent UV/IR technology for ElectroOptical Flame Detectors with tens of thousands successfully operating in a multitude of installations worldwide. This multi-spectrum detector senses radiant energy in the ultraviolet (UV), visible and wide band Infrared™ (IR) spectrum. The radiant energy from all types of flaming fires will alert the detector to their presence.

To eliminate common nuisance false alarms that occasionally occur with UV-only, IR-only, Dual IR or Dual Mode UV/IR detectors, the Fire Sentry SS4 detectors' FireLogic signal processing requires that UV, visible and wide band IR radiant energy all be evaluated before declaring a fire. The smart detector utilises real-time signal processing algorithms that are optimised to alarm on all types of fires, while virtually eliminating the possibility of false alarms.

Fire Sentry SS4-AS

The Fire Sentry SS4-AS processes UV, IR and Visible (VIS) spectral ranges from ruggedised solar-blind UV, "Quantum-Effect" IR and VIS sensors correspondingly. It is optimised for detection of hydrogen, ethanol, methanol and methane (natural gas) fires and like the other detectors in its family, it responds to Type A, B and C flaming fires.

Fire Sentry SS4-AUV

The Fire Sentry SS4-AUV represents the leading edge technology UV optical flame detectors. This flame detector senses radiant energy in the ultraviolet (UV) spectrum. The radiant emissions of flaming fires will alert the detector to their presence. The SS4-AUV is for indoor applications where UV sources such as welding are not present.

Operation

The Fire Sentry SS4 detectors operate from standard 24 Volt DC power and interface to approved fire alarm panels or standard PLC's. On power up, a self-test is performed and the fault relay resets to show no faults. The front LED lights flash every ten seconds to indicate power is on.

The continuous spectral data stream of information from the sensor array is analysed by the microprocessor. Upon alarm, the detector activates the alarm relay and stores all the pre-fire spectral data in non-volatile memory for retrieval and evaluation. This Fire Pic™ data can be used to postulate the cause of the fire. As part of the FS2000™ System, the SS4 family of detectors communicate with CM1-A Controller via a four wire bi-directional RS-485 FireBus™.

The field of view for the Fire Sentry SS4 detectors is the widest in the industry with a 120° cone of vision. This means more hazard area can be covered by each detector. Greater sensitivity also increases the volume covered by each detector; up to four times more than some other detectors.

Using sophisticated microprocessor signal processing algorithms, false alarm rejection is maximised - with virtual immunity to false alarms from arc welding, corona discharge and other common non-fire sources.

Fire Sentry SS4-A and SS4-AS Features:

• Multi-Spectrum™: senses ultraviolet, visible and wide band Infrared™
• Built-in test for optical "through the lens" testing
• False alarm immunity
• Detects hydrocarbon and non-hydrocarbon based fires
• Wide field-of-view and solar-blind
• Adjustable detector sensitivity
• Microprocessor based algorithms: FirePic™, Snapshot™ and Tri-Mode Plot™
• Wide temperature range of operation
• Compatible with standard approved fire alarm panels
• Explosion-proof housing
• Time programmable alarm verification
• mA output option
• Meets SIL 2 requirements

Fire Sentry SS4-AUV Features:

• Senses solar-blind ultraviolet band
• Built-in test for optical "through the lens" testing
• Utilises long-life, ruggedised UV sensors
• Detects hydrocarbon and non-hydrocarbon based fires
• Wide field-of-view and solar-blind
• Adjustable detector sensitivity
• Microcomputer based algorithms: FirePic&trad;, Snapshot™ and UV Plot
• Wide temperature range of operation
• Compatible with standard approved fire alarm panels
• Explosion-proof housing
• Time programmable alarm verification
• mA output option

Applications include:

• Petrochemical facilities and Refineries
• Co-Generation plants
• Aircraft hangars
• Silane and Hydrogen gas storage
• Gas Turbines and power plants
• Gas compressor stations
• Warehouses
• Semiconductor

T4-ZOCA-PL-CRD T4 Personal Gas Monitor, 3 Gas - O2, CO, CH4 % LEL, Alternate Alarm Levels / Certifications, Cradle Charger by Crowcon

T4 integrates innovative safety features and an intuitive, rugged design to provide advanced protection for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H₂S), flammable gases and oxygen (O₂) depletion.

Features

• TWA resume function - unique to T4, this innovative feature ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
• 18 hour battery life - safely work multiple or longer shifts between charges, covered by the 18 hour battery life.
• Backlit display - large, clear display with backlight and option to flip the screen 180° for easy viewing while worn.
• Rugged design - with a thick anti-shock rubber casing and drop-tested to 13.1 feet on concrete, T4 provides dependable operation under the most demanding use.
• Water & dust-resistant to IP65 & IP67 - provides protection in the harshest environments.
• Dedicated sensors - one sensor for every gas ensures effective, fast and reliable detection.
• Positive safety indicator - a simple 'traffic light' status indicator which, at a glance, provides visual assurance of operational and compliance status to both users and supervisors. Green light - Working safely. Red light - Attention required
• Intrinsically safe - ATEX approved and UL Class 1 Div 1 for safe operation in a wide range of hazardous environments.
• Multiple alarms - audible 95dB alarm, bright red/blue LED's and vibrating alerts provide effective warning to gas hazards.
• Easy operation - large single button and intuitive menu system minimize training and allow easy operation while wearing gloves.

TK6805-Z On-Premise Laundry Combination Kit by AquaPhoenix

Contains: Chlorinated Alkaline/Total Alkalinity Test Kit, Total Hardness Test Kit, Chlorine Test Kit, Chlorine OTO Residual Test Kit, Iron Residual Test Kit, Test for Final Fabric pH - Sour Tester, 1-12 pH Test Strips, Vial 10-50 mL (3), Vial 5-25 mL & Syringe 12 mL

TOC-750-PID01 TOC-750 Series 2-Wire Addressable Gas Detector, PID's VOC, 100ppm by IGD

The TOC-750 series redefines gas safety with our cutting-edge Sentinel+TM technology providing addressable, streamlined gas detection. This revolutionary system uses our 2-Wire system to connect all detectors and provide both power andcommunication.

It offers uncompromised safety at a lower cost, with each detector node boasting individual I/O capabilities for precise distributed control, and data management wherever it s needed. Plug-and-Play sensor options for over 700 gases, and modular functionality, combine to make the TOC-750 the most versatile sensor on the market.

Easy Installation

• 2-Wire Addressable system minimises installation time and costs.
• Ready to use with 1-click auto setup and self-check.
• Polarity independent cable.

Simple Servicing

• Intuitive plug-and-play pre-calibrated detectors.
• Auto-detect sensor change for automatic updates on ranges, gases, and alarms.

Unparalleled Versatility

• I/O points put you in control of valves, beacon sounders and other external devices.
• Accommodates 4-20mA signal inputs for system integration.

Peace of Mind

• Designed and manufactured in the UK.
• Backed up by more than a century of expertise and our 10-year guarantee.
• All compliance is supported by third-party certification.

DC580C3 Airflow Meter Kit by Test Products International

Features

• Measure air velocity & temperature simultaneously
• Automatically calculate CFM
• Field replaceable hot-wire probe and vane probe
• Telescoping 38" hot-wire probe with ruler markings and flat edge for easy and proper probe alignment
• Communicate with smart phone using built in Bluetooth and Free TPI App
• Rubber boot provides protection; magnets on the back of boot provide hands free use
• Record minimum, maximum & average
• Measuring units: ft/min, mile/h, knots, m/s, km/h

Applications:

• Air velocity measurements in HVAC systems
• Air duct traverse and ventilation analysis to balance commercial and residential HVAC systems
• Fume hoods, floor registers, exhaust grills & more

Air Velocity

• Vane: 80 to 4900 fpm; 0.4 to 25 m/s
• Hot Wire: 40 to 3900 fpm; 0.2 to 20 m/s

Temperature

• -4°F to 140°F (-20°C to 60°C)