All Products

Part Number: P19712VM2

2811-740-002 EC 28 Gas Transmitter with Hydrogen Fluoride (HF) Sensor, 0 - 10 ppm Range, Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG's proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds - just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm - Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG's GMA controller.

The EC 28 DA provides additional bright alarm LEDs and a buzzer - avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor - sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

72-6KFX-B GX-6000 Six Sensor Sample Draw Gas Monitor, O2 / CO2 (0-5%), with Alkaline Battery Pack / Li-Ion Battery Pack / 100-240 VAC Charger by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

Part Number: 34L-420

Part Number: P1016800PM4

9070CRT 9070 Smart Vibration Analyzer with Calibration Certificate by Test Products International

Vibration analysis at the touch of a button. Analyze and Interprets readings; incredible performance at an unbelievably low price. Overall machine and bearing conditions: vibration values are displayed with color coded alarm levels for ISO values and Bearing Damage (BDU).

Benefits:

• ISO Built-in Alarms
• Easily identify bearing problems with BDU Reading
• Easily identify problems with built in band filters: 1X (unbalance), 2X (misalignment), 3X (looseness)
• 800 line FFT (spectrum)
• Ruggedized IP67 case
• 3-year Limited Warranty

Features:

• Full Color OLED Display
• Built-in accelerometer with stinger. Optional long stinger and magnetic mount available

Applications:

• Commercial / Industrial HVAC
• Food Processing
• Manufacturers
• Mining
• Packaging
• Petrochemical
• Pulp and Paper
• Power Plants
• Utilities
• Automotive

MC745 EC Controller by Milwaukee

The Milwaukee MC745 PRO Conductivity (EC) controller and pump lets you measure and adjust EC levels automatically.

CONTROL THE EC AND FERTILIZER DOSAGE IN YOUR TANK AUTOMATICALLY

The MC745 kit includes the MC311 EC controller and two MP810 dosing pumps to automatically monitor and fine-tune EC levels. Just set your EC parameters and let the Milwaukee EC Controller and pumps do the rest.

The Milwaukee MC745 PRO controller kit is preferred by people looking to dial in their testing program when they have an ongoing need to maintain levels. Common uses are nutrient tanks.

The Milwaukee PRO EC controller and pumps offers:

ACCURACY

The Milwaukee PRO EC controller offers an accuracy to ±2% full scale.

AUTOMATION

The controller provides a control range of 0.0 to 10.0 mS/cm with alarms that activate when readings are higher or lower than set point.

COMPATIBLE DOSING PUMP

The Milwaukee MP810 dosing pump (designed specifically for use with the MC311) is included in the kit.

EASY INSTALLATION

The MC745 EC controller and pump kit comes with a complete mounting kit including a probe holder.

DESIGN FEATURES

• Fast easy to read current results with large digital LCD readout and visual LED alarm
• Accurate to ±2% full scale (0.0 pH to 10.0 mS/cm) with the user selectable high/low set points
• Simple one-point calibration for increased accuracy with manual trimmers for easy adjustment
• MA812/2 hardwired EC probe included
• 6.5 feet probe cables for extra flexibility when testing
• 12 VDC power supply
• Pump provides a maximum pressure of 1.5 bar or more than 50 feet of head pressure with a 0.16 GPM dosing flow.

Part Number: 10L-477

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

BDVFD240N4 VFD 3 Hp 200 / 240V 1- and 3-Phase NEMA 4X (Indoor / Outdoor) by Schaefer

Mist Control System (MCS) is available to control the misting accessory of your BIGDOG. The MCS senses ambient humidity and turns off the BIGDOG low pressure misting system when humidity rises, ensuring floors do not get wet and the air does not get over saturated.

STSOL100BL pH Probe KCl Storage Solution 100ml. carton of 6 by Bluelab

Bluelab® pH Probe KCl Storage Solution is the perfect solution to store and hydrate pH probes. pH probes are sensitive glass instruments which age through everyday use.

Bluelab® pH Probe KCl Storage Solution is made specifically for use with Bluelab® pH Probes and Pens. It is designed to increase response time and maximize the life of Bluelab® pH Pens and pH Probes. Add KCl solution to the cap of the pH pen/probe for storage after use and hydrate in KCl solution monthly. Instructions are on the label of the bottle.

Bluelab® pH Probe KCl Storage Solution is manufactured to high laboratory standards.

Note: Follow the manufacturer's instructions for use and care of your pH products.