$400 - $500

6302-0155 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R32, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

• Mobile App Interface
• Pre-calibrated Sensors
• Semi-automated Calibration
• Remote Sensor Option
• Temperature-Compensated Measurement
• Low Temperature Performance
• Digital Communications
• Analog Outputs
• Relay outputs
• Audio & Visual Alarms
• Multiple Cable Entries and Terminals

Benefits

• Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
• Fast and easy sensor maintenance. Eliminates need for calibration gas.
• Easy calibration process with mobile app. Generate calibration certificates for documentation.
• Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
• Mitigates false alarms and optimizes accuracy in refrigeration applications.
• Suitable for use in cold rooms and freezers down to -40° F/C.
• Integrate with local BMS/BAS via Modbus RTU
• For current or voltage output to legacy systems (MGS-450/460)
• 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
• On-board alarm notification supports compliance with ASHRAE 15 / EN 378
• Quick and easy installation of all wiring; daisy-chain power and digital communications.

6302-0160 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R450A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

• Mobile App Interface
• Pre-calibrated Sensors
• Semi-automated Calibration
• Remote Sensor Option
• Temperature-Compensated Measurement
• Low Temperature Performance
• Digital Communications
• Analog Outputs
• Relay outputs
• Audio & Visual Alarms
• Multiple Cable Entries and Terminals

Benefits

• Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
• Fast and easy sensor maintenance. Eliminates need for calibration gas.
• Easy calibration process with mobile app. Generate calibration certificates for documentation.
• Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
• Mitigates false alarms and optimizes accuracy in refrigeration applications.
• Suitable for use in cold rooms and freezers down to -40° F/C.
• Integrate with local BMS/BAS via Modbus RTU
• For current or voltage output to legacy systems (MGS-450/460)
• 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
• On-board alarm notification supports compliance with ASHRAE 15 / EN 378
• Quick and easy installation of all wiring; daisy-chain power and digital communications.

6302-0172 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R455A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

• Mobile App Interface
• Pre-calibrated Sensors
• Semi-automated Calibration
• Remote Sensor Option
• Temperature-Compensated Measurement
• Low Temperature Performance
• Digital Communications
• Analog Outputs
• Relay outputs
• Audio & Visual Alarms
• Multiple Cable Entries and Terminals

Benefits

• Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
• Fast and easy sensor maintenance. Eliminates need for calibration gas.
• Easy calibration process with mobile app. Generate calibration certificates for documentation.
• Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
• Mitigates false alarms and optimizes accuracy in refrigeration applications.
• Suitable for use in cold rooms and freezers down to -40° F/C.
• Integrate with local BMS/BAS via Modbus RTU
• For current or voltage output to legacy systems (MGS-450/460)
• 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
• On-board alarm notification supports compliance with ASHRAE 15 / EN 378
• Quick and easy installation of all wiring; daisy-chain power and digital communications.

*Please note we can only ship RKI products to customers within the United States

ACR-20-C 2 Station, 3/4" PVC Coupon Rack with QR Coupon Holders, Inlet/Outlet Valves, PE Panel Mount, 5 GPM Flow Regulator by Quantrol

Corrosion coupon racks are used to monitor and evaluate the effectiveness of water treatment programs against corrosion in cooling towers as well as chilled and hot water systems. Our racks meet ASTM specifications and are hydrostatically tested prior to shipment. Choose from PVC or black iron in 2 or 4 station configurations.

3/4" Schedule 80 PVC

• Use with chilled or cooling water
• Rated at 120°F @ 125 PSI
• Quick release PVC coupon holders with screw and nut
• Mounted to Polyethylene Panel

3/4" Black Iron

• Use with hot, chilled or cooling water
• Rated at 300°F @ 185 PSI
• Threaded black iron/steel coupon holders with screw and nut
• Mounted to Polyethylene Panel

Part Number: U1005100PA

VK42-50 42" Versa-Kool Circulation Fan, Yoke Mount, 50 Hz by Schaefer

Reduce heat stress and improve air quality with Schaefer's uniquely designed circulation fans. Unrivaled in the market, these fans are engineered to produce greater air movement and superior cooling no matter the application. You don't hear them. You don't see them. You only feel them!

Also known as Horizontal Air Flow (HAF) fans, these fans move air in a coherent horizontal pattern creating a gentle 'racetrack' air flow pattern needed in greenhouses to maximize heat distribution and humidity control by mixing the air, from ceiling to floor.

Features and Benefits

• Deep guard design for unmatched performance, low noise levels and safety without sacrificing airflow
• Matched high quality motors and blades for maximum efficiency
• Powder coated steel guards for increased durability and corrosion resistance
• Hot dipped galvanized guards on VK12-GA and VK20-GA models for even greater rust protection
• Powder coated steel mounting bracket and power cord included
• Wide variety of mounting options available for flexible and easy installation
• Variable speed controls available
• Misting kits available for even greater cooling
• Two year warranty
• Made in the USA

SN1005-J Silver Nitrate, ACS, 100gm by AquaPhoenix

• CAS No. 7761-88-8
• AgNO3 FW=1 69.87

Specifications

• Packaging Type: Poly
• Size: 100 gram
• Grade: ACS

245P12DD 24" Direct Drive Galvanized Panel Fan, 5-Wing, 1 / 2 Hp by Schaefer

Schaefer's galvanized steel panel fans combine low cost, high airflow and high air speeds for very high ROI livestock cooling. These fans are designed for agricultural livestock buildings requiring large volumes and velocities of air with a belt driven preference. Regardless of application, free stall barns, feed lines or holding pens, Schaefer offers a wide variety of galvanized panel fans to meet your specific needs. Ships fully assembled, complete with belt tensioner.

Features and Benefits

• Industry leading airflow and efficiency with airflows up to 40,000 cfm and efficiencies up to 40 cfm/watt
• Lab tested design for maximum performance and quiet operation
• Heavy gauge galvanized and powder coated steel components
• Thermally protected TEAO motors for long life
• Optional post and column mounts available
• Available in 24", 36", 48", 52" and 54" sizes
• 3-wing or 5-wing blade style
• Two year warranty
• Made in the USA

2242600 Nickel Reagent Set (Hach) by AquaPhoenix

For determination of Cobalt and Nickel by the PAN method. Hach Method 8078. Sample Size: 25 mL Range: 0.01 - 2.00 mg/L Co, 0.006 - 1.000 mg/L Ni. Reagent Set includes: EDTA Reagent Powder Pillows, Phthalate-Phosphate Reagent Powder Pillows and PAN Indicator Solution (0.3%) for 100 tests.

TW24HVB-PB 24" Twister Oscillating Circulation Fan, High Velocity, Black OSHA Guards, Black Square Pedestal by Schaefer

When you're tired of replacing damaged pedestals, use Schaefer OSHA compliant portable circulation fans with heavy-duty pedestal mounts, designed to last many years. Schaefer portable circulation fans deliver quiet, powerful, efficient and long lasting air movement. Use these rugged portable fans in warehouses, work areas, loading docks, greenhouses, farms, and other locations where quality matters.

Features and Benefits:

• Square, round or tripod pedestal for portability needs
• Matched direct drive motors and blades for highest achievable levels of airflow, rated up to 12,000+ cfm
• Powder coated steel guards for corrosion resistance and durability
• Energy efficient design for additional cost savings, draws as little as 1.6 amps
• Thermally protected, heavy-duty, maintenance free, 2-speed motors for long life
• Two-speed pull chain
• Ten foot, 115 volt grounded attached cord
• Mist rings available for additional cooling
• Optional wheel kit for square pedestal available by ordering FP-Wheelkit
• Two year warranty
• Made in the USA