$50 - $75

94460-70 Traceable® General-Purpose Digital Thermometer with Calibration; 1 Wire Probe by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period - minimum and maximum temperatures are stored until the memory is cleared. Models feature a triple display that simultaneously shows current, minimum, and maximum temperatures. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points, and continues to sound even if temperature returns to nonalarm range. Thermometer reads ambient temperature or probe temperature.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Models 94460-70 has a wire probe and designed for general-purpose applications.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Triple-display - shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, probe(s), and two AA batteries

Part Number: 10L-441

Part Number: 10L-385

18523-49 Type J Thermocouple Quick Dis-connector, with Mini-Connector, 6" L, .188 Dia. Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with 316 Stanless Steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

GHS1054 Flame Over Circle Pictogram Tag (25/pk) by GHS Safety

HazCom GHS Pictogram Tags offer a quick and easy way to identify hazards throughout your facilites. Perfect for marking drums, valves, cylinders and many other applications. Each durable plastic tag has the HazCom GHS pictogram and written description both sides, so the hazard information is always visible. Available in English/Spanish or English/French versions. 25 tags per pack.

Part Number: 17L-374

TK1018-Z Alkalinity (P/T) Test Kit, 1 drop = 10 ppm as CaCO3 by AquaPhoenix

EndPoint ID Drop Count Test Kit, P&T Alkalinity

1 drop = 10 ppm as CaCO3 / 25 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

Part Number: 116L-14-25

Part Number: 10L-471

GHS1241 Apron PPE Hazard Class Pictogram Label (1/2"), 1820/Pad by GHS Safety

Provide your employees with a quick and easy way to identify Personal Protective Equipment & Hazard Class requirements. GHS labels are manufactured on a high gloss paper stock with pressure sensitive adhesive for ease of application and longer durability. Designed to be used with you in house labeling system where color printing isn't an option.

Make clean, professional looking labels in minutes. Labels are printed in sheets and padded with a cardboard backer for ease of use. Each sheet is perforated to allow removal when completed.

Labels are sold in pads. 1" diameter labels come 1,120 labels per pad. 1/2" diameter labels come 1,820 per pad.

Part Number: 10L-77-1000

Old Part Number: P196227
New Part Number: P196227

2244100 Phosphate Reagent Set (Hach) by AquaPhoenix

For determination of Reactive (Ortho-) Phosphorus (Phosphate) by the Amino Acid Method. Hach Method 8178. Range: 0.23 - 30.00 mg/L PO4. Sample Size: 25 mL Set includes: Amino Acid Reagent and Molybdate Reagent for 100 tests.

Part Number: 10L-434

120085 Individual BNC Attenuator, 20 dB 0.5 Watt by Test Products International

Features

• Increase the input range of an oscilloscope.
• Reduce the output level of fixed amplitude signal sources.
• Connect low impedance sources to instruments with high-impedance inputs.

TK3502-Z Sulfite Test Kit, 1 drop = 2 or 10 ppm as Na2SO3 by AquaPhoenix

EndPoint ID Drop Count Test Kit, Sulfite

1 drop = 2 or 10 ppm as Na2SO3 / 25 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

18523-42 Type T Thermocouple Probe Quick Dis-connector, with Mini-Connector, 6" L, .125 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with 316 Stanless Steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

pH610N Digital Non-Bluetooh, LCD Display pH + Temperature Pocket Tester by Jenco

Waterproof, economical pH/temperature tester with long useful life.

Like its Bluetooth sibling, the Wand Non-Bluetooth Series' main focus is to deliver accurate and repeatable pH and temperature results easily and affordability. This was accomplished by starting Jenco s longest running and very popular tester series and updating it with better electronics for better accuracy, replacing the potentiometer with buttons with tactile feedback and protecting the upgraded internals with an IP67 waterproof housing.

Improved Reading Quality

• 1 point or 2 points calibration
• ±0.05 pH accuracy

Simple Operation

• Clear, large LCD displays pH and temperature
• Button operations with tactile feedback
• IP67 waterproof housing