$50 - $75

Old Part Number: P101150
New Part Number: P101150LA

Part Number: 10L-37-300

*Please note we can only ship RKI products to customers within the United States

Part Number: P10111000PM2

ND2272-P Nitrite Titrant (CAN Solution), 500mL by AquaPhoenix

• 1 drop = 40ppm as NaNO2/5mL

Specifications

• Packaging Type: Poly
• Size: 500 mL

*Please note we can only ship RKI products to customers within the United States

Part Number: P197130LM2

*Please note we can only ship RKI products to customers within the United States

Old Part Number: P197195
New Part Number: P197195PA

TDS15/G Conductivity Solution, 15ppm/23.8uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Part Number: 10L-359

TH300 Thermometer complete with penetration probe and 1 meter cable by Milwaukee

Thousands of people have relied on the Milwaukee TH300 compact Digital Temperature Meter to read temperature in difficult areas with it's flexible 1 meter cable and stainless steel probe. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries and wineries the TH300 is your quick temperature meter.

SUMMARY

The Milwaukee TH300 compact digital thermometer is specifically designed to help professionals and home owners regulate their pools, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.

WHAT PEOPLE ARE SAYING

"Accurate results and calibrated right out of the box."
"Must have for any aquarium owner."
"Good value. Easy to use. Consistent."
"No dangerous chemicals"
"Used it in the field for checking the fruit to harvest, was great"

DESIGN FEATURES

• Fast, accurate results with large digital LCD readout.
• Extended temperature range: -50 to 150°C (-58 to 302°F)
• Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.
• Easy, flexible 1 meter cable for hard to reach places.
• Stainless Steel pointed probe for easy fruit penetration and easy cleaning.
• Long battery life, approx. 1 year. (batteries included)
• High accurate digital readings.

Clean and Safety

Here are our top four tips.
1. Always clean you stainless steel probe after use.
2. Pay close attention to the direction of the probe's sharp tip.
3. If the LCD begins to fade, change your batteries.
4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.

94460-15 Traceable® Countdown 1-Channel Digital Stopwatch with Calibration by Digi-Sense

Stopwatch features a dial of preselected count-down durations. Choose from 1, 3, 5, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50, 55, and 60 minutes; or using the push-buttons, set the timer to countdown anywhere from 99 hours to 1 second. Display shows running time remaining to zero. When zero is reached, an alarm sounds for 5 seconds. Select the repeat-cycle mode and the timer will automatically begin to count down again from the programmed time.

Stopwatch also functions as a count-up stopwatch with single-event, lap, and cumulative split timing. Store up to eight timing functions in memory for later recall. Dual display shows two independent countdown timers or two indepedent count-up timers.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Shockproof ABS plastic case is perfect for the lab or field

Includes

NIST-traceable calibration certificate with data, lanyard, and battery.

GHS1054 Flame Over Circle Pictogram Tag (25/pk) by GHS Safety

HazCom GHS Pictogram Tags offer a quick and easy way to identify hazards throughout your facilites. Perfect for marking drums, valves, cylinders and many other applications. Each durable plastic tag has the HazCom GHS pictogram and written description both sides, so the hazard information is always visible. Available in English/Spanish or English/French versions. 25 tags per pack.

*Please note we can only ship RKI products to customers within the United States

WD-00653-36 Conductivity and TDS Standard, 1413 μS; 5 x 60 mL Bottles/Pk by Oakton

• KCl, NaCl and 442 conversions printed on the bottle for ease of use (excluded on 60-mL bottle, but included in insert)
• Temperature corrections are printed on the bottle, with certified values listed in tables and referenced to 25°C (excluded on 60-mL bottle, but included in insert)
• Manufactured under ISO 9000 quality guidelines and traceable to NIST standards
• If unopened, shelf life is 1 year. If opened recommended shelf life is 4 months
• Conductivity options range from 1 μS/cm to 200,000 μS/cm

Convenient 60-mL bottles come in a pack of five - ideal for field use. Grab one when you're on the go!

• All Oakton Conductivity and TDS Standards are traceable to NIST standard reference materials
• Solutions help you calibrate conductivity instruments to ensure accuracy
• Standard values given at 25°C
• Use when readings are expected to be around 1413 μS/cm