$750 - $1000

9506P Adjustable Hardwood Plank, Heavy Duty, 6' to 9.5' Long, 500 lb Rating by Pelsue

Manhole scaffold planks are constructed from strong hardwood with heavyduty, steel hardware and bolt through construction. Safety latches are included on expandable units at both ends to prevent accidental opening.

DSS-C1 Flush Floor Mount Sleeve for Fresh Pour Concrete, Stainless Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Flush Floor Mounted

Placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern. Please contact Pelsue for specific installation requirements.

DSS-F1 Floor Mounted Baseplate/Sleeve, Stainless Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Floor Mounted

The floor mount is anchored by bolts, or it welds to a variety of surfaces such as floors, truck beds, catwalks, etc. Contact Pelsue for specific installation requirements.

DSS-F2 Floor Mounted Center Baseplate/Sleeve, Stainless Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Floor Mounted

The floor mount is anchored by bolts, or it welds to a variety of surfaces such as floors, truck beds, catwalks, etc. Contact Pelsue for specific installation requirements.

DSS-F3 Flush Floor Mount Sleeve for Existing Concrete, Stainless Steel by Pelsue

Permanent Mount Sleeves

• Available in electroless nickel plated steel, zinc plated, galvanized or stainless steel
• ABS liners with PVC slip plates
• Accepts up to 48" offset masts
• Sleeve is always on site
• Inside sleeve diameter 3.0680"
• Liners and sleeves are replaceable
• Allows masts to pivot 360°
• Drain holes eliminate water buildup
• Friction bearing is replaceable

Flush Floor Mounted

Placed in fresh concrete, this sleeve mounts flush with the floor and is great for high traffic areas where trip hazards are a concern. Please contact Pelsue for specific installation requirements.

DSS-W1 Wall Mounted Plate/Sleeve, Stainless Steel by Pelsue

The wall mount is anchored by bolts or welds to truck bumpers, tank walls, sides of catwalks, meter pits, clarifiers, etc. Please contact Pelsue for specific installation requirements.

PM-4010 Dewatering Pump, 1/2 HP, 120V AC, 9.6 Amp, 2" Discharge, 90 GPM, Submersible by Pelsue

Looking for submersible pumps? Try Pelsues most popular and affordable range of submersible pumps. As always Pelsue preinstalls the coupling and includes rope for raising and lowering for every pump.

PSRL1125-SS Self Retracting Lifeline with 25ft SS Cable and Carabiner by Pelsue

Three-way recovery units & Self Retracting Lifelines are designed for use by construction workers, utilty personnel, & maintenance repair employees needing on-the-job fall protection. The stopping distance for all models is less than 2'. These units are also used in confined spaces such as manholes, tanks, vaults, and other confined areas, where fall-arrest and retrieval rescue are extremely important.

As a general rule, OSHA requires the use of fall protection for anyone working six or more feet above the base level of any work area (OSHA 1926.501).

When entering a confined space by ladder or other fixed structure, or while being lowered mechanically by a man-rated winch, a worker must be attached to an independent lifeline for adequate fall protection.

Self Retracting Lifelines will only arrest a fall, they do not provide retrieval capabilities. The three-way recovery unit can be used for fall protection as well as retrieval if an emergency should occur.

Can be mounted to the Davit Retrieval System or Tripod.

Under no circumstances shall the three-way be used for routine raising and lowering (use a man-rated PH series hoist for raising and lowering).

Features

• Arrest Distance within 2 feet
• Stress indicator to warn user that unit has arrested a fall
• 3/16" galvanized steel cable, stainless steel cable, Technora rope, or Webbing
• Cable Length: 25-65 ft. Webbing Length: 20-30 ft.
• Internal components made of bronze, stainless steel and aluminum
• Cast Aluminum housing protected with zinc plating
• Working Load: 310 lbs.
• Self-retracting lifelines require a carabiner for attachment to anchorage.

PSRL1125-TR Self Retracting Lifeline with 25ft Technora Rope and Carabiner by Pelsue

Three-way recovery units & Self Retracting Lifelines are designed for use by construction workers, utilty personnel, & maintenance repair employees needing on-the-job fall protection. The stopping distance for all models is less than 2'. These units are also used in confined spaces such as manholes, tanks, vaults, and other confined areas, where fall-arrest and retrieval rescue are extremely important.

As a general rule, OSHA requires the use of fall protection for anyone working six or more feet above the base level of any work area (OSHA 1926.501).

When entering a confined space by ladder or other fixed structure, or while being lowered mechanically by a man-rated winch, a worker must be attached to an independent lifeline for adequate fall protection.

Self Retracting Lifelines will only arrest a fall, they do not provide retrieval capabilities. The three-way recovery unit can be used for fall protection as well as retrieval if an emergency should occur.

Can be mounted to the Davit Retrieval System or Tripod.

Under no circumstances shall the three-way be used for routine raising and lowering (use a man-rated PH series hoist for raising and lowering).

Features

• Arrest Distance within 2 feet
• Stress indicator to warn user that unit has arrested a fall
• 3/16" galvanized steel cable, stainless steel cable, Technora rope, or Webbing
• Cable Length: 25-65 ft. Webbing Length: 20-30 ft.
• Internal components made of bronze, stainless steel and aluminum
• Cast Aluminum housing protected with zinc plating
• Working Load: 310 lbs.
• Self-retracting lifelines require a carabiner for attachment to anchorage.