$50 - $75

AI4205-P Alkaline-Iodide Azide Reagent, 500mL by AquaPhoenix

• APHA for DO, 4500-C
• Corrosive Liquid BasicInorganic/UN3266

Specifications

• Packaging Type: Poly
• Size: 500 mL

TDS500/G Conductivity Solution,500ppm/731uS,1 Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

602 Flexible Electrode Holder by Apera

Apera Instruments' 602 electrode holder is easily adjustable for your testing needs. The backside of the holder is designed so you can snap your cables in place; no more tangled cables during your tests. Holds up to three electrodes at once.

1414869 MolyVer 2 Reagent Powder Pillows, 25 mL, pk/100 by AquaPhoenix

For determination of high range molybdenum by the mercaptoacetic acid method (Hach method 8036). Range: up to 40.0 mg/L Mo Sample Size: 25 mL. Pack of 100 powder pillows

TDSK58700/G Conductivity Standard Solution, 58,700uS (Gal) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

90250-00 Liquid-In-Glass Maximum/Minimum Thermometer; -35 to 50C (-30 to 120F), Organic Liquid Fill by Digi-Sense

Efficient thermometer measures both minimum and maximum temperatures in Fahrenheit and Celsius scales. Readings are accurate to ±1 scale division. Bulbs are enclosed in a sturdy plastic case suitable for outdoor or indoor use.

• For reference only (should not be calibrated)

TDS115N Non-Bluetooth TDS + Temperature tester (0 to 50.00 mg/L) by Jenco

Waterproof, economical TDS/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable TDS results easily and affordability. This was accomplished by starting Jenco's longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 Point calibration
• ±1% F.S. accuracy

Simple Operation

• Clear, large LCD displays TDS and temperature
• Button operations with tactile feedback
• IP67 waterproof housing

18523-74 Type T Thermocouple Quick Dis-connector, with Std-Connector, 12" L, .125 Dia. Exposed Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with 316 Stanless Steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

18523-62 Type T Thermocouple Probe Quick Dis-connector, with Mini-Connector, 6" L, .062 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with 316 Stanless Steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.