$50 - $75

Part Number: 17L-300

18524-94 Type T Ind Thermocouple Probe Probe 12" L, 12" Ext .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly or can also to directly inserted
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

Part Number: 17L-341

DGF1BAAACXB Pulsafeeder Digital Glycol Feeder, 50 Gallon with Alarm Dry Contact by Quantrol

Pulsafeeder's Digital Glycol Feeder provides a consistent operating pressure in closed loop systems. This allows a controlled percentage of glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder is available in two models; the DGF1 for single loop and the DGF2 for dual loop systems.

The control unit utilizes an 8-bit microcontroller for precise feed system control. The NEMA4X enclosure can be wired conduit or prewire for easy startup. The preplumbed assembly includes a pressure gauge, pressure switch, and pressure relief valve to prevent excessive pressure build up. A low liquid level switch with optional audible alarm prevents the gear pump from operating when the solution is low.

Each Digital Glycol Feeder is fully piped and wired with the following components:

Suction Assembly includes:

• PVC tubing and fittings
• PVC ball valve
• Clear poly bowl strainer

Discharge Assembly Includes:

• PVC pipe and fittings
• PVC ball valve
• PVC check valve
• Pressure gauge
• Brass relief valve with return to tank tubing

Controller Features

• Compact NEM4X enclosure for industrial applications
• Touch keypad user interface for gear pump operation
• LED indicators loss of pressure and low level
• HOA control of pumps and alarm to force relay OFF indefinitely or force relay ON for a period of 5 minutes
• Alarm silence feature
• Dual alarm relay outputs are factory configured for dry contact or powered
• Available in 115V or 230V
• Agency approved for US and Canada

Pump Features

• Heavy duty gear pump
• Bronze and stainless steel wetted components
• Close tolerance design allows for consistent performance
• Helical gears for quiet operation

System Features

• Economical design for competitive bid specifications

COND111N Non-Bluetooth Conductivity + Temperature Tester (0 to 20 mS/cm) by Jenco

Waterproof, economical conductivity/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable conductivity results easily and affordability. This was accomplished by starting Jenco's longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 Point calibration
• ±1% F.S. accuracy

Simple Operation

• Clear, large LCD displays conductivity and temperature
• Button operations with tactile feedback
• IP67 waterproof housing

Available Configurations

Single parameter pH, ORP, conductivity and TDS models with temperature. Conductivity and TDS comes in three different models each for three different measurement ranges.

K-1700 FoalWatch (Calcium) by AquaPhoenix

FoalWatch Kit contains everything you need for testing.

Kit comes complete with:

• 20 Test ampoules
• Test tube for collecting mare's milk
• Bottle of distilled water
• Syringe
• Sample cup
• Complete instructions

18525-04 Type K Spring Loaded Ind Thermocouple Probe Probe 4" L, 12" Ext .250 Dia, Ung Jct by Digi-Sense

These probes cannot be inserted directly into a medium. Spring loaded industrials are not sealed where the threads meet the probe. They must be inserted into a thermowell or other sealed vessel.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are spring loaded which allows the probe to be bottomed out into a thermowell
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

Part Number: 10L-79-1000A

Part Number: P126550LM8

GHS1316F Workplace Self-Lam Label (3" x 6") 25/pkg FR by GHS Safety

Our GHS workplace labels clearly identify hazards to your employees. These labels offer an easy to use design to correctly identify the hazard information for labeling secondary containers in your workplace.

The labels are made using an premium peel and stick vinyl with a permanent adhesive. Available with or without a self laminating protective shield that is installed after completing the information, making them chemical and scuff resistant. Sold in packages of 25.

K-2050 Chloride - Titrets Titration Cells, 50-500 ppm by AquaPhoenix

Increments: 50, 55, 60, 65, 70, 75, 80, 90, 100, 125, 150, 175, 200, 250, 350, 500 ppm

Benefits of Titrets Technology:

• Dependable, sealed single-use titrants
• Fast, easy procedure – no need to count drops
• No burettes or other equipment necessary
• Perform a titration ANYWHERE

93800-11 Type K Industrial Direct Insert Ungrounded Thermocouple Probe 6" L by Digi-Sense

Thermocouple Probes are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 18 gauge wire and is encased with Magnesium Oxide insulation, and has a 316 stainless steel sheath. Featuring a standard size aluminum protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block. Head has a 3/4" NPT(F) opening on the side for easy connection to electrical conduit.

Spring loaded probes: designed to bottom out when inserted in to a thermowell to produce an accurate reading. (Not designed for direct insertion in to medium)

Non-spring loaded probes: designed to be directly inserted into the medium being measured without the use of a thermowell.