All Products

MCXL-X000-Y-OR GasAlertMicroClip XL Detector, Oxygen (O2) - Yellow Housing, OR Version (Other Regions, 3-pin UK plug) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXLX000YOR

6400-0023 MGS-250 Infrared R410A Replacement Detector by Bacharach

Bacharach's new MGS-250 Infrared Refrigerant Gas Transmitter is the leader in performance and flexibility at an economical price. There are two versions available - a cost-effective broadband sensor used for gross leak detection or gas-particular versions that are even more distinct, pre-calibrated and characterized for response to specific refrigerants. Its simple-to-use interface gives the user the ability to set all parameters and outputs without opening the unit, moving jumpers, using mulitmeters or adjusting potentiometers.

The MGS-250 family is a cost effective solution for detecting a variety of refrigerants without the limitations posed by solid-state sensor technologies. The long-life, proprietary NDIR infrared sensor allows for accurate low-level leak detection (0-3,500 ppm), delivering up to 5-7 years of maintenance-free operation without the need for costly annual gas calibrations. Infrared sensing technology makes the MGS-250 immune to cross sensitivities to combustible and toxic gas as well as changes in temperature and humidity. The unit has an alpha-numeric LED display to show constant real-time readings, an on-board LED indicator for when the sensor is in an alarm state, and an audible alarm to alert personnel in the area that levels have exceeded the desired limit. An optional protective splash guard is available for use in areas with high water spray such as food and beverage facilities or chiller rooms.

Features & Benefits:

• Long-life, Non-Dispersive Infrared (NDIR) sensor allows for accurate low-level leak detection
• Detects all refrigerants (CFC, HFCs, HCFC, HFO's), including HFO1234YF, HFO1234ZE, R410a & R22
• Fast-responding, refrigerant-specific sensor with no cross interferences to other gases
• No field calibrations required
• Modbus RTU interface to connect to BAS/BMS systems and on-board alarm relay
• User selectable analog output: 4-20 mA, 0-5V, 1-5V, 0-10V, 2-10V
• Bright, alpha-numeric LED real-time display with on-board audible and visual alarms

0019-8120 Monoxor XR with standard 12 in. probe, IrDA wireless printer and Fyrite User Software in rugged protective carrying case (Reporting Kit) by Bacharach

MSA Bacharach's Monoxor® XR is a portable exhaust gas analyzer designed to measure high CO from forklifts and other combustion engines burning propane, gasoline, diesel, LPG and CNG. View and save your CO readings in real-time from the numerical or graphical display screens. The Monoxor® XR is available with precalibrated, Sensor Exchange Program sensors to minimize downtime and maintenance costs. The analyzer is also compatible with MSA Bacharach's Combustion App which allows users to quickly create / share custom reports (available for Android & iOS).

Features

• Exhaust Gas Carbon Monoxide
• Ambient Carbon Monoxide Test
• Automatic CO Alarm
• Graphical and Standard Display Screens
• IR Printer with Magnet
• Exhaust Gas Temperature
• Precalibrated Sensor Exchange Program

Benefits

• Measure CO flue gas directly from engines
• Measure ambient CO levels for safety and indoor air quality tests
• Alerts the user to potentially dangerous levels of CO
• View real-time CO readings in graphical or standard formats
• Print combustion and emissions reports in the field
• Type K thermocouples input for temperature capability
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

Measuring Range: -100 to +400 °C

SD-1EC-CO SD-1EC Detector Head, 0 - 75 ppm CO (Carbon Monoxide), 4-20 mA Transmitter by RKI Instruments

RKI Instrument's model SD-1 Series smart combustible gas, toxic gas, oxygen, and organic vapor detector/transmitter is a robust and reliable explosion proof design for detecting LEL and ppm levels of hazardous atmospheres. In addition to measuring the common %LEL levels of methane, hexane and isobutane, for example, the SD-1 Series also has the capability of measuring a wide variety of toxic organic compounds in a PPM range such as acrylonitrile, ethylene oxide, n-methyl pyrolidone, methylene chloride and many others. This gives the SD-1 Series a unique niche in RKI's gas detector line-up. The SD-1 has an ATEX/IECEX approval for the explosion class ExdIICT5 and has an IP-65/67 ingress protection rating.

The SD-1 has a 4-20mA signal output as well as relay contacts for interfacing with other control systems or monitoring facilities. All SD-1 types are also available with HART communication instead of 4-20mA relay. SIL2 is available for the IR, EC and OX types. In facilitating non-intrusive conditions in hazardous atmospheres, the SD-1 can be calibrated and it's menus navigated with magnetic switches and a magnetic key.

Features

• Wide range of detectable gases: % LEL Combustibles, catalytic; % LEL Combustibles, IR; H2S, CO, & O₂; PPM for acrylonitrile, hydrogen, ethylene oxide, n-methyl pyrolidone, methylene chloride, and many others
• Sensor types include: Catalytic, Galvanic Cell, MOS, IR, & Electrochemical
• Direct digital display of gas readings
• HART Communication protocol or 4-20 linear output
• Available with SIL2 approval (IR, EC, OX versions)
• Easy maintenance using a magnetic key
• Self-diagnosis by microprocessor
• Low power operation (Maximum: 3W)
• Explosion proof: ATEX, IECEx, ExdIICT5

Applications

• LNG Terminal
• Petrochemical/Chemical plants
• Power plant
• Utilities
• Iron and steel works

*Please note we can only ship RKI products to customers within the United States

0560 4401 440 Air Velocity & IAQ Measuring Instrument by Testo

The testo 440 air velocity and IAQ meter combines all the benefits of a compact handheld device with intuitive measurement menus and a comprehensive selection of air velocity & IAQ probes. This means you have all measuring tasks on air conditioning and ventilation systems reliably under control.

You can connect the testo 440 to a large selection of digital probes, the testo Smart Probes, or even numerous Testo temperature probes, allowing for numerous configurations to meet your needs. The clearly structured menus for measuring volume flow in ducts and at outlets, cooling/heating load, K-factor, turbulence, mold indication and even a data logging mode are stored on the instrument for additional convenience. These menus enable you to accomplish the relevant measuring task more quickly, more efficiently and more reliably than ever before. Reports can also be exported as excel files via the USB interface or printed out directly on site.

The testo 440 air velocity & IAQ meter is available in two versions. The standard testo 440 and the testo 440 dP model version, which includes an integrated differential pressure sensor. This makes measurements at filters as well as Pitot tube and K-factor measurements possible.

• Intuitive: Clearly structured measurement menus for volume flow, heating & cooling load, K-factor, turbulence, data logging, mold indication, and more.
• Convenient: Testo 440 kits include instrument-specific wireless and wired probes that offer greater measuring convenience and the instrument also connects to testo smart probes.
• Space-saving: A universal Bluetooth or wired handle for all probes means more applications, with less equipment.
• Efficient: Internal memory for up to 7,500 measurement points, a USB interface for data export and optional printout of all your measuring values.

Kit Includes:

• Air velocity & IAQ meter
• 3 x AA batteries
• USB cable
• Calibration protocol

Part Number: MCX3-FPCB1

GPP-0003-NU-A Gas-Pro IR 5-Gas Confined Space Entry Monitor, Dual CO+H2S/O2/LEL IR CH4/PID - Pumped, includes Flow Plate and Multi Region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

EC950 Benchtop Cond./TDS/Salinity Meter Kit with TestBench by Apera

Basic Features

• Comes with Apera TestBench that incorporates a flexible electrode holder, an intelligent stirrer, and buffer organizers altogether, streamlining the process of pH measurement and calibration.
• Intuitive operating navigation with natural language and graphics
• Multi-language operating system (English, German, Spanish, Mandarin)
• Automatic calibration, automatic temperature compensation, self-diagnosis.
• Manual data logger with 200 groups of storage

Conductivity Features

• The 2401T-F glass conductivity/temp. electrode designed for research-level conductivity measurement from 0 to 200mS/cm at ±1% F.S accuracy
• 1 to 4 points automatic calibration with calibration instruction and self-diagnosis
• Single tap to switch from conductivity to TDS and salinity
• Automatically recognizes conductivity standard solution (84μS/cm, 1413μS/cm, 12.88mS/cm, 111.8mS/cm).
• Standard BNC conductivity connector, RCA connector for a temperature probe, NTC 30KΩ thermistor

GPF-0013-NU-A Gas-Pro IR 4-Gas Confined Space Entry Monitor, H2S (0-100ppm)/O2/LEL IR CH4/PID, Non Pumped, includes Flow Plate and Multi Region PSU by Crowcon

Crowcon Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the Crowcon I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User friendly

• Top mount display
• Simple single button operation
• Intuitive functionality
• Makes it easy to read at a glance
• Reduces training time
• Can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail safe flow plate recognition
• Specific and unique Pre-Entry Check (PEC ) mode
• Offers multiple uses within one compact detector
• Takes away the pain of pre-entry testing

Reliable

• Reliable lithium-ion battery
• Water and dust resistant to IP65 and IP67
• Bump and calibration reminders
• Provides over 14 hours use from a 7.5 hour charge
• Capable of withstanding harsh environments
• Full compliance

2108N5102H Optima Plus Gas Detector, Z ETH UL/INMETRO FLOW HSG HART by Honeywell Analytics

Market leading point infrared Hydrocarbon gas detector offering proven performance and sensitivity

With over 40 years experience in the design, manufacture, installation and maintenance of point infrared gas detection, Honeywell Analytics currently has a Worldwide installed base of over 100,000 infrared point Hydrocarbon gas detectors in a wide spectrum of applications from light industrial to the most demanding of offshore petrochemical environments.

Searchpoint Optima Plus is an infrared point Hydrocarbon gas detector certified for use in potentially explosive atmospheres. The unit's infrared detection principle offers the fastest speed of response and fail-to-safe operation, ensuring that your plant is compliant, your personnel are protected and your production process can deliver maximum uptime. Reduced routine maintenance, when compared with conventional electro-catalytic based gas detectors, provides low ongoing cost of ownership. The development of advanced internal fault diagnostics and false alarm rejection algorithms ensures that Searchpoint Optima Plus delivers the highest level of operational integrity.

Typical applications include environments that may suffer from the presence of catalytic bead poisons or inhibitors, or where there are harsh environmental conditions forcing increased time between routine maintenance, for example; offshore oil and gas platforms, floating production storage and offloading (FPSO) vessels, tankers, onshore oil and gas terminals, refineries, LNG / LPG bottling plants, gas compressor / metering stations, gas turbine power plants, refineries, solvent printing and coating plants.

Over 100 gas and vapour calibrations are available. For a list of detectable gases and vapours, please contact our Customer Support team or your local distributor.

Why Infrared?

• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

Why Searchpoint Optima Plus is the right choice...

• Experience gained from over 100,000 units installed worldwide
• Improved reliability
• Optional HART® over 4-20mA output
• Can detect a wide range of hydrocarbon gases including solvents
• Increased reliability with no moving parts
• Increased stability from self compensating optics
• Immune to long term component drift
• Remote functional gas test facility
• Certified for North American and European Hazardous areas
• Increased false alarm rejection
• Increased uptime with contaminated optics warning
• Dynamic Heating Control ensures condensation free optics
• No undetected failures
• Improved diagnostics
• Integral event logging
• Reduced power consumption
• Certified to many hazardous area classification schemes including: European (ATEX), UL, CSA, IECEx and more

NOVO 1-P-S 2-Gas Novo Pro Kit with Short Hose: Long-Life O2, CO, CO2, Built-In Printer, CO-Dilution, Combustion Efficiency, Excess Air, Draft, Pressure, Temperature, 12" Probe with 6' Hose, Hard Plastic Carrying Case, & Mobile Apps (iOS and Android) by Seitron Americas

• 7" Touch Screen for easy menu navigation
• Simultaneous Gas Pressure + Combustion Measurements
• Optional Built-in Printer
• Long Life O2 Sensor (4 Years)
• New Dual Range (Low/High) Sensor Technology
• Low NOx and SOx sensors
• 15 Preprogrammed Fuels
• Including Natural Gas, Oil, Propane, & Biofuels
• CO Protection Dilution Pump
• Rechargeable Li-Ion Batteries
• Integrated water trap with LED backlight for easy maintenance
• Differential Pressure Manometer
• Draft Measurement
• Mobile App for iOS and Android

Every Kit Includes

• Combustion Analyzer
• Gas probe with 12" (300 mm) interchangeable tip
• 10 ft (3m) Single Connection Hose
• Integrated water trap
• Manometer Hoses
• Outdoor Combustion Air Temp Probe
• AC Power Adapter & Cable
• Hard plastic kit case
• Quick Guide
• Calibration Certificate

Main Features

• Precalibrated Gas Sensors
• Field Replaceable
• Altitude Adjustment
• Integrated magnets
• Automatic autozero (with gas sampling probe inserted in the chimney)
• Self-diagnosis with verification of the functions and status of the sensors
• Language selectable by User
• 100,000 test memory
• Dimensions: Analyzer 10.6x3.6x2.7in (270x93x68mm), weight 2 lbs (0.9Kg) - Kit 5x18x13in (125x465x335mm), weight 11 lbs (5Kg)

Measured Values

• Differential Flue Gas and Ambient Air Temperatures
• Incoming Air Temperature and Ambient Air Temperature
• Draft and Differential Pressure
• Ambient CO
• O2 and CO in flue gas

Calculated Values

• Combustion Efficiency, including condensing units
• Stack losses and excess air
• Flow velocity with optional Pitot tube
• CO Air Free