All Products

*Please note we can only ship RKI products to customers within the United States

36" Versa-Kool Extreme High Velocity Misting Fan, 3-Phase, 50 Hz, Unassembled

173A Autoranging DMM with boot, test leads, battery and manual by Test Products International

LCD Display
4000 count with 42 segment bar graph.

REC (Record Mode)
Store minimum and maximum readings over a measurement period.

RANGE
Manually select the appropriate range

AC/DC
Manually select AC or DC measurement function.

(Continuity Buzzer and Diode Test)
Toggle between continuity buzzer or diode test on Ohm function.

High Resolution DCmV Range
Additional 40 millivolt range with 0.01mV resolution for improved accuracy when performing low voltage measurements.

ACV (AC Volts)
Measure the voltage of ABS wheel sensors.

DCV (DC Volts)
Measure the voltage of circuits and sensors.

Hz/Duty (Duty Cycle)
Measure in percent the "ON" time of sensors or other devices.

REL (Relative Mode)
Factor out lead resistance for improved low ohm measurements or compare readings to a known standard. Can also be used for differential measurements.

HOLD
Lock the reading on the display for hard to read locations for future reference.

Ω (Ohms, Resistance)
Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring.

AC/DC Current Functions (Amps)
Measure the parasitic draw from the battery with ignition off.

Hz (Frequency)
Measure the frequency of sensors and signals.

CAP (Capacitance)
Measure the capacitance of condensers or capacitors found in today s hybrid automobiles.

Built in Tilt Stand
The tilt stand is built into the instrument housing.

Quickly Test Condition of Internal Fuses
You can determine the status of the internal fuses before you open the battery/fuse compartment. Simply set the instrument to the diode test function, plug the black test lead into the "VO2" input jack and touch the prod end of the black lead to the metal inside the "A" or "UAmA" input jack. If the meter reads "OL", the fuse is blown. If there is a reading on the LCD besides "OL", the fuse is good.

Separate Fuse/Battery Compartment
Easily replace fuses and batteries in this separate compartment. Fuses are clearly labeled with preplacement part number.

Features:

• REC Records Min/Max readings during specified measurement intervals.
• RANGE Allows the user to manually range the 173A instead of autoranging.
• HOLD Holds the reading on the display for easy viewing.
• REL Displays the value as a difference to a reference value.
• AUTO OFF Preserves battery life.

ZC3-505-o2 USB 3 Digital Video Camera by Zarbeco

An ultra-compact, scientific quality camera for machine vision or microscopy, the ZC-505-03 is fully UVC compliant (including DirectShow) so it is compatible with the hundreds of programs which already support this popular standard.

The 2592 x 1944 pixel array updates at 15 frames/sec at full resolution or 30 frames/sec. at 1920 x 1080 pixels over USB3. The camera is backward compatible with older computers that have a USB 2.0 port -- running at a lower frame rate.

Since the ZC-505 is fully powered from the USB 3 port, it is the perfect choice for mobile imaging applications.

The ZC-505 camera includes Video ToolBox Pro software, which provides full control over the camera, an easy-to-use interface for image capture, and advanced labeling, annotation and measurement features. Additional software provides advanced control of the exposure, including automatic or manual control of gain and exposure, white balance, and image integration for low-light imaging.

Features

• 2592 x 1944 pixels
• USB powered
• Connects directly to laptop or desktop computers with USB 3 (backward compatible with USB 2 at lower frame rates)
• Windows (32 and 64 bit)
• Optional MAC software
• Optional Video ToolBox Premier Software
• Includes PC software to capture still images and movies, with labeling, annotation and measurement

Applications

• Microscopy (brightfield, darkfield, fluorescence)
• Inspection
• Video Documentation
• Mobile Imaging
• Photo ID Systems
• Webcasting

Software

• Capture Program: Video ToolBox PRO
• Drivers: none required

Computer Requirements

• Windows XP/Vista/7/8/10 (32 or 64 bit)
• MAC OS X 10.6+ (Mac Software Optional)
• Free USB 3.0 Port (backward compatible with USB 2.0 at slower speed)
• DirectX 8.1 or greater
• Pentium IV 1.6+ GHz or faster (i Core 1.5+ GHz recommended)
• 1+ GB of Free Memory (2+ GB recommended)
• Video card with 64+ MB of video RAM, minimum 800 x 600 resolution at 16-bit (65,000 colors)

Suggested Products

• Foot Switch
• Video Averager
• Particle Analyzer
• FocusLock
• Video ToolBox Premier

LabSen 553 Plastic Combination Spear pH/Temp. Electrode by Apera

Backed by proprietary Swiss sensor technology and materials, the LabSen® 553 3-in-1 pH/Temp. Spear Electrode/Sensor/Tester is designed for testing soil directly (This is a replacement probe for Apera PH850-SL, PH9500-SL).

Long-Life Reference System - The LabSen 553 pH electrode adopts a long-life reference system, which is composed of a glass tube, AgCl and a reference silver wire. The top end of the slim glass tube is stuffed with cotton, which prevents the reaction between AgCl and electrolyte when the temperature changes. It improves the stability of reference electrode and extends the service life of the electrode.

Polymer Electrolyte - The solid polymer electrolyte makes the electrode hard to be contaminated and maintenance-free.

Special Glass Membrane - The LabSen 553 pH electrode adopts a spear sensor tip, which is ideal for directly testing semi-solid samples like soil.

Compatible Apera Instruments' meters: PH700, SX823-B, MP511, PH800, PC800. May NOT work with other brands' meters because the temperature unit might be incompatible. The electrode is backed up with a 6-month warranty by Apera Instruments.

• Proprietary pH sensor technology and materials from Switzerland
• Special LabSen Spear pH sensor tip, ideal for direct soil pH testing. No more slurry making.
• Pom housing, ideal for use in harsh environments
• Polymer electrolyte - not more clogged junction
• Long-life reference system, improving the stability of reference electrode and prolong the service life of the electrode

*Please note we can only ship RKI products to customers within the United States

GS-HG-A-074-G Gasman Single Gas Monitor, 0-5% Carbon Dioxide IR, Rechargable Battery, Polish Safe Area only by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

VTS-00231100101 Ventis MX4 Multi-Gas Monitor, H2S, O2, Li-ion, Desktop Charger, Without Pump, Black, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

WD-35635-15 T-100IR Portable Infrared Turbidity Meter Kit by Oakton

The Oakton T-100 series portable turbidity meters feature five calibration points—0 NTU, 20 NTU, 100 NTU, 400 NTU, and 800 NTU. The 0 NTU uses laboratory distilled or deionized water, while the other four calibration points are configured using high molecule polymer standard solutions included in the kits. The meters also include normal and continuous measurement modes, parameter setup, data recall, real-time clock, calibration date check, automatic power off, and low voltage indication. The continuous measure mode allows you to automatically generate average, maximum and minimum measured values in a data storage interface, suitable for sample solutions with rapid settling and continuous measurement changes.

The large TFT color screen displays a blue background for measurement mode, green background for calibration mode, and features operation guides for easy calibration and measurement. Up to 200 sets of data can be stored on the meter. A USB interface cable can transfer this data to your computer for future analysis.

• Auto-ranging from 0 to 1000 NTU (FNU)
• Stores up to 200 sets of data
• Suitable for field use—meets IP67 water-resistant requirements
• Infrared light source delivers high accuracy across entire range
• Meets performance criteria as specified by ISO 7027 (DIN EN 27027) method

Includes

Six 25 x 60 mm sample test cuvettes, five 60-mL polymer standard calibration solutions (0.0, 20, 100, 400, and 800 NTU), 10 mL of silicone oil, microfiber wiping cloth, PCLink software on USB flash drive, hard carrying case, rechargeable Lithium battery and USB cable with power adapter.

66-6209-99 T2A Sensor/Transmitter with j-box, Ozone (O3), 0-100 ppm by RKI Instruments

The T2A Series toxic gas detector is a versatile assembly that uses an electrochemical sensor to detect a variety of gases. 2-Wire loop-powered to withstand extreme climatic conditions and harsh environments. Magnetic switches allow for nonintrusive calibration while in the field.

Features

• Electrochemical Sensor
• Loop-Powered (2-Wired), 4-20 mA output
• 3 Character, 7 segment display screen with backlight
• 3 Push-button interface (ADD, MENU, SUB) with corresponding magnetic, non-intrusive switches
• Operating temperature range -40°C to +55°C
• Aluminum device enclosure
• 303 Stainless-steel sensor housing
• 1-Year warranty

Industry Applications

• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Pulp & paper mills
• Manufacturing facilities
• Automotive
• Semiconductor plants
• Chemical plants

*Please note we can only ship RKI products to customers within the United States

1290-0072 Vertex M Rack (110 VAC) with One (1) Universal Chemcassette Analyzer by Honeywell Analytics

Vertex M is the industry's most flexible, advanced toxic gas monitoring system offering parts per billion detection levels and physical evidence of a gas leak. Vertex M ensures productivity as well as life safety.

Flexible

The Vertex M System includes as standard one eight-point analyzer. As your monitoring needs change, Vertex M expands, offering you up to 24 points of continuous gas detection. Place your sampling points up to 400 feet (120 meters) from the system. There is a choice of universal analyzer modules and/or pyrolyzer analyzers. (Note: If Vertex M is used with one pyrolyzer module, the maximum number of points of detection is 16.)

Reliable

Vertex M offers powerful, built-in system redundancy as standard equipment to effectively safeguard against downtime.

• Back-up pump and internal power module
• Chemcassette® technology provides physical evidence of gas event
• System data back-up (if main data acquisition PC fails, analyzers continue to monitor, log data and alarm)
• Automated leak test with line integrity option

Easy to use

• Touch screen for easy access to data
• Software updates via CD-ROM or network to all system components
• Configuration profile editing and data retrieval are all achievable without taking unit offline
• Radio frequency identification tag (RFID) ensures Chemcassettes® are installed into appropriately programmed analyzer, eliminating human error
• On-line help system

Security

• Multiple levels of password protection
• Reconfigure security setup without taking unit offline

Low cost of ownership

• Vertex's M smaller footprint and greater density of points reduce your cost per point
• Eight points per analyzer lowers Chemcassette® costs
• Maximized 24 point systems provide low cost per point as compared to other continuous monitors
• One system monitors up to three gas families and more than 40 gases
• You can split your sample to more than one analyzer

Easy to maintain

• Vertex M uses cost-effective XP Chemcassettes®, providing up to three months of continuous monitoring
• Simplified replacement of Chemcassettes® and automated optics verification
• No dynamic calibration required
• One-touch flow balancing
• Easy access to analyzers, pumps, power supplies and touch screen from front panel
• Onscreen interactive electronic manual

Advanced communications

• Built-in configurable PLCs with optional 64 relay contacts non-isolated; 32 isolated
• Standard OPC interface for easy integration into your existing factory automation system or HMI
• Optional Ethernet/CIP, LONWORKS®, DeviceNetTM, DF1 Interface, PROFIBUS, Modbus Plus, Modbus/TCP, ControlNet or 4-20mA outputs available
• Optional Chemcam camera permits viewing of stain, locally or remotely, for proof of gas event. Image is electronically saved for future retrieval.
• Optional remote control/viewing software enables total visualization of the monitor screens at a remote PC

36CFO-B 36" Circulation Fan, Black OSHA Guards by Schaefer

Schaefer OSHA compliant circulation fans meet all OSHA safety regulation while delivering maximum airflow. These 2-speed fans have the versatility to be mounted on a ceiling, wall, pedestal or cart, which makes them the ideal cooling solution for any commercial, industrial or agricultural facility.

Features and Benefits

• Matched direct drive motors and blades for highest achievable levels of airflow, rated up to 12,000 cfm
• Powder coated steel guards for corrosion resistant and durability
• Energy efficient designed for additional cost savings, draws as little as 1.6 amps
• Thermally protected, heavy-duty, maintenance free, 2-speed motors for long life
• Two year warranty
• Made in the USA

WD-89800-13 TC9600 Benchtop Temperature Controller with USB Output, for Thermocouple, RTD, or Thermistors; 115 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

The advance controllers also include a USB communication port, audible alarm, external alarm relay output, and a detachable power cord. Free software features real-time graphing, logging of measured temperature and set point temperature, help menu, and ability to interface with other Windows-based programs.

Includes

grid support bracket, electrical noise canceling ferrite clip, and 6 ft power cord with U.S. standard plug.

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting
• Free software offers remote computer control of system operations
• Program up to nine ramp and soak profiles of up to 16 segments each

59-120-1M RG59/U, BNC Male to BNC Male, 10 feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

GHS1024 Wallet Cards (50/Pkg), Spanish by GHS Safety

HazCom GHS Wallet Cards are a quick and easy reference to the new HazCom GHS pictograms and their meanings. One side of the card provides the complete set of HazCom GHS pictograms with a detailed description of each. The other side contains the list of information required to be found on an S. D. S. (Safety Data Sheet) as well as the images of the various Precautionary Statement Pictograms. Printed in full color to match the look of the HazCom GHS system requirements. Each card is 4-1/4" x 2-1/2" with rounded corners. Covered in a heavy lamination on both sides to provide long term durability in pockets or wallet.

Sold in packages of 50.

Part Number: M101635PA