$750 - $1000

SPSTAXO1 Sensepoint Detector with Junction Box, 0-25%v/v Oxygen by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offers users a cost-effective solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction box, this detector can be installed using conduit or armoured cable and glands depending on the specific needs of the application.

Sensepoint flammable and toxic gas detectors are designed for use in potentially explosive atmospheres, and allow for easy access to terminals via the hinged lid of the junction box. Installation should follow national guidelines using suitably approved armoured cable and glands or conduit.

Supplied with an earth continuity plate for increased resistance to the effects of RFI, the junction box offers the installer a choice of 1/2", 3/4" and M20 connection via conduit or armoured cable and Ex e certified cable glands. Terminals are suitable for use with screened 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length.

Sensepoint flammable, toxic and Oxygen gas detectors are designed for direct connection with the Honeywell Analytics' range of Touchpoint controllers.

One-Stop Shop

• Flammable, toxic and Oxygen versions available
• Suitable for indoor or outdoor use
• IP65 as standard

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX Certified

• Complies with the latest European standards
• Hazardous area and performance approvals
• Can be used for uncertified applications

Easy to Use

• Factory set operation
• Simple sensor replacement
• Minimal training required

Friendly Installation

• Universal junction box
• One box, three entries
• Metric and NPT compatibility
• Includes earth continuity plate for enhanced protection against RFI

Range of Accessories

• Weather Housing (IP66)
• Flow adaptor
• Collecting cone

TOC-635-PLUS controller / 32 device capability by IGD

Pioneering Technology

State-of-the-art addressable gas detection in one compact package. The TOC-635 Control Panel is the central hub of your addressable gas detection system and the interface through which you can control your entire setup. Equipped with Sentinel+™ digital communication software and 2-Wire Addressable technology, IGDs advanced gas detection system is designed to provide fast, efficient, accurate performance to protect personnel and plant against gas hazards.

Our Detectably Better system utilises a 2-core polarity-independent cable helping to reduce system costs and offering unparalleled flexibility, accommodating up to 8 (Micro) or 99 (Plus) additional devices linked in series. Link alarms, interface with plant shutdown hardware, and communicate clearly with BMS and similar systems.

Complete Control

The Plus offers all the same features as the Micro while also boasting 2 digital inputs and built-in Wi-Fi allowing you to download system reports and perform system servicing. Optional cloud-based data acquisition enables the remote monitoring of your system's status in real-time from any laptop, mobile phone, or tablet and supports email & text-based alarm notifications. Both models accommodate integration into 3rd party systems such as BMS and fire management systems. The Plus also boasts BACnet/Modbus compatibility. The 2×8 RGB display allows for intuitive interfacing and clear audible and visual alarms. The TOC-635 features assignable LEDs, 1-Click auto-setup and Jog-Wheel interfacing offering complete control and total peace of mind.

Advanced 2-Wire Addressable Gas Detection

2-Wire Addressable technology combines with our Sentinel+™ digital communication software, to provide an advanced addressable gas detection system designed to offer fast, efficient, and error-free performance. The 2-Wire Addressable system also allows you to link multiple detectors in series on our 2-Core cable providing unparalleled versatility and huge savings on installation and allowing for seamless integration into your setup.

Key features include:

• Auto-find
• Auto-configure
• Auto-update
• Downloadable status reports

Sentinel+™ accommodates interfacing with your safety systems, communication with all hardware and BMS and the addition of alarms, and other external devices. Our 2-Wire Addressable solutions have no polarity requirements, which means we can minimise cabling and system costs without compromising on safety.

Installation Cables

• Supported installation cables 2 core 1.5mmSQ or 2.5mmSQ
• Typically SWA, MICC, SY, CY Screened or similar

VP5-00031100216 Ventis Pro5 Personal Gas Monitor, O2, Li-ion Battery, Desktop Charger, No Pump, Black, ATEx/IECEx, LENS Wireless, Dutch by Industrial Scientific

Detect up to five gases simultaneously with the rugged, wireless, Ventis® Pro5 Multi-Gas Monitor. With Ventis Pro5, safety goes beyond the gas detector whether you need team-based alarm sharing, remote monitoring with location details, or both. The monitor is also backed by a Guaranteed for Life™ warranty.

• Eliminate the need for two pieces of equipment by using Ventis Pro5 for personal monitoring and confined space entry.
• Train workers on one, multi-purpose gas monitor and reduce the risk and investment of having different devices in the field.
• Improve team and site safety by locally sharing alarms and gas readings between wirelessly connected Ventis Pro5 monitors.
• Get real-time location and alarm data directly from Ventis Pro5 gas monitors to a designated safety contact with the optional cellular or wi-fi battery pack.
• Reinforce safe behavior with programmable alarm action messages like "EVACUATE" or "VENTILATE" based on alarm level.
• Simplify the user experience with the ability to hide unnecessary screens based on user needs, role, industry, or site.

VP5-00031101117 Ventis Pro Series, O2, Li-ion, Desktop Charger, Orange, UL/CSA, LENS™ Wireless, Portuguese by Industrial Scientific

Detect up to five gases simultaneously with the rugged, wireless, Ventis® Pro5 Multi-Gas Monitor. With Ventis Pro5, safety goes beyond the gas detector whether you need team-based alarm sharing, remote monitoring with location details, or both. The monitor is also backed by a Guaranteed for Life™ warranty.

• Eliminate the need for two pieces of equipment by using Ventis Pro5 for personal monitoring and confined space entry.
• Train workers on one, multi-purpose gas monitor and reduce the risk and investment of having different devices in the field.
• Improve team and site safety by locally sharing alarms and gas readings between wirelessly connected Ventis Pro5 monitors.
• Get real-time location and alarm data directly from Ventis Pro5 gas monitors to a designated safety contact with the optional cellular or wi-fi battery pack.
• Reinforce safe behavior with programmable alarm action messages like "EVACUATE" or "VENTILATE" based on alarm level.
• Simplify the user experience with the ability to hide unnecessary screens based on user needs, role, industry, or site.

VP5-00032001411 Ventis Pro Series, O2, Li-ion Ext Range, Orange, ANZEx, LENS™ Wireless, English by Industrial Scientific

Detect up to five gases simultaneously with the rugged, wireless, Ventis® Pro5 Multi-Gas Monitor. With Ventis Pro5, safety goes beyond the gas detector whether you need team-based alarm sharing, remote monitoring with location details, or both. The monitor is also backed by a Guaranteed for Life™ warranty.

• Eliminate the need for two pieces of equipment by using Ventis Pro5 for personal monitoring and confined space entry.
• Train workers on one, multi-purpose gas monitor and reduce the risk and investment of having different devices in the field.
• Improve team and site safety by locally sharing alarms and gas readings between wirelessly connected Ventis Pro5 monitors.
• Get real-time location and alarm data directly from Ventis Pro5 gas monitors to a designated safety contact with the optional cellular or wi-fi battery pack.
• Reinforce safe behavior with programmable alarm action messages like "EVACUATE" or "VENTILATE" based on alarm level.
• Simplify the user experience with the ability to hide unnecessary screens based on user needs, role, industry, or site.

VTS-L0232101202 Ventis MX4 Multi-Gas Monitor, LEL (CH4), H2S, O2, Li-ion Ext Range, Desktop Charger, Without Pump, Orange, ATEX/IECEX, French by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

VTS-L1031000201 Ventis MX4 Multi-Gas Monitor, LEL (CH4), CO, O2, Li-ion, No Charger, Without Pump, Black, ATEX/IECEX, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

VTS-L1031001101 Ventis MX4 Multi-Gas Monitor, LEL (CH4), CO, O2, Li-ion, No Charger, Without Pump, Orange, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

VTS-L1231001202 Ventis MX4 Multi-Gas Monitor, LEL (CH4), CO, H2S, O2, Li-ion, No Charger, Without Pump, Orange, ATEX/IECEX, French by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

VTS-L1231100207 Ventis MX4 Multi-Gas Monitor, LEL (CH4), CO, H2S, O2, Li-ion, Desktop Charger, Without Pump, Black, ATEX/IECEX, Portuguese by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

*Please note we can only ship RKI products to customers within the United States

SST4-MINI-X3OSH-Y SST4 Portable Multi Gas Detector, Mini LEL NDIR/O2/SO2/H2S by WatchGas

The SST4 Micro and SST4 Mini are four-gas devices designed with simplicity, size, and the user in mind. From use in the hot temperatures of the steel industry or Hazmat users to the extreme environments in the Oil and Gas industry. With a wide range of user options, the SST4 can be tailored for many use cases and applications.

As many industries move from single gas to a multigas approach, it is essential for end-user adoption. The SST4 Range is designed with simplicity, size, and with the user in mind. With its compact yet rugged design, the SST4 is there when needed. From use in the hot temperatures of the steel industry or Hazmat users to the extreme environments in the Oil and Gas industry. With a wide range of user options, the SST4 can be tailored for many use cases and applications. The device can be set up simply by using the WatchGas SST application, calibration, and bump test records. With Compliance Check, it has never been easier to manage, maintain, and ensure maximum uptime of your fleet of devices.

Applications

• Oil and gas upstream
• First responders
• Steel production
• Manufacturing
• Wastewater
• Shipping
• Ship building
• Power generation
• Shipping
• Power generation
• Telecommunications

Features and Benefits

• Display: With the largest LCD in its category the SST4 display ensures information is displayed clearly and allows users to make quick decisions. Four gases can be displayed with clarity and shown in PPM, %vol, mg/m3 and %LEL. Correction factors can be set through the WatchGas SST Application and allows for a one to one reading for the target gas required. With its Backlight it can be used in dark environments and will be illuminated in an alarm occasion.
• NFC: Near Field Communication built in as standard and allows for a wide range of solutions depending on your needs. Simply pair SST4 with the WatchGas SST Application to manage your fleet, bump, calibrate, assign, or download event logs and data logs.
• Wireless Charging: In dirty and harsh environments that gas detectors are often used in many charging connectors become damaged. SST4 has been designed with induction charging allowing for simple and quick charging with no risk of cables and ports becoming damaged and failing. A complete charge cycle takes 2-3 hours. Different charging accessories are available within the portfolio.
• Sensor: Using the latest in Solid State Technology our H2S, CO, O2 and SO2 offer stability and reliability over extreme temperatures and conditions. Toxic sensors have a smaller form factor and with the removal of liquid electrolyte provides a long-lasting sensor. A choice of 3 different LEL sensors allows the buyer to tailor the device to your application and allows longer runtimes compared to conventional technology.
• Alert: As a safety device it is essential that the device clearly notifies users of the presence of gas. The SST4 has a 95dB alarm at 30 centimetres which is the industry standard and is required in loud industrial environments. High, HighHigh, Low, LowLow, TWA and STEL alarms can be configured by the user and updated directly on the device through the SST Dock or WatchGas SST Application.
• Rugged: Designed with the harshest environments in mind the SST4 offers an IP rating of 65-68. The casing is a double shot housing that gives extra robustness while not compromising on quality. The screen protectors located either side of the display protect the LCD from scratching.

CS700-C-1-CC-3-A-5-B CS700 High Performance Stainless Steel Contacting Conductivity Sensor, K=1.0, TC, 10Ft, TL, 3/4" NPT by Sensorex

The CS700 High Performance Contacting Conductivity Sensor is ideally suited for ultrapure/pure water, drinking water, and lower-conductivity drinking water applications. It's durable in high-temperature (150° C / 302° F) and high-pressure environments (1,379 kpa / 200 psig), thanks to stainless steel and teflon construction. In addition, quick installation is made possible via using compression fitting with 3/4" or 1/2" threads. Pick from three cell constants based on your application: 0.01, 0.1 (available soon) and 1.0 (available soon).

High Accuracy and Repeatability

• Accuracy is 2% of reading with 1% repeatability
• Electro-polish finish provides excellent stability and consistency

Multiple Cell Constants Cover Wide Range of Applications

• 0.01/cm for ultra-pure/pure water
• 0.1/cm for pure and drinking water
• 1.0/cm for wastewater and process water

Durable in High-Temperature and High-Pressure Environments

• Built from 316 Stainless Steel and Teflon
• Withstands up to 150° C (302° F) and 1379 KPA (200 PSIG)