All Products

GHS1015 Wallet Cards (50/Pkg) by GHS Safety

HazCom GHS Wallet Cards are a quick and easy reference to the new HazCom GHS pictograms and their meanings. One side of the card provides the complete set of HazCom GHS pictograms with a detailed description of each. The other side contains the list of information required to be found on an S. D. S. (Safety Data Sheet) as well as the images of the various Precautionary Statement Pictograms. Printed in full color to match the look of the HazCom GHS system requirements. Each card is 4-1/4" x 2-1/2" with rounded corners. Covered in a heavy lamination on both sides to provide long term durability in pockets or wallet. Sold in packages of 50.

SGC-DOCK-ETH Single Gas Clip Dock Ethernet by Gas Clip Technologies

Testing dock in portable case with gas compartment, regulator, gauge, charger & USB plus ethernet connection (for use with SGC & SGC PLUS)

72-5523RK-02 Eagle Portable Monitor for LEL/O2/H2S/CO2 (0 - 10,000 ppm)/NH3 by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

Enables 5 Gas-Pro units to be charges from a single wall outlet. Required 5 x CH0102 charging lead assemblies, supplied separately.

*Please note we can only ship RKI products to customers within the United States

MAB3-B8C112E-430 MultiRAE Lite Multi-Gas Detector w/ Pump, PGM-6208 - Variants: Configuration: O2 / LEL / CO / H2S / CO2 Wireless by RAE Systems

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications.

The MultiRAE Lite's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Over 25 interchangeable sensor options, including PID for VOCs, NDIR and catalytic for combustibles, and NDIR for CO₂
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Chemical
• Food and beverage
• Oil and gas (downstream)
• Pharmaceutical
• Telecommunications
• Wastewater treatment
• Fire overhaul

TT210SS Adhesive Vinyl Class 2.1 Flammable Gases Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

SPSTAXN1 Sensepoint Detector with Junction Box, 0-10ppm Nitrogen Dioxide by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

• Flammable, toxic and Oxygen versions available
• Suitable for indoor or outdoor use
• IP65 as standard

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX Certified

• Complies with the latest European standards
• Hazardous area and performance approvals
• Can be used for uncertified applications

Easy to Use

• Factory set operation
• Simple sensor replacement
• Minimal training required

Friendly Installation

• Universal junction box
• One box, three entries
• Metric and NPT compatibility
• Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

• Weather Housing (IP66)
• Flow adaptor
• Collecting cone

S011843 ASU Air Sampling Unit - for Xgard by Crowcon

The Air Sampling Unit (ASU) is designed to be used with Crowcon s Xgard range of detectors for monitoring potentially hazardous gases within ventilation ducts.

Features:

• Enables air ducts to be monitored without requiring the detector to be mounted within the duct.
• Avoid sensor drift due to air-flow effects.
• Simple, easy to install design.
• Simple detector maintenance: there is no need to access the duct for calibration purposes.
• Extremely reliable; ASU has no moving parts.

Part Number: 116L-484

5700-1601 GDA-1600 Sixteen Channel Alarm Controller with Display 19 inch Rack / Panel Mount (with bezel and hardware) by Bacharach

Bacharach's all new GDA-1600 Controller offers premier performance and functionality in a standalone controller. From one to sixteen channels, the GDA-1600 is designed to provide operators the most detailed, real time information about gas concentrations throughout the facility. Information is relayed to the operator through a large LCD display that shows real time gas concentrations, sensor location, sensor type, as well as historical data trends. Each channel has three independent, user-programmable alarm threshold values that allow for flexibility in alarm notification. When alarms do occur, operators are notified via LED alarm indicators on the front panel, clearly showing which channel is in alarm and the alarm state. Internal relays can also be utilized to control fans, horns, or beacons when alarm thresholds are exceeded. When responding to alarms, information is critical. The GDA-1600 provides more details than any other controller on the market today.

The GDA-1600 is equipped with a fault and three alarm levels per channel with features such as ON/OFF delays, latching relays and alarm acknowledge. A dedicated horn driver circuit for a local audible alarm is also standard. Two standard, 5-amp alarm relays are configurable via the "alarm voting" menu to make relays trip based upon various alarm combinations. If more relays are required optional relay boards can be added.

Real-Time clock and calendar are standard on the GDA-1600. Options such as 4-20 mA outputs and discrete relays are easily added. RS-485 (Modbus® RTU) or Ethernet (Modbus® TCP) ports are also available for flexibility in sending data to PC's, PLC's, DCS's, or other controllers. The GDA-1600 has complete calibration functionality for each input channel. This unique feature allows maintenance and service personnel to use the controller to calibrate the Bacharach GDX-150 simple sensor.

GDA-1600 Features & Benefits:

• Accepts up to 16 inputs, outputs and relays
• Graphic LCD for real time monitoring and 30-minute/24 hour data trends
• Complete calibration functionality for each input channel
• Three independent alarm levels per channel
• Non-volatile memory retains all configuration data

Part Number: 221L-393

*Please note we can only ship RKI products to customers within the United States