$50 - $75

0560 1109 Mini Surface Thermometer by Testo

Affordable. The surface thermometer has a widened measuring tip making it particularly suitable for surface measurements.

• Perfect for checking surface temperatures
• Extra wide measuring tip for placing on a flat measuring point
• Measurement of high temperatures up to +300 °C
• Many areas of application: heating engineering, sanitation sector, and air conditioning/ventilation/refrigeration technology

Includes:

Mini surface thermometer including batteries.

Part Number: GABMAX6

*Please note we can only ship RKI products to customers within the United States

6m Drop line to enable pre-entry checks. Includes clip to attache to D-loop on detector.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

Old Part Number: HP120810
New Part Number: H120810LA

Part Number: P10165000PA

Part Number: XTFC1

SP250B Switchable Passive Oscilloscope Probe, 250MHz, 1.2M Cable Length by Test Products International

Selecting the correct oscilloscope probe ensures accuracy and can improve the performance of your test instrument. TPI offers a wide range of high quality oscilloscope probes designed to meet the most demanding applications.

The IP series monolithic probes have switchable attenuation and are available in 60 and 250MHz. These probes are ideal for technicians that need a basic oscilloscope probe.

The slimline design P and SP series probes are available in fixed or switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup.

TPI also offers three models of high voltage differential probes all with high common mode rejection, wide bandwidth, and fast rise times. Differential probes enable the viewing of signals not referenced to earth ground and provide better performance than a matched pair of single ended oscilloscope probes when measuring these types of signals.

Several important factors must be taken into account when selecting the proper probe.

• The probe should have sufficient bandwidth and rise time for the test instrument and application. Choose a probe with at least an equal bandwidth as the scope it will be used with. For best performance a probe with twice the bandwidth as the scope should be selected
• For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. In addition, if your oscilloscope has readout function, select a probe with this capability
• For differential probes, make sure the maximum differential voltage is adequate for your application and the common mode rejection specification meets the requirements of the tests being performed.

Features

• Attenuation: Ratio of the output signal to the input signal. Attenuation should remain constant decreasing by 3dB only as the frequency increases to the maximum bandwidth.
• Bandwidth: The maximum -3dB frequency that can be expected.
• Cable Length: Length of the cable from the end of the probe to the end of the connector. It is important to use a probe with just enough cable length for your needs. Long cables increase the capacitance and propagation delay of the probe.
• Compensation Range: The range a probe can be compensated to match the input capacitance of the test equipment it is being used with.
• IEC 1010: Probes with the IEC 1010 category rating have been designed for safety.
• Input Impedance: The total resistance and capacitance as measured at the tip of the probe. This specification is used to define the loading effect of a probe. At frequencies under 1MHz the input resistance of the probe will have the most influence. At higher frequencies the input capacitance will have the most influence.
• Max Input Voltage: The maximum voltage the probe can be used at.
• Max Differential Voltage: The maximum differential voltage that can be measured by a differential probe
• Readout: Probes with this capability are compatible with readout function oscilloscopes that automatically detect and display the attenuation factor of the probe.
• Rise Time: The time required for the leading edge of a pulse to rise from 10% to 90% of its final value.
• CMRR: Common Mode Rejection Ratio. A measure of a differential probes ability to reject any signals common to both test points in a differential measurement

Applications

• Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes
• Logic signal and waveform tests
• Measure voice / data signals
• Analyze power quality
• Test motor control circuits

Markets

• Electronic
• Communication
• Commercial
• Industrial

Part Number: P10162000PA

0516 0240 Smart Case (Refrigeration) Storage Case for Smart Probes Measuring Instruments by Testo

The testo Smart Case "Refrigeration" protects your instruments and keeps them tidy. The soft foam insert with custom-fit compartments ensures that each measuring instrument has its own space. And thanks to the impact-resistant and flexible hard outer shell, nothing happens to your tools if the case falls on the floor. The Smart Case is suitable for the safe storage and easy transportation of Smart Probes testo 115i (2x) and testo 549i (2x).

• Practical storage case for Smart Probes testo 115i (2x) and testo 549i (2x) (available separately)
• Outer: impact-resistant, flexible hard shell with zip
• Inner: protective foam insert with precise-fit compartments for each measuring instrument
• Compact dimensions: 250 x 180 x 70 mm

0646 3341 Self-adhesive Temperature Strips +204 to +260 °C (pack of 10) by Testo

Testoterm self-adhesive temperature measurement strips are thin, temperature-sensitive pieces of film which change their color when the temperature exceeds a specific value. This makes them ideal for monitoring the temperature of products and processes where the temperature is not allowed to exceed a certain limit, i.e. for moving or small objects like circuit boards, for long-term monitoring of storage and transport temperatures, in laboratories, in automobile technology, in aviation and in astronautics.

The temperature strips in action

The temperature strips are available in booklets of 10. The strips are peeled off and applied to the object you wish to measure.

The strips have a temperature scale ranging from +204 °C to +260 °C which is divided into little white boxes. As soon as a specific temperature has been exceeded, the strip changes color in the relevant boxes in the space of 2 to 3 seconds. The temperature steps for the individual boxes are as follows: 204 °C, 210 °C, 216 °C, 224 °C, 232 °C, 241 °C, 249 °C, 254 °C and 260 °C.

When the strips change color, they do so irreversibly. When a certain temperature has been exceeded, the color does not change back again when the temperature returns to previous levels. This allows you to see that critical thresholds have been exceeded even when the temperatures have returned to the levels they were before the limit was reached. This makes them ideal for use in storage and transport.

We are also able to provide you with temperature strips for monitoring other temperature ranges. The following measuring ranges are available:

• +37 ... +65 °C
• +71 ... +110 °C
• +116 ... +154 °C
• +161 ... +204 °C

• Measuring range +204 °C to +260 °C
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +204 °C to +260 °C, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

Part Number: GAXTSS

Part Number: 10L-449

Part Number: 10L-301

Part Number: P10161000PM4

Part Number: P19788.5VN