$50 - $75

GHS1306 Corrossive Pictogram Labels (2" x 2"), 500/roll by GHS Safety

Need a smaller format of HazCom GHS Pictograms for labelling your goods or documents? 2" x 2" HazCom GHS pictogram labels come in rolls 500. Printed on gloss paper with peel and stick adhesive, these labels will apply easily to metal and plastic containers.

GHS1311 Environment Pictogram Labels (2" x 2"), 500/roll by GHS Safety

Need a smaller format of HazCom GHS Pictograms for labelling your goods or documents? 2" x 2" HazCom GHS pictogram labels come in rolls 500. Printed on gloss paper with peel and stick adhesive, these labels will apply easily to metal and plastic containers.

0646 1724 Self-adhesive Temperature Strips +116 to +154 °C (pack of 10) by Testo

Testoterm self-adhesive temperature measurement strips are thin, temperature-sensitive pieces of film which change their color when the temperature exceeds a specific value. This makes them ideal for monitoring the temperature of products and processes where the temperature is not allowed to exceed a certain limit, i.e. for moving or small objects like circuit boards, for long-term monitoring of storage and transport temperatures, in laboratories, in automobile technology, in aviation and in astronautics.

The temperature strips in action

The temperature strips are available in booklets of 10. The strips are peeled off and applied to the object you wish to measure.

The strips have a temperature scale ranging from +116 °C to +154 °C which is divided into little white boxes. As soon as a specific temperature has been exceeded, the strip changes color in the relevant boxes in the space of 2 to 3 seconds. The temperature steps for the individual boxes are as follows: 116 °C, 121 °C, 127 °C, 132 °C, 138 °C, 143 °C, 149 °C and 154 °C.

When the strips change color, they do so irreversibly. When a certain temperature has been exceeded, the color does not change back again when the temperature returns to previous levels. This allows you to see that critical thresholds have been exceeded even when the temperatures have returned to the levels they were before the limit was reached. This makes them ideal for use in storage and transport.

We are also able to provide you with temperature strips for monitoring other temperature ranges. The following measuring ranges are available:

• +37 ... +65 °C
• +71 ... +110 °C
• +161 ... +204 °C
• +204 ... +260 °C

• Measuring range +116 °C to +154 °C
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +116 °C to +154 °C, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

Part Number: P1013100PN

Old Part Number: P105510
New Part Number: P105510PA

PROBTEMP Temperature Probe by Bluelab

Use the temperature probe in the same solution as the Bluelab® pH Probe. The probe provides a temperature reading and automatic temperature compensation (ATC) for pH measurements.

Features

• Robust and easy to clean stainless steel body
• Waterproof cable joint
• Quality 3.5mm connection
• No calibration required
• Bluelab 'EarthLink' compatible to reduce interference
• 2 meter / 6.5 foot standard cable
• Use with Bluelab® pH Controller and Bluelab® pH Controller Connect

WD-17060-00 InnoCal NIST-Traceable Calibration; Timer/Stopwatch by Oakton

Calibrations on timers and stopwatches are performed using a precision timometer. Measurements can be taken from 60 seconds to 720 hours.

WD-35653-08 Conductivity Calibration Pouches, 84 uS; 20/Pk by Oakton

Single-use 20-mL pouches are sealed to ensure freshness - take these convenient standard solutions anywhere! Don't worry about transferring solution into another container - calibrate directly from the pouch.

A μS-to-ppm conversion table is printed on each pack for quick reference.

Sealed for freshness and easy travel

• Tear off a corner, or the entire top - opens wide enough for all probe types
• Notched corners for easy opening from either side
• Calibrate to 84 μS with these one-use pouches

PBX-410 4-Port Sensor Manifold by Agrowtek

PBX sensor manifolds integrate water-tight gland fittings into a 1" PVC manifold for sensing pH, conductivy, ORP and water temperature inline with a recirculating pump. Compression glands have a rubber insert that clamps around the probes when tightened. Manifolds make it easy to install and remove probes for calibration and maintenance.

Available in 2, 3 or 4 port configurations. Max: 60psi, 30gpm.

Part Number: P126525LM5

For use with PC Interface Charger. See also Charger Interface Communication Kit, C011305.

TK3052-Z Hardness (Calcium) Test Kit, 1 drop = 10 ppm as CaCO3 by AquaPhoenix

EndPoint ID Drop Count Test Kit, Calcium Hardness

1 drop = 10 ppm as CaCO3 / 25 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

Old Part Number: P197150
New Part Number: P197150PA

SXL-1 Optical Liquid Sensor, WET-ON by Agrowtek

Electronic optical liquid sensors are durable, have no moving parts and are easy to maintain. SXL sensors can detect fluid levels in tanks, flow in pipes, or leaks in drip pans when liquid touches the sensor tip. Wide voltage range and high current capacity makes the SXL sensor practical for TTL logic, industrial PLC or direct relay control applications. 1/4" NPT threading and removable wiring terminal block with pin-out cast into the hex head makes installation or replacement fast and simple. When the output is energized a red LED illuminates the sensor body giving a visual status indication. Available in 'wet-on' and 'dry-on' configurations, or PWM output for applications requiring error indication and failure monitoring. Other intelligent functions include "stable state" switching to detect splashing, one-second output debounce and error indication from infrared flooding.

Applications

• Water Tanks
• Coolant Reservoirs
• Hydraulic Fluid Reservoirs
• Warewash Equipment
• Irrigation Systems
• High & Low Level Detection
• Leak & Overflow Detection
• Flow Detection in Pipes
• Automatic Fill/Drain Level Control