$50 - $75

TDSK111900/G Conductivity Standard Solution, 111.9mS (Gal) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

18525-25 Type J Hermetically Sealed Tip Insulated Thermocouple, 10ft L, 24 Awg by Digi-Sense

Do not subject type J exposed-junction probes to moisture as they will rust

• Each Probe is hermetically sealed and tested to 25psi
• Can be used for applications requiring an isolated junction.
• Response Time: 0.75 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped lead ends Custom designs or changes to this product are available upon request

WD-49006-53 Hygrothermograph Chart Recorder Replacement Pens, Blue; 5/Pk by Oakton

Different styles and colors to fit a wide variety of recorders and applications.

• Blue replacement pens ideal for hygrothermograph chart

18527-39 Thermocouple Mounting Panel, Horizontal, Mini Connectors; 10 Circuits by Digi-Sense

Use to creat easy to access direct temperature connection in control rooms, test stands, laboratories, and plants. Use with insert panel temperature connectors to create a complete panel assembly. Available in 2, 4, 5 & 6 circuits for Vertical Face Plates and 6, 8, 10 & 12 circuits for Horizontal Face Plates.

90433-97 Thermowell, 316 Stainless Steel, 12" Length, 1/2" Connection by Digi-Sense

To match your probe to a thermowell, first measure the distance from the probe's tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell ("A" dimension). Other thermowell sizes and materials are available - call our Application Specialists for more information.

• Limited-Space Thermowell when you need a shorter insertion depth.
• Standard Thermowell for general-purpose applications.
• Heavy-Duty Thermowell for higher fluid velocity ratings.

AS1000-P Ammonia Standard Solution as N, 1000 mg/L (ppm), 500mL by AquaPhoenix

Specifications

• Packaging Type: Glass
• Size: 500 mL

18524-31 Type K Thermocouple Quick Dis-connector, with Std-Connector, 18" L, .125 Dia. Exposed Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

18524-97 Type J Ind Thermocouple Probe Probe 12" L, 12" Ext .250 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly or can also to directly inserted
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

18524-25 Type J Thermocouple Probe Quick Dis-connector, with Std-Connector, 18" L, .125 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with 316 Stanless Steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

TK1325-Z Lactic Acid Test Kit: 1 drop = 0.1% as Lactic Acid / 1mL by AquaPhoenix

Refill Reagents: SH6220-B, PH1605-A