$750 - $1000

WS200 Portable Fluoride/pH/Cond. Meter Kit by Apera

The WS200 Fluoride/pH/Conductivity 7-in-1 Portable Meter Kit is designed for accurate and reliable measurement of fluoride, pH, conductivity, salinity, TDS, resistivity, ORP (ORP probe sold separately), and temperature altogether. The patented 3-in-1 Fluoride Ion probe is composed of an ion electrode, a reference electrode, and a temperature electrode, generating reliable readings with stable potential and fast response rate. Range: 0.02 ppm to 1900 ppm; Accuracy: ±0.02 ppm, or ±5% of reading (whichever is greater).

Intelligent Functions -- 2-point automatic calibration (0.19mg/L, 19.0 mg/L) for fluoride; 3-point automatic calibration for pH (4.00, 7.00, 10.01 pH) and 1-point calibration for conductivity; 800 groups of data storage (measurements, temperature, units of measurements); auto. power-off; backlight adjustment; Self-Diagnosis; Fluoride units switchable from mg/L, ppm, ppt, and pF. Convenient Use -- There is no need for probe stirring or added reagents during tests. You can directly measure your sample solutions' fluoride ion concentration just like pH test (only takes 10 minutes to activate the fluoride probe before tests).

Rugged portable design with IP57 water resistant rating covered with a silicon case, which gives you a firm grip. Ideal for both lab and field use.

What's in the kit - W2100 Meter*1, F501 3-in-1 Fluoride Probe*1, 201T-S Combination pH Electrode (ATC), 2301T-S Conductivity Probe (ATC), Fluoride Ion calibration solutions (0.19mg/L and 19.00mg/L, 50ml for each), pH calibration solutions (pH4.00, pH7.00, pH10.1, 50ml, one for each), conductivity calibration solution (1413μS/cm, 50ml), screw driver*1, back up batteries*3, instruction manual, and a portable case.

• Patented 3-in-1 fluoride ion probe - no need for stirring or added reagents, directly measuring the ion concentration of fluoride in a quick and simple manner
• Stable potential, fast response rate, convenient use; 2-point auto. Calibration for fluoride
• Equipped with an atc ph and conductivity electrode, testing fluoride, ph, ec, tds, salinity, resistivity, orp (orp probe sold separately) & temperature altogether with high accuracy
• Large backlit screen, 800 groups of data storage, self-diagnosis, parameter setup
• Rugged portable design, suitable for both lab and field test; 800 groups of data storage

AQF100 3M Clean-Trace Free ATP Water Pens, 100 pack by AquaPhoenix

Water hygiene test to measure free ATP in a sample. 100/case

Real-time ATP water hygiene test which gives an objective indication of cleanliness in CIP water samples in seconds. A dedicated ATP water test that is designed to prevent sampling inaccuracy inherent in collecting a water sample with a swab. Its overall simplicity makes it a powerful addition to your hygiene program. Results measured in the 3M™ Clean-Trace™ NG Luminometer and provided in Relative Light units (RLU).

AQT200 3M Clean-Trace Total ATP Water Plus Pens, 100 pack by AquaPhoenix

The test is designed to rapidly assess equipment sanitation processes and the efficiency of Clean In Place (CIP) procedures by the improved more accurate detection of organic contamination from microbial or product residues. The test gives an objective indication of cleanliness in water samples in seconds.

Designed for use with the 3M™ Clean-Trace™ NG Luminometer, the new AQT200 formulation now provides the ability to gain more consistent and reliable results providing greater confidence in your hygiene monitoring procedures. The new improved formulation also provides the flexibility to store AQT200 at your own convenience - room temperature for up to 2 months or refrigerated for up to 12 months. 100/case.

AgrowDose™ AD4 Quad Peristaltic Dosing Pump by Agrowtek

AgrowDose™ AD dosing pumps are rugged and economical single, dual or quad-head peristaltic pumps designed for injecting nutrient solutions, pH buffers and more into stock tanks or pressurized water lines up to 25psi when controlled by Agrowtek's GC-Pro/XL series cultivation control systems.

Pump heads feature an inlet suction tube and an outlet pressure tube. Simply place the inlet side into any size nutrient or buffer stock tank and route the outlet to the reservoir or use our PBX series manifolds to dose into a recirculating and monitoring loop. Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

AgrowDose™ pump motors operate independently at a fixed speed (~50mL/min) when the 24V discrete inputs are activated by a controller's outputs such as the GC-Pro or GC-ProXL. Built-in relays on the AD2 and AD4 pumps switch power from the included wall adapter to operate the pump motors. (AD1 does not have control a relay built into pump.)

Quick-change pump head offers fast, easy maintenance when tubing wears out.

• 120Vac/12Vdc Power adapter included for motors
• 1/4" OD x 3/16" ID FDA Tubing
• ~50mL/min per pump

Applications

• Greenhouses & Growing Facilities Hydroponics pH Control
• Agricultural & Aquaponics
• Aquarium
• Pool & Spa
• Analytical, Research & Academic
• Industrial Process Water, General Purpose

AgrowDose™ AD4i Quad Intelligent Dosing Pump by Agrowtek

AgrowDose AD4 "quad" peristaltic dosing pump with four independent pump heads for injecting nutrient solutions, pH buffers, chlorine, chemicals, food and beverage mixing, and more. Pump precise volumes of liquids at variable flow rates into reservoirs or pressurized lines (up to 25psi.)

AgrowDose pumps connect instantly to Agrowtek's intelligent SXH and PHX dosing controllers through the GrowNET™ port for advanced automated dosing functions. Use stand-alone with the LX1 USB AgrowLINK for PC batch dosing, or the LX2 ModLINK for MODBUS.

Pumps can draw solutions up to 10ft vertical lift and do not require priming. Peristaltic action resists fouling or clogging even with thick fluids.

Features

• Four independent dosing pumps
• Precision dosing accuracy < 1mL: Variable speed, reversable
• 12V DC input power: 120V Wall adapter included
• Easy-change pump heads: Twist & replace; no tools required
• 1-Year Warranty
• WiFi optional
• GrowNET™ Digital Communication Port
• MODBUS RTU for industrial PLC control: Independent variable speeds, reversable
• Durable powder-coated steel enclosure
• Made in USA

AgrowTouch™ Color Touch Screen for GC-Pro by Agrowtek

AgrowTouch 3.5" color touch screen interface for the GrowControlTM GC-Pro and GC-Plus climate controllers. These industrial grade touch screens are lighting fast and offer the ultimate in convenience for monitoring and managing your controller.

Get instant access to all controller functions including:

• Manual overrides for all outputs and inputs
• Manually turn system on or off
• Full control of all settings
• Visual trend graph for all sensor readings
• Alarm history for the last 10 alarms

Also includes:

• Administrator and user lock-out and password protection
• Screen saver which turns off back light after 30 minutes

Specifications

• 4" Display
• 256 Colors
• For GC-Pro or GC-Plus
• 1 Year Warranty, Made in USA

GrowControl™ MPX1 Mini Dosing System (single pump) by Agrowtek

GrowControl MPX Mini Dosing System automates pH dosing by combining Agrowtek's digital PHX pH controller with AgrowDose precision dosing pumps. MPX+ model includes ORP. Each pump can be configured independently.

PHX dosing controller with lcd display allows advanced configuration of the pumps and dosing parameters, manual pump priming, as well as graphing, alarms, data logging and more.

AgrowTouch™ Color Touch Screen for GC-ProXL by Agrowtek

AgrowTouch 3.5" color touch screen interface for the GrowControlTM GC-Pro and GC-Plus climate controllers. These industrial grade touch screens are lighting fast and offer the ultimate in convenience for monitoring and managing your controller.

Get instant access to all controller functions including:

• Manual overrides for all outputs and inputs
• Manually turn system on or off
• Full control of all settings
• Visual trend graph for all sensor readings
• Alarm history for the last 10 alarms

Also includes:

• Administrator and user lock-out and password protection
• Screen saver which turns off back light after 30 minutes

Specifications

• 4" Display
• 256 Colors
• For GC-Pro or GC-Plus
• 1 Year Warranty, Made in USA

CONTPHCON pH Controller Connect by Bluelab

24/7 data logging and visibility of your reservior pH levels wherever you are.

All the same features as the Bluelab® pH Controller, with added benefits of Bluelab® Connect™ Software.

Automatic measuring and adjusting to preset pH levels with alarms. Wireless data logging to your computer and mobile app via the Bluelab® Connect™ Stick, provides continuous information at your fingertips. Use the data collected to make changes faster for a thriving crop.

Probe cable length: 2 meters / 6.5 feet

Features

• Automatic control of pH level in systems with reservoirs up to 200 gal. / 760L
• Dose either pH up or pH down adjusters
• Remote viewing with Bluelab® Connect™ Software and Apps
• Plant-safe green backlit LCD with adjustable brightness
• Large, easy to read display
• Easy to navigate menu to adjust settings
• Simple push button pH calibration
• Flashing high and low alarms with control lockouts
• Water resistant, wall mount design
• Seperate Bluelab® Temperature Probe (for pH ATC)
• Replaceable double junction pH probe & peristaltic pump

BWC4-B-A BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, Australian version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-A

BWC4-B-B BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, Brazilian version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-B

BWC4-B-C BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, Chinese/New Zealand version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-C

BWC4-B-R BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, Russian version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-R

BWC4-B-U BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Black Housing, United Kingdom version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-B-U

BWC4-Y-A BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Yellow Housing, Australian version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-Y-A

BWC4-Y-B BW Clip4 4-Gas Detector (O2, LEL, H2S, CO) - Yellow Housing, Brazilian version by BW Technologies

Honeywell BW™ Clip4 Multi-Gas Detector. It's ON.

The simplicity of "always on." The safety and quality of Honeywell.

When you've got your hands full in the field, you need no hassle gas detection you can count on: the Honeywell BW™ Clip4 four-gas detector. Wearable, easy multi-gas detection that's always on. No charging, no battery or sensor replacements, no hassle. Simpler, low cost of ownership guaranteed by the Honeywell commitment to quality, and backed by a full ecosystem of supporting technologies. When you clip on the Honeywell BW™ Clip4 you know - it's on.

Always On: 2-Year Continuous Runtime

Once activated, you can rest assured that the Honeywell BW™ Clip4 is always on. Two years of non-stop runtime with no charging or battery swap outs.

Easy to Wear

• Durable, ergonomic and wearable - doesn't weigh you down
• Compact profile - even working in tight spaces, you won't know you are wearing it

Easy to Use

• Simple one-button operation
• User-friendly tamper-proof operation with just one button
• Intuitive LCD icons
• Real-time gas concentrations shown on LCD

Easy Compliance

• Flashing red non-compliance indicators warn workers that the detector has not been bump tested according to schedule
• Daily full function self-test of sensors, battery status, circuit integrity, and audible/visual alarms

Easy to Manage

• Compatible with IntelliDoX docking system and instrument management system

Easy to Rely On

• Built-in concussion proof boot
• Tested to last in extreme environments

Part Number: BWC4-Y-B