All Products

*Please note we can only ship RKI products to customers within the United States

Part Number: 44L-481

*Please note we can only ship RKI products to customers within the United States

MW102 Standard Portable pH / Temperature Meter by Milwaukee

Standard portable meters with no frills! Milwaukee's low cost durable meters for quick and reliable measurements.

Milwaukee's Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.

MW102 is a microprocessor based pH/Temperature meter with extended range (-2.00 to 16.00 pH), Automatic Temperature Compensation, automatic calibration in 2 points and ±0.02 pH accuracy. The meter is supplied with pH electrode and calibration solutions.

*Please note we can only ship RKI products to customers within the United States

MC1K Handheld Radiation Alert Detector by SE International

The new ergonomic MC1K is a handheld survey meter using a built-in energy compensated GM detector. It detects gamma and x-rays up to 1000 mR/hr over 4 selectable ranges. A beep sounds and a count light flashes with each event detected.

72-6JXX-C GX-6000 Six Sensor Sample Draw Gas Monitor, H2S, with Li-ion Battery Pack / 100-240 VAC Charger by RKI Instruments

Simply put, the GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Features

• Monitor up to 6 gases
• 2 smart sensor slots auto recognize PID, IR, and super toxic sensors
• 5 Operating modes: normal, leak check, inert, snap log and bar hole
• Library of over 600 VOCs
• PPM Leak Check mode
• Man-down and panic alarms
• Auto display rotation
• LED Light source
• Internal sample pump
• Glove friendly glow in the dark buttons
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs Li-ion / alkaline
• Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours
• Field replaceable sensors, batteries and filters

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

CES-EX-LN-02P-50B Explosion Proof LED Linear Light, 50W by Global Green

With high lumen flux up to 140lm/W, material 6063+ADC12 (spray paint), PC is V-0 Flame retardant, F1- UV-Resistant,excellent anti-corrosion performance for marine, suitable for salt water and corrosive environment. Anti-Glare - micro optics Reduces direct visual contact with the light source. 6J Shock and vibration resistant. Mounting optional and Emergency optional. High quality, competitive price and long lifespan it's really perfect for hazardous location lighting.

Features

• Patent designed for explosion-proof protection performance. Aluminum alloy body, maximize the best heat transmit
• PC cover, excellent anti-corrosion performance shock & vibration resistant, Anti-glare, >90%light transmit.
• Perfect to replace the traditional explosion-proof fluorescent light lamp shape.
• LED: LM80 certified,120-140Im/W, up to 9600 lumen flux.
• High Efficiency LED driver, more than 50000 hours lifespan.
• Circuit design: 4KV/6KV Surge Protection power supply.
• Protection: IP66, high protection grade for waterproof and dust-proof.

Application

• Oil & Gas Exploration
• Loading Docks Platforms
• Oil Refinery
• Petrochemical Plant
• Power Plant
• Pharmaceutical Plant
• Heavy Industrial Storage Facility
• Paper mills
• Wastewater Treatment Plants
• Shipyards

AI2910 CalPod Solution Organizer by Apera

The Apera Instruments' unique CalPod helps users organize all the solutions in one place and create no more mess in the calibration process. The CalPod can hold up to 4 types of different solutions simultaneously. The hole in the center of the CalPod is for users to place the electrode. This CalPod is a great accessory for pH meters and all other kinds of meters that require regular calibration.

After calibration, close the lids so the solutions can be used multiple times.

Stickers for commonly used solutions for pH and conductivity testing are included. Blank stickers are provided for users to write special solutions' names.

• Say goodbye to all the mess during calibrations
• Simply organizing all calibration solutions into one place for multiple uses
• Label Stickers included in the kit
• Easy to rinse off

Part Number: 221L-303

Part Number: 34L-80-100

3811-200 EC 38 Fixed Transmitter with Ammonia (NH₃) Sensor, 2 ppm Resolution, 0 - 200 ppm Range by GfG

The EC 38 transmitter uses advanced technology for the detection of toxic gases and oxygen levels. It is available in the standard version with horn strobe or with a stack light. This monitor has a NEMA 4X enclosure that makes the EC 38 suitable for the harshest environments.

Simple and effective

Once you power up the units, they will accurately display values on the large LCD and transmit a linear 4-20 mA signal to a GfG controller. Autocal® automatic calibration and maintenance is done effortlessly through push buttons. Smart sensors allow the user to easily change ranges or gas types in the field without a need for additional programming.

• Advanced transmitter for oxygen and a wide selection of toxic gases
• 24 VDC
• Available with stack light or standard version with horn strobe
• AutoCal® automatic calibration
• Alarm relays standard (low, high and fault)
• Linear 4-20 mA output signal
• NEMA 4X housing

G222E-0207 G222E Dual sensor configuration - Hydrogen sulfide (H2S) (100 ppm) and 2-year Oxygen (O2) - Instrument Only by GfG

Sturdy and compact dual gas detector for monitoring toxic gases, H2 and O2

The G222E is the first device in GfG s Micro 5 series. At present, it is the smallest and at the same time one of the lightest one- to two-gas detectors with two electrochemical gas sensors (EC) in the world.

Safety through quality and functionality

Equipped with high-quality, precise and durable sensors, the system is individually tailored to your requirements. Currently, sensors are available for 20 different gases and a wide array of measuring ranges. Combine them according to your requirements or increase the safety of your employees even further by redundant use of the same sensors to minimize the danger from a specific gas.

A simple, two-button menu and a large, easy-to-read display provide easy menu navigation and reliable information even under difficult conditions.

Suitable for long periods of use

Depending on sensor equipment and configuration, the G222E has an average operating time of up to 9 months at 10 hours per working day or 90 days in 24/7 operation. The battery of the G222E can be changed in seconds if necessary and the gas detector is ready for use again.

Data logger

The internal data logger stores the last 2600 events. These include measured values, alarms, TWA and STEL values, and time as well as temperature information.

Calibration Cap & Smart Cap

Calibration and adjustment of the G222E are quite simple. All you need is the Calibration Cap for manual zero and test gas application.

If you want to read out the content of the data logger, you will need the Smart Cap, a USB connection cable and the Config Software for the G222 series instead.

400563 6352 635-2 Compact Pro Dewpoint (HPD) Kit by Testo

The instrument for measuring air moisture, material equilibrium moisture and pressure dewpoint in compressed air systems. Moisture characteristics can be recorded in the instrument memory and analysed and displayed in graphics or tables. Up to 3 temperature or humidity probes can be displayed in the testo 635-2 meter; data transmission is by radio i.e. wireless. Selectable user profiles, i.e. allocation of specific function buttons and menu-guide to an application enable intuitive operation. Material moisture can be displayed immediately on account of the special probe. Characteristics for different materials can be stored in ComSoft and transmitted to the instrument. testo 635 immediately displays the dewpoint difference between ambient air and the wall surface in the analysis of moisture on walls and ceilings. Precision probes up to -60°C tpd are available to check pressure dewpoint in compressed air systems. The humdity sensor developed by Testo has proven itself worldwide and has outstanding features in terms of precision, long-term stability, temperature resistance and robustness.

Kit Includes:

• 0563 6352 - 635-2 with memory & software
• 0636 9836 - Precision Press Dewpoint Probe
• 0516 0435 - Deluxe service case for Compact Pro

• Instrument memory for up to 10,000 readings
• PC software for analysis, filing and documentation of measurement data
• Measurement of air moisture, material equilibrium moisture, pressure dew point
• Radio probe for temperature and humidity
• Protection class IP54
• Direct display of material moisture due to freely settable characteristics curves (based on equilibrium humidity)
• Storage of single measurements or measurement series by measurement location
• Fast access to the most important functions via user profiles
• U-value probe connection option

MBB3-A1C112E-02M MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Non-Wireless / Accessories Kit / Confined Space and Calibration (4-gas + Iso) Kits by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs