$50 - $75

08113-31 High Temperature Thermocouple Probe, Fiberglass Insulated Wire, 20G, Exposed, Stripped Leads, Type K; 120" L by Digi-Sense

Fiberglass wire is not recommended for use in moist or wet environments.

Exposed-junction probes are not recommended for use with aqueous solutions.

Do not subject type J exposed-junction probes to moisture as they will rust

• Response Time: 1 seconds or greater
• All insulated-wire probes include straight insulated cable with no handle and stripped leads.
• Custom designs or changes to this product are available upon request

EC111B Bluetooth Conductivity/Salinity/TDS + Temperature Tester (0.00 to 20.00 mS/cm) by Jenco

A Bluetooth conductivity/temperature tester designed with the everyday user in mind. This tester pairs with Jenco's free conductivity Bluetooth iOS or Android app to provide the simplest way to accurately measure conductivity and temperature readings.

• Measures Conductivity, TDS, salinity and temperature
• Simple guided calibration (easy one point calibration)
• Displays last calibration date
• Displays calibration history (pro app)
• Automatic temperature compensation
• Customized measurement settings
• Reading quality indicator
• Saves readings with time-date stamp and GPS mapping (pro app)
• Data sharing (pro app)
• IP67
• RoHS complaint
• Two AAA batteries to ensure long battery life
• Low battery indicator
• Auto shutoff

CS1413-G Conductivity Standard, 1413 μS/cm, 4L by AquaPhoenix

• Traceable to NIST

Specifications

• Packaging Type: Poly
• Size: 4.00 L

Part Number: 10L-325

Part Number: 17L-314

TDS60000/G Conductivity Solution, 60,000ppm/60,000uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

ORP60-DE Spare ORP/Temp. Electrode for ORP60-Z (double-junction) by Apera

The Apera Instruments ORP60-DE is the replacement ORP probe exclusively for ORP60-Z Smart ORP tester. This probe features a Platinum ORP sensor with a double-junction structure and built-in temperature sensor. Designed for general water solution testing's ORP measurement.

• Replacement ORP probe ONLY for ORP60-Z
• Platinum ORP sensor
• Double-junction structure
• Built-in temperature sensor
• Made for general water solution's ORP testing

2106169 NitraVer® 5 Nitrate Reagent Powder Pillows, 10 mL by AquaPhoenix

• For determination of MR and HR nitrate by the NitraVer® 5 cadmium reduction method. Hach methods 8039 and 8171
• Range: 0.1 to 10.0 or 0.3 to 30.0 mg/L as nitrate-N. Sample Size: 10 mL
• Pack of 100 Powder Pillows

Part Number: CC-17/34

AA1000-P Acetic Acid, Glacial (99%), ACS, 500mL by AquaPhoenix

• CAS No. 64-19-7
• CH3COOH FW=60.05
• Acetic Acid/2789/Truck Only

Specifications

• Packaging Type: Glass
• Size: 500 mL

18523-36 Type K Thermocouple Quick Dis-connector, with Mini-Connector, 6" L, .125 Dia. Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with 316 Stanless Steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

18523-44 Type K Thermocouple Quick Dis-connector, with Mini-Connector, 6" L, .125 Dia. Exposed Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with 316 Stanless Steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

TK3016-Z Hardness (Total) Test Kit, 1 drop = 1 gpg / 15 mL by AquaPhoenix

Our Hardness Test Kit is used to determine water hardness for applications in the Cleaning and Sanitation Industry. It is designed to give you ppm as CaCO3 so that you can establish detergent concentration in cleaning applications.

FLT006 Stainless Steel Float Switch in 316SS 1/4" NPT 60 Watt by Chicago Sensor

• Versatile and sturdy stainless steel float switch.
• UL Recognized part used in thousands of products.
• Normally closed; float can be removed, inverted and replaced for normally open operation.
• 1/4" NPT tapered stem threading; self-sealing; does not come with a nut.
• Warranted against manufacturer defect for one year from delivery date.

Part Number: 10L-329