All Products

Part Number: UCSCAB20

Old Part Number: Z106750A
New Part Number: Z106750PA

72-6XYF-C GX-6000 Sample Draw Gas Monitor, VOC(11.7 ev)/CO2(0-10%), with Li-ion bat pack/100-240 VAC charger by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

GD-70D-H2O2-01 GD-70D Smart Transmitter, H2O2(hydrogen peroxide), 0-400 ppb by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

POLR02 Heated Diode Refrigerant Gas Leak Detector by Seitron Americas

The be cool R1 refrigerant leak detector is the essential tool to reliably detect all common refrigerants, thanks to the heated diode sensor. Different sensitivity levels allow the user to detect also the smallest leaks, with indication on the display or with an alarm.

• Highly sensitive, responsive and long-lasting sensor
• Reliable and easy detection of refrigerant leaks, with Automatic or Manual modes
• Detection of most common refrigerants: CFCs, HFCs, HCFCs, HFOs and blends

6302-0026 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100 ppm, Electro-Chemical by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

• Mobile App Interface
• Pre-calibrated Sensors
• Semi-automated Calibration
• Remote Sensor Option
• Temperature-Compensated Measurement
• Low Temperature Performance
• Digital Communications
• Analog Outputs
• Relay outputs
• Audio & Visual Alarms
• Multiple Cable Entries and Terminals

Benefits

• Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
• Fast and easy sensor maintenance. Eliminates need for calibration gas.
• Easy calibration process with mobile app. Generate calibration certificates for documentation.
• Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
• Mitigates false alarms and optimizes accuracy in refrigeration applications.
• Suitable for use in cold rooms and freezers down to -40° F/C.
• Integrate with local BMS/BAS via Modbus RTU
• For current or voltage output to legacy systems (MGS-450/460)
• 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
• On-board alarm notification supports compliance with ASHRAE 15 / EN 378
• Quick and easy installation of all wiring; daisy-chain power and digital communications.

*Please note we can only ship RKI products to customers within the United States

6352 VIS350 Service Camera with Detachable Camera Head 100ft. NTSC by Wohler

With the Wohler VIS 350 camera system, you have everything you need to inspect waste water pipes, flue gas and ventilation lines and industrial systems. With the pan & tilt camera head, the built-in transmitter and the Wohler L 200 Locator you can precisely locate the damage and accurately document the results of the inspection.

Wohler's camera system is both compact and safely housed in a plastic case for transport. The system consists of a 100 ft push rod cable with reel, a full color 1.5" pan and tilt camera and a large color monitor. The Wohler control panel ensures easy control of the camera head: The camera pans 360°, tilts 180° and offers the best-possible lighting to carry out an all-round inspection of the inside of the pipe. Particularly practical: After panning and tilting, the home function automatically aligns the camera angle to straight ahead with a simple push of a button. The ability to record videos allows the camera to capture exactly what it detects during the inspection. When damage is discovered, one quick press of a button is all that is required to capture and save a photo. To be able to assess and specifically target repair work, we at Wohler have perfected the technique of precisely locating damage. The actual distance count and the position of the head are displayed in the monitor. This feature is beneficial when dealing with extensive networks of pipelines. The position and angle of the camera head is displayed on the monitor, at all times. Precise localization of the camera head is available with the Wohler L 200 Locator.

• Video inspection system proven over many years
• Position and digital distance counter of camera head indicated in the display
• Keep your sense of orientation with home function
• 4 hour flexibility – 2 rechargeable batteries for lasting mobility
• Built-in transmitter with adjustable frequency enables precise localization of the camera head

Additonal Information

• Wohler VIS 350 Inspection Camera with digital distance counter
• Carrying case
• Detachable Ø 1.5" pan and tilt color camera head
• 4 GB SD card and mini USB cable
• 7" TFT color monitor
• 6' connection cable (removable monitor)
• 100' push rod Ø 0.26"
• 5 plastic domes
• 1 anti-slide mat
• 2 NiMH batteries with charger

6179MBK Digital pH/mV/Ion/Temperature Meter Kit by Jenco

Our 5th generation benchtop series consists of single and multi-parameter models, with or without Bluetooth connectivity. The 6179MB is a multi-parameter pH/ORP/ION/temperature Based Bluetooth Benchtop Meter that pairs with iOS and Android tablets to enable the same user experience as users' favorite apps while providing graphing, guided calibration procedures, data sharing, cloud data storage and user-defined compliance policies.

Renowned Accuracy and Repeatability

Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point mV offset calibration, 2 to 5 points calibration for ION.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Simple calibration with automatic buffer recognition of US and European buffers
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams
• CE, FCC ID, RoHS complaint

App-Enhanced Productivity

Free iOS and Android apps are as easy and convenient to use as users' favorite apps, and allow complete control of all on-meter functionality plus guided calibration procedures and much more.

Great User Experience

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• New aesthetical desgin, rugged detachable electrode holder arm

Improved Electrode Serviceability and Low Cost of Ownership

Standard BNC connector for pH, ORP or ION electrodes and temperature electrodes.

• BNC connector for pH, ORP or ION electrodes
• 8-Pin DIN for temperature probe

Easily Share Data Locally or to the Cloud

Share stored data to other apps such as Notes and Evernote or to cloud services such as Google Docs.

High Information Availability

Display pH, ORP and ION with temperature readings simultaneously with electrode efficiency, last calibration date and real-time graphing.

GLP-Compliant Data Storage

750 Sets of pH, ORP or ION and temperature data plus calibration data such as calibration date, buffers used, calibration slopes and calibration offsets.

Kit Includes:

• 6179M - Digital pH/mV/Ion/Temp Meter
• GB717DJ-P - pH Electrode, 3-ft Cable, Coil, RF, BNC Connector
• 110/240VAC - 110-240V Power Adapter

2813-4042-001 EC 28i Intrinsically Safe Transmitter with Sensor, Ammonia (NH3), 0-200 ppm For Flash Freezers, No Display by GfG

Features

• Full-featured smart transmitter for oxygen or a wide range of toxic gas measurement
• Non-intrusive AutoCal calibration adjustment
• Increased safety design to reduce installation cost in potentially hazardous locations
• Intrinsically safe (i) EX-Proof version
• BVS 04 ATEX E 132 X (electrical ex-protection) II 1G EEx ia IIC T4 C 0158
• Available in two configurations: Blind (no display), Display
• Barriers are required
• EX- conduit is not required
• Reduced installation costs

09035-19 Irreversible 5 to Point Vertical Temperature Label, 171 to 210°F/77 to 99°C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

AAA108000 Single Docking Station with 5 adapters by Senko

MGTP Single Docking Station is a compact, portable solution for efficient device management. It supports automatic calibration and bump testing, ensuring optimal performance. The station communicates with the MGTP device to select gases—up to six—for testing. With the MGTP device's internal pump, no external pump is required, streamlining operation.

KEY FEATURES

• Zero and Span Calibration, Bump Test: Performs calibration and bump tests to ensure proper SP-MGTP(Pump) device function.
• Gas Selection via MGTP Communication: Selects up to six gases for testing through communication with the SPMGTP (Pump) device.
• No Separate Pump Required: Utilizes the SP-MGTP(Pump) device's internal pump, eliminating the need for an additional pump.
• Real-time Status Indicators: Power and unit LEDs provide immediate operational feedback.
• Gas Ventilation System: Removes residual gas, ensuring a safe and clean environment.
• Event Log Storage: Saves calibration and bump test logs for easy access and analysis.
• User Configuration: Adjust settings via IR Link for flexible configuration.
• Battery and Power Options: Rechargeable battery or external power for continuous use.
• Compact and Lightweight: Easy to transport and use on worksites for efficient device management.

72-PIC-C GX-3R Pro 3 Gas Personal Monitor - LEL / O2 - SO2, 100 ppm - Li-Ion Battery Pack with 100-240 VAC Charger by RKI Instruments

The GX-3R Pro is the world's smallest 5-gas monitor weighing only 4.58 ounces and fits in the palm of your hand (2.9" W x 2.6" H x 1.06" D). It simultaneously monitors and displays 5 different gases. In addition to monitoring standard confined space gases, LEL, O₂, CO, & H₂S, the GX-3R Pro has a 5th channel where you can add infrared or toxic sensors. Two of the four sensor slots have interchangeable sensors providing flexible configurations, which can easily be changed in the field.

The GX-3R Pro comes equipped with Bluetooth wireless communication, man-down alarm, the choice of alkaline or rechargeable power supply, and a 3 year warranty. The Lithium-ion battery pack will operate for 25 hours and will fully charge in 3 hours.

The GX-3R Pro utilizes Bluetooth communication to display direct gas readings from the instrument to a phone app, which is available free on either iOS or Android phones. Automatic notifications can be programmed to send text or email messages, if there is an alarm event from the GX-3R Pro.

Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it's 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.

Features

• Smallest & lightest 5 gas monitor: 2.9" W x 2.6" H x 1.06" D , 4.58 ounces
• Simultaneous detection of 5 gases: LEL, O₂, H₂S, CO, and other optional sensors; H₂ Compensated CO sensor available
• Simple 2-button operation
• Bluetooth communication with iOS & Android App
• Non-Compliance Indicator
• 3 user adjustable alarm levels
• Panic Alarm - Tap instrument twice
• Man Down Alarm
• Impact resistant body
• Large full dot, auto-backlit display with auto-rotation
• Stealth mode for law enforcement
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

90550-52 Dampened Bottom-Con Bimetal Thermometer, 3" Dial, 6" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments

Measuring Range: -50 to +350°C

Part Number: 116L-125-25