$75 - $100

37803-83 Traceable® Digital Thermohygrometer with Dew Point and Calibration by Digi-Sense

The meter warns you of environmental conditions that are out of a desired range with an audible alarm and bright red LED indicator. Features include a super-large, triple display for relative humidity, temperature, and dew point; min/max with reset function; and switchable °F/°C units.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Monitors relative humidity, temperature, and dew point
• Sound and light alarm activates when humidity level exceeds three presets

Includes

Built-in desktop stand, wall-mounting bracket and hardware, NIST-traceable calibration certificate with data, and two AA batteries.

Part Number: 550-7057-000

H-10-114-20 Toluene Colorimetric Gas Detection Tube, 10 - 300 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

08131-04 TI.31 2.5 Bottom-Mount Bimetal Thermometer, 3" Dial, 2.5" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

Part Number: H1072.8VN

WD-00653-09 Buffer Solution, pH 7.00; 5 x 60 mL Bottles/Pk by Oakton

• Oakton pH Buffer Solutions have pH/temperature tables printed on the labels for accurate calibrations (not on 60-mL, but included as insert)
• Manufactured under ISO 9000 quality guidelines and traceable to NIST standards
• If unopened, shelf life is 2 years; once opened, use pH 4 and pH 7 within 90 days, pH 10 within 30 days
• Buffer Options: pH 1.68 buffer available in clear, pH 4.01 buffer available in red, pH 6.86 buffer available in clear, pH 7.00 buffer available in yellow, pH 9.18 buffer available in clear, pH 10.01 buffer available in blue, pH 12.46 buffer available in clear

Convenient 60-mL bottles come in a pack of five - ideal for field use. Grab one when you're on the go! Standardized against NIST-traceable pH references for meters with 0.01 resolution.

Store buffers away from direct sunlight.

• All Oakton pH buffers are traceable to NIST standard reference materials
• Buffer solution lets you calibrate pH instruments to ensure accuracy
• If unopened, shelf life is 2 years
• USA buffer value of pH 7.00

08068-28 Irreversible 9-Point Vertical Temperature Label, 400-500F/204-260C; 25/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

Reliable proof that the product was maintained at the correct temperature

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

2448000 Digital Titrator Reagent Set: Hardness, Total 10-160mg/L by AquaPhoenix

Reagent set for the determination of Total Hardness by EDTA Digital Titrator titration (Hach method 8213). Range: 10-160 mg/L as CaCO3. Set contains: Buffer Solution (Hardness 1), ManVer® 2 Hardness Indicator Powder Pillows and 0.0800 M EDTA Digital Titrator Cartridge for 40 - 100 tests.

• Accurate results - when and where you need them
• Fast and Flexible
• Versatile
• Economical

08131-01 TI.31 2.5 Bottom-Mount Bimetal Thermometer, 3" Dial, 2.5" L/0-250F/20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

WD-00653-08 Buffer Solution, pH 4.01; 5 x 60 mL Bottles/Pk by Oakton

• Oakton pH Buffer Solutions have pH/temperature tables printed on the labels for accurate calibrations (not on 60-mL, but included as insert)
• Manufactured under ISO 9000 quality guidelines and traceable to NIST standards
• If unopened, shelf life is 2 years; once opened, use pH 4 and pH 7 within 90 days, pH 10 within 30 days
• Buffer Options: pH 1.68 buffer available in clear, pH 4.01 buffer available in red, pH 6.86 buffer available in clear, pH 7.00 buffer available in yellow, pH 9.18 buffer available in clear, pH 10.01 buffer available in blue, pH 12.46 buffer available in clear

Convenient 60-mL bottles come in a pack of five - ideal for field use. Grab one when you're on the go! Standardized against NIST-traceable pH references for meters with 0.01 resolution.

Store buffers away from direct sunlight.

• All Oakton pH buffers are traceable to NIST standard reference materials
• Buffer solution lets you calibrate pH instruments to ensure accuracy
• If unopened, shelf life is 2 years
• NIST/USA buffer value of pH 4.01

77ARTD-600C 77A Temperature Transmitter, Type RTD, Temperature Range: 0 To 600 C (32 To 1112 F) by Jenco

2-wire thermo well head type 4-20 mA current loop output signal temperature transmitter for thermocouple or RTD applications, 3 user selectable temperature ranges and adjustable Zero Span with current output proportional to the display LED s brightness. Two ambient temperature ranges are available model 77 and 77A. Specify type J, K, E, T or RTD and specify temperature range.

• Fits standard thermo well heads
• 12-36 vdc powered
• 3user-select measurement ranges
• Current proportional led brightness
• Factory calibrated
• User adjustable zero/span
• 2ambient temperature ranges
• Factory custom calibration available