$75 - $100

Powerful directional magnet to put Tetra 3 into gas test or calibration mode.

TK3520-Z Sulfite Test Kits (all liquid reagents) 1 drop = 2 or 10 ppm as Na2SO3 by AquaPhoenix

EndPoint ID Drop Count Test Kit, Sulfite

1 drop = 2 or 10 ppm as Na2SO3 / 25 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

H-10-101-01 Benzene Colorimetric Gas Detection Tube, 0.5 - 10 ppmv Selective (5 Colorimetric Tubes and 5 Pre-Tubes) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

Part Number: H10162000PA

SCT-108.002.68 SCT VAND Infrared Thermometer (High Performance 12:1) by ScichemTech

Includes:

• 9V DC Battery
• Instruction Manual
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements.
• New series includes high performance, general purpose.
• Temperature range -32°C to 535°C.
• Fixed emissivity @ 0.95.
• Ultra low power consumption in shut down mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• High DS ratio.
• Backlight LCD display.
• Option to select °C/°F
• Electronic trigger lock.
• Temperature data storage.
• Audible alarms.
• Battery operated.

Small Shutter Retrofit Kit

VTB-PC-002 Particle Counter Plug-in Tool for Video ToolBox by Zarbeco

Particle Analyzer™ is a software program which can count the number of particles in an image from a microscope or video inspection system. Turn on Particle Analyzer and the software does the rest.

Use to count color images or particles in your object and then get a count of them on the screen. Segregate them by color or size.

Particle Analyzer is available as a plug-in to Video ToolBox or Video ToolBox PRO, the video display, capture and annotation software from Zarbeco, LLC (Video ToolBox or Video ToolBox PRO not included).

Features

• Counts particles in image by number or color

Computer Requirements

• Video ToolBox or Video ToolBox PRO imaging software (not included)

Suggested Products

• ZDM Series Portable Digital Microscope System
• MISC-MP products
• MISC products

98767-58 Traceable Ultra™ Refrigerator/Freezer Thermometer with Calibration; 1 Bottle and 1 Bullet Probe by Digi-Sense

Accurately monitor temperatures in refrigerators, freezers, water baths, and incubators. Thermometers have accuracy of ±0.5°C (-30 to 50°C). Built-in audible and visual alarms activate when temperature rises or falls below the alarm set point, and is programmable in 0.1° increments.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer comes with bottle and Bullet probes. Bottle probe is filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door. Use Bullet probe to measure air and liquid temperatures. Bullet probe sensor and cable may be completely immersed. Sensor measures 3/4"L x 0.187" dia.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Triple display simultaneously shows MIN/MAX and current temperature|10-ft microcable allows refrigerator/freezer doors to close on it
• Temperature-buffered glycol bottle probe mimics solution

Includes

glass bottle probe with 10-ft cable, Bullet probe with 10-ft cable, flip-open stand, hook-and-loop strips, magnetic strips, batteries, and NIST-traceable calibration certificate with data.

*Please note we can only ship RKI products to customers within the United States

K-7904 Peracetic Acid - CHEMets® Visual Kit, 0-1 & 0-5 ppm by AquaPhoenix

The Peracetic Acid CHEMets® test kit (0-1 & 0-5 ppm) comes in a plastic case and contains everything needed to perform 30 tests: Refill (R-7904), Low and High Range Comparators (C-7902 & C-7904), Activator Solution (A-2500), 25 mL sample cup (A-0013), and instructions.

Test Method:

ThePeracetic Acid CHEMets® Test Kit (0-1 & 0-5 ppm) employs the DPD chemistry. The sample is treated with an excess of potassium iodide. Peracetic acid oxidizes the iodide to iodine. The iodine then oxidizes DPD (N,N-diethyl-p-phenylenediamine) to form a pink colored species in direct proportion to the peracetic acid concentration. Various oxidizing agents such as halogens, ferric ions and cupric ions will produce high test results. Hydrogen peroxide does not interfere with this test if present at levels comparable to the peracetic acid levels.