$50 - $75

Part Number: 10L-289-300

Part Number: 17L-320

Part Number: 10L-50-25

Part Number: 17L-383S

Part Number: 17L-362

98767-48 Traceable Infrared Thermometer with Pocket Clip and Calibration by Digi-Sense

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• One-button design makes operation easy
• °F/°C switchable
• Fixed emissivity at 0.95

Includes

pocket clip, key chain, batteries, and NIST-traceable calibration certificate with data.

153 Autoranging DMM with Boot, Test Leads, Battery and Manual by Test Products International

The 153 is a hand-held autoranging DMM. The 153 measures ACV, DCV, ACA, DCA, Resistance, Diodes and Continuity.

Features:

• Agency Approval: Meets CE and IEC 1010 requirements. UL Listed to U.S. and Canadian Safety Standards.
• Sleep: Instrument automatically powers down after 30 minutes of inactivity, however, it will continue acquiring data in its various modes. Pressing any push button or turning the rotarty switch returns the 153 back to normal.
• Range: Allows you to either manual range or use auto range to select the appropriate range.
• Auto Off: Preserves battery life. LCD shows oFF when in this mode.
• Record: Records Min/Max values.M
• Data Hold: Holds the reading on the display for easy viewing.
• 0.3% DCV basic accuracy
• 0 to 750 ACV; max resolution 1mV
• 0 to 1,000 DCV; max resolution 0.1mV
• 0 to 40MΩ; max resolution 0.1Ω
• AC/DC amps to 10; max resolution 0.1uA
• Min/Max
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

Applications:

• Thermocouples in furnaces or gas applications
• Heat anticipator current in thermostats
• Line voltage
• Voltage of direct drive DC motors
• Control circuit voltage
• Motor run and start capacitors
• Flame safeguard control current
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring
• Continuity of circuit breakers
• Temperature with optional temperature adapter
• Bar graph to indicate rapid fluctuations in measurements

The 153 comes complete with the following accessories:

• Rubber Boot
• Test Lead Set
• Battery
• Instruction Manual

Part Number: P1013100PA

Part Number: 17L-308

Part Number: 10L-174-10

90002-02 Traceable® Time and Date Digital Thermometer with Calibration; Bottle Probe by Digi-Sense

Ideal for monitoring temperature in the lab, home or office. Thermometer includes a remote probe with 6-ft (1.8m) cable to measure outdoor temperature and an internal sensor to measure indoor temperature. Display can be changed to show probe or ambient temperature, time of day, and month/day.

Thermometer can also display the exact time and date when the minimum and maximum temperature occurred. The temperature sensor performs accurately in most environments even including under water. Use rear stand to place unit on table or attach to wall via Velcro® strip or the two rear-mounted screw holes.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 90002-02 is supplied with special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle which protects it from rapid temperature changes when refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Simultaneously displays temperatures and time
• Wire mounting bracket permits easy probe placement

Includes

NIST-traceable calibration certificate with data and one AAA alkaline battery

Part Number: 17L-346

TDSK300000/G Conductivity Standard Solution, 300,000uS (Gal) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

1417869 MolyVer 3 Reagent Powder Pillows, 25 mL, pk/100 by AquaPhoenix

For determination of high range molybdenum by the mercaptoacetic acid method (Hach method 8036). Range: up to 40.0 mg/L Mo Sample Size: 25 mL. Pack of 100 powder pillows

GHS1059 Health Hazard Pictogram Tag (25/pk) by GHS Safety

HazCom GHS Pictogram Tags offer a quick and easy way to identify hazards throughout your facilites. Perfect for marking drums, valves, cylinders and many other applications. Each durable plastic tag has the HazCom GHS pictogram and written description both sides, so the hazard information is always visible. Available in English/Spanish or English/French versions. 25 tags per pack. EN/FR

WD-20250-31 Precalibrated Humidity and Temperature Indicator with External Probe by Digi-Sense

Assess comfort level of your environment with unique comfort indicator symbol that displays comfortable, wet (high humidity), or dry (low humidity). Read temperature, humidity, and time on easy-viewing digital thermohygrometer display.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• User-selectable °F or °C units
• Max/Min reading for temperature and humidity
• Clock with alarm and date
• Preserve battery with auto shut-off
• Hands-free operation with stand or wall-mount options

Additional features for model 20250-31

• Monitor outdoor temperatures with included external temperature probe

Applications

• Educational
• Residential
• Laboratory
• Light Industrial
• R&D

Includes

Built-in desktop stand, wall-mounting bracket, one AAA battery, and NIST-traceable certificate with data and uncertainties. Model 20250-31 also includes an external temperature probe with a 3-ft (0.9-m) cable.