$400 - $500

MONGUA Guardian Monitor by Bluelab

See your desired levels of pH, conductivity and temperature - 24/7.

Monitoring your crops 24 hours a day, with the ability to set high and low alarms for each parameter. A flashing display lets you know if your parameters move away from the optimum, allowing you to make the important adjustments quickly and effectively. The large, clear display allows readings to be viewed from a distance.

The Bluelab® Guardian Monitor is mains powered and is either mounted to the wall or hung on a support and probes positioned inside your reservoir / solution.

Probe cable length: 2 meters / 6.5 feet

Features

• Wall mount for continuous viewing
• Plant-safe green LEDs, with adjustable brightness
• Large easy to read displays
• Replaceable double junction pH probe included
• Easy to navigate menu to program & adjust settings
• Selectable conductivity and temperature scales
• No calibration required for conductivity and temperature
• Simple push button pH calibration
• Flashing high and low alarms (non-audible)
• Built with greater tolerance to RF / electronic interference
• International power supply
• Non-volatile memory

18109162-3052 Ventis Slide-on Pump Base, Alkaline battery pack, Black, China Ex, Czech /Italian /Polish /Portuguese /Russian by Industrial Scientific

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis Pro5 Multi-Gas Monitors.

Part Number: U106725PM1

18109162-3191 Ventis Slide-on Pump Base, Alkaline battery pack, High Visibility Orange, INMETRO, English /French /Spanish /German /Chinese by Industrial Scientific

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis Pro5 Multi-Gas Monitors.

Part Number: U1005250PA

GS-AG-B-004-G Gasman Single Gas Monitor, 0-25% Volume Oxygen, Non Rechargable Battery (single use), Spanish ATEX by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

*Please note we can only ship RKI products to customers within the United States

CS675HTTC-K=0.1 Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C

CS675-C-1-DA-3-A-5-H-2 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, TC, 6", 4 Wire, TL, 3/4" by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

4866 33 foot Rotary Viper with 7" Perlon Vrush Head by Wohler

The essential equipment for homeowners and cleaning professionals. The Wohler Rotary Viper Vent M10 makes vent cleaning a breeze. Easy to use, lightweight transport and excellent cleaning results, with the Wohler Rotary Viper Vent you are prepared for the job.

• Clockwise and counterclockwise rotation possible - don't lose your head in the heat of the moment.
• Foolproof and cable-free operation with a conventional cordless screwdriver
• Up to 50 feet long - access every spot in no time at all
• Easy transport and immediately ready for use
• Maximum cleaning success with exchangeable brush heads

Additonal Information

• Wohler Rotary Brush M10 33'
• Perlon brush head 7"

0572 2034 Saveris 2-H1WiFi Data Logger by Testo

The testo Saveris 2 WiFi data logger system is the modern solution for monitoring temperature and humidity values as well as CO₂ concentration in storerooms and work rooms.

Installing the system is child's play, and can be carried out either via a browser, or with the testo Saveris 2 App. The WiFi data loggers reliably record temperature, humidity and CO₂ concentration at adjustable intervals and transmit the measurement values directly by wireless LAN to the Testo Cloud.

The readings stored can be analyzed at any time, anywhere, using an internet-enabled smartphone, tablet or PC. Limit value violations are immediately reported by e-mail, optionally by SMS or via the testo Saveris 2 App as a push notification. This allows critical processes to be kept always under control, even if you are not on site.

The long battery life additionally ensures that the testo Saveris 2 system needs to be serviced only rarely.

• Data transfer by wireless LAN
• All measurement data always available, anywhere, on any instrument
• Alarms when limit values are violated
• With testo Saveris 2 App for easier configuration, push alarms and WiFi range analysis
• Cost-free online data store (Testo Cloud)