$50 - $75

Part Number: 17L-336

PBX-210 2-Port Sensor Manifold by Agrowtek

PBX sensor manifolds integrate water-tight gland fittings into a 1" PVC manifold for sensing pH, conductivy, ORP and water temperature inline with a recirculating pump. Compression glands have a rubber insert that clamps around the probes when tightened. Manifolds make it easy to install and remove probes for calibration and maintenance.

Available in 2, 3 or 4 port configurations. Max: 60psi, 30gpm.

*Please note we can only ship RKI products to customers within the United States

TDSK300000/G Conductivity Standard Solution, 300,000uS (Gal) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

*Please note we can only ship RKI products to customers within the United States

WD-20250-50 Compact Digital Multimeter, Manual-Ranging with NIST-Traceable Calibration by Digi-Sense

Get quality instruments that deliver consistent, reliable measurements without depleting your budget. These durable, handheld multimeters are an economical alternative to higher-priced instruments on the market today.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Autoranging on select models, automatically selects the optimal measuring range for maximum resolution
• Stay safe and prevent damage with overload protection
• Increased durability with double-molded plastic housing

Three-in-One Digital Multimeter (20250-52)

• Three practical instruments in one: multimeter, noncontact voltage detector, and flashlight
• Permanently attached test leads so they don't get lost
• Diode check and continuity test included to check accuracy

Compact Digital Multimeters (20250-50, -51)

• CAT III-600 V designation for safety
• Available in manual ranging version
• Bright backlight display has 1.1" tall digits
• Model 20250-50 offers dedicated battery test function to check the quality of your 9 V and 1.5 V batteries

Industrial Digital Multimeters (20250-53, -54)

• CAT III-600 V and CAT III-1000 V ratings for safety
• IP67 rating for dustproof and waterproof protection
• Flashing red LED alerts you to presence of live voltage
• Model 20250-54 has True RMS for improved reading accuracy and an analog bar graph for viewing trends

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads (models 20250-50, -51, -52), carrying case (models 20250-50, -51) batteries, and NIST-traceable calibration report with data supplied by InnoCal.

Old Part Number: P10724
New Part Number: P10724VN

GHS1305 Exploding Bomb Pictogram Labels (2" x 2"), 500/roll by GHS Safety

Need a smaller format of HazCom GHS Pictograms for labelling your goods or documents? 2" x 2" HazCom GHS pictogram labels come in rolls 500. Printed on gloss paper with peel and stick adhesive, these labels will apply easily to metal and plastic containers.

*Please note we can only ship RKI products to customers within the United States

08006-25 Dry Block/Incubator Liquid-In-Glass Thermometer; 0 to 70C, 150mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are designed for use in specific applications. These Durac thermometers feature markings that are permanently printed on the glass, individually serialized, and red spirit liquid that has a dark scale contrasts against a white background. Some thermometers are PFA coated for added safety which may cause a slight change in accuracy up to 1 division.

Dry block thermometers - designed for use in all standard heating blocks and water baths with most having arrows indicating critical temperatures.

• Non-mercury liquid

18524-71 Inconel Type K Thermocouple Probe, Quick Dis-connector, 18" L x 1/16" Dia, Grounded by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

Part Number: 101150PA