$50 - $75

Part Number: P10133VA

TK1018-Z Alkalinity (P/T) Test Kit, 1 drop = 10 ppm as CaCO3 by AquaPhoenix

EndPoint ID Drop Count Test Kit, P&T Alkalinity

1 drop = 10 ppm as CaCO3 / 25 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

0646 2532 Self-adhesive Temperature Strips +161 to +204 °C (pack of 10) by Testo

Testoterm self-adhesive temperature measurement strips are thin, temperature-sensitive pieces of film which change their color when the temperature exceeds a specific value. This makes them ideal for monitoring the temperature of products and processes where the temperature is not allowed to exceed a certain limit, i.e. for moving or small objects like circuit boards, for long-term monitoring of storage and transport temperatures, in laboratories, in automobile technology, in aviation and in astronautics.

The temperature strips in action

The temperature strips are available in booklets of 10. The strips are peeled off and applied to the object you wish to measure.

The strips have a temperature scale ranging from +161 °C to +204 °C which is divided into little white boxes. As soon as a specific temperature has been exceeded, the strip changes color in the relevant boxes in the space of 2 to 3 seconds. The temperature steps for the individual boxes are as follows: 161 °C, 169 °C, 172 °C, 177 °C, 184 °C, 189 °C, 197 °C and 204 °C.

When the strips change color, they do so irreversibly. When a certain temperature has been exceeded, the color does not change back again when the temperature returns to previous levels. This allows you to see that critical thresholds have been exceeded even when the temperatures have returned to the levels they were before the limit was reached. This makes them ideal for use in storage and transport.

We are also able to provide you with temperature strips for monitoring other temperature ranges. The following measuring ranges are available:

• +37 ... +65 °C
• +71 ... +110 °C
• +116 ... +154 °C
• +204 ... +260 °C

• Measuring range +161 °C to +204 °C
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +161 °C to +204 °C, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

18525-03 Type K Spring Loaded Ind Thermocouple Probe Probe 4" L, 12" Ext .250 Dia, Grn Jct by Digi-Sense

These probes cannot be inserted directly into a medium. Spring loaded industrials are not sealed where the threads meet the probe. They must be inserted into a thermowell or other sealed vessel.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are spring loaded which allows the probe to be bottomed out into a thermowell
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

Old Part Number: P101635
New Part Number: P101635PA

*Please note we can only ship RKI products to customers within the United States

Old Part Number: P10118N
New Part Number: P10118VN

PBX-210 2-Port Sensor Manifold by Agrowtek

PBX sensor manifolds integrate water-tight gland fittings into a 1" PVC manifold for sensing pH, conductivy, ORP and water temperature inline with a recirculating pump. Compression glands have a rubber insert that clamps around the probes when tightened. Manifolds make it easy to install and remove probes for calibration and maintenance.

Available in 2, 3 or 4 port configurations. Max: 60psi, 30gpm.

Part Number: P19711000PA

0646 0108 Self-adhesive Temperature Strips +37 to +65 °C (pack of 10) by Testo

Testoterm self-adhesive temperature measurement strips are thin, temperature-sensitive pieces of film which change color when the temperature exceeds a specific value. This makes them ideal for monitoring the temperature of products and processes where the temperature is not allowed to exceed a certain limit, i.e. for moving or small objects like circuit boards / long-term monitoring of storage/transport temperatures and in laboratories/automobile technology/aviation/astronautics.

The temperature strips in action

The strips are available in booklets of 10. They are peeled off and applied to the object's surface.

The strips have a temperature scale ranging from +98.6 to +149 °F which is divided into little white boxes. As soon as a specific temperature has been exceeded, the strip changes color in the relevant boxes within 2 - 3 seconds.

The temperature strips change color irreversibly when a certain temperature has been exceeded. The color does not change back. This allows you to see that critical thresholds have been exceeded even when temperatures have dropped again. Ideal for use in storage and transport.

We are also able to provide you with temperature strips for monitoring higher temperatures. The following measuring ranges are available:

• +159.8 ... +230 °F
• +240.8 ... +309.2 °F
• +321.8 ... +399.20 °F
• +399.2 ... +500 °F

• Measuring range +98.6 °F to +149 °F
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +98.6 °F to +149 °F, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

18524-94 Type T Ind Thermocouple Probe Probe 12" L, 12" Ext .250 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly or can also to directly inserted
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

*Please note we can only ship RKI products to customers within the United States

Replacement Power Supply Units (PSU) for use with cradle, multiway and interface chargers or in combination with Charger Interface Communication Kit (C011305)

TDS30/G Conductivity Solution, 30ppm/46.7uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States