$75 - $100

WD-17090-00 InnoCal NIST-Traceable Calibration, Multimeter, Handheld, 45-digit by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

Calibrations on 4.5 digit handheld multimeters are performed using high-accuracy multi-function calibrators and standards-grade reference multimeters per manufacturer's recommended procedures. Measurements can be taken up to 40,000 Volts, 1000 Amps, 10 Tera-Ohms, 110 Mega-Farads, and 1.1 Giga-Hertz.

Key Features

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate
• Calibration service for a handheld multimeter, 4.5-digit

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

301Pt-S ORP Electrode (platninum pin, 8-pin connector) by Apera

The Apera Instruments 301Pt-S Combination ORP Electrode/Tester/Sensor is equipped with a high-quality platinum ORP sensor and gel KCL electrolyte (no need for refill), suitable for regular water solutions testing and wastewater treatment.

With the 8-pin connector, the electrode is compatible with Apera's PH400, PC400, PH400S, PC400S meters. This electrode has a 6-Month limited warranty fulfilled by Apera Instruments, LLC.

• Equpped with high-Quality Platinum ORP sensor
• Gel KCL electrolyte adopted; No need for refilling.
• 8-pin connector
• 6-Month Warranty fulfilled by Apera Instruments

PBX 1" Sensor Probe Manifolds by Agrowtek

PBX sensor manifolds integrate water-tight gland fittings into a 1" PVC manifold for sensing pH, conductivy, ORP and water temperature inline with a recirculating pump. Compression glands have a rubber insert that clamps around the probes when tightened. Manifolds make it easy to install and remove probes for calibration and maintenance.

Available in 2, 3 or 4 port configurations. Max: 60psi, 30gpm.

Part Number: H103540LA

Old Part Number: HP1208500
New Part Number: H1208500PA

Part Number: H196910PA

Part Number: H10118VN

MW13 Iodine Mini-Colorimeter by Milwaukee

The revolutionary new range of Milwaukee handy photometers are compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.They work exactly the same way as the other Milwaukee photometers:

When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result.

The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products.

SCT-108.003.F2 Reference Electrode by ScichemTech

• Reference electrode
• Equipped with the 7801 sodium ion electrode
• Banana plugs

18520-01 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 6" L, .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

H-10-131-30 Methyl Bromide Colorimetric Gas Detection Tube, 20 - 300 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

TK3057-Z Hardness (Trace) Test Kit, 1 drop = 0.5 ppm as CaCO3 by AquaPhoenix

EndPoint ID Drop Count Test Kit, Total Hardness

1 drop = 0.5 ppm as CaCO3 / 25 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

2447200 Digital Titrator Reagent Set: Hardness, Calcium 10-160mg/L by AquaPhoenix

Reagent set for the determination of Calcium Hardness by EDTA Digital Titrator Titration Method (Hach method 8204). Range: 10-160 mg/L as CaCO3. Set contains CalVer® 2 Calcium Indicator Powder Pillows, Potassium Hydroxide Solution (8 N) and 0.0800 M (EDTA) Digital Titrator Cartridge for approximately 40-100 tests.

• Accurate results - when and where you need them
• Fast and Flexible
• Versatile
• Economical

Old Part Number: HP1208050
New Part Number: H120850PA

2106669 Zinc Reagent, ZincoVer_ 5, 0-3.0 mg/L by AquaPhoenix

For determination of zinc by the ZincoVer® 5 zincon method.
USEPA approved for wastewater analysis - Hach method 8009.
Range: 0.01 to 3.00 mg/L Zn. Sample size: 20-mL.
Pack of 100 Powder Pillows.

MA861 DO - Spare Membrane for Use With MW605 Dissolved O2 Meters & MA860 Probe - With 5 Membranes & "O" Rings To The Package by Milwaukee

The Milwaukee MA861 Dissolved Oxygen Membranes are compatible with the MA860 Galvanic Dissolved Oxygen Probe used on the MW605 MAX Dissolved Oxygen Meter.

DESIGN FEATURES

• Oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor
• Easy to fill with MA9072S Oxygen Electrolyte Solution
• Includes membranes and 5 o-rings

MGridSet Measurement Grid with Holder by Zarbeco

This Metric Grid has a 10 x 10 Matrix of .7mm x .7mm Squares. One square is further divided into a 10 x 10 Matrix of .07mm Squares. The Grid Line Widths are .001"± .0001" (.025mm±.0025mm).

The Pattern can be in direct contact with the object to be measured. The MGrid can be used to calibrate your MiScope or digital microscope. The holder can be used to raise your MiScope to be even with the MGrid when calibration of a flat object (like paper).

The Reticle Pattern is very durable, double layer, deposited evaporative Chrome/Chrome Oxide, for a reflectivity of less than 5% looking at the pattern. The Patterns on all Reticles manufactured are replicated from Precision Chrome on Glass Tooling under clean room conditions.

Features

• Accurate reference pattern for precise calibration

18520-65 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 18" L, .125 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

Package Includes: 6 Clips, 3 lead sets (hot & ground), ground lead and hold bar