$400 - $500

S645KD pH Sensor, Flat, PVDF, Side Stream by Sensorex

Side stream mountings are particularly useful in applications involving oily coating or moderately viscous materials. This mounting hardware allows the velocity past the electrode to be controlled in a predictable manner. In the 3/4 inch flow cell, restricted 1/4 inch flow channel, each GPM of flow provides two ft/sec past the flat electrode's sensing surface. Flow rates of three to five GPM provide adequate cleaning velocities. Exact control of flow rates is not required.

In viscous material applications the above flow rates may be difficult to achieve; however, lower rates still provide flow in shear to assure that fresh material is at the measuring surface.

• Quick disconnect design saves time and money
• Installs in seconds, no tools needed
• Flat surface design resists coating
• CPVC and PVDF construction
• Available with or without ATC elements

9152 RP72 Soot Test Pump by Wohler

• rugged and reliable soot test pump
• long hose, ideal for difficult to reach measurement openings
• non centered soot spot, allows many tests on one filter, easy to compare
• 2 filter technology

Additonal Information

• Wohler RP 72 Smoke Pump
• Hose 3'
• Extraction probe 8.7"
• Smoke spot comparison scale
• Threaded cone
• Oil test bottle
• Maintenance Oil
• Filter papers (300 pcs.)
• Short wadding
• Long wadding
• Probe brush

T4-ZOZA-STANDARD T4 Personal Gas Monitor, 2 Gas - O2, CH4 % LEL, Alternate Alarm Levels / Certifications by Crowcon

T4 integrates innovative safety features and an intuitive, rugged design to provide advanced protection for those working in harsh environments. This portable multigas detector, which is exceptionally easy to use and service, protects against the four most prevalent gas hazards: carbon monoxide (CO), hydrogen sulphide (H₂S), flammable gases and oxygen (O₂) depletion.

Features

• TWA resume function - unique to T4, this innovative feature ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site.
• 18 hour battery life - safely work multiple or longer shifts between charges, covered by the 18 hour battery life.
• Backlit display - large, clear display with backlight and option to flip the screen 180° for easy viewing while worn.
• Rugged design - with a thick anti-shock rubber casing and drop-tested to 13.1 feet on concrete, T4 provides dependable operation under the most demanding use.
• Water & dust-resistant to IP65 & IP67 - provides protection in the harshest environments.
• Dedicated sensors - one sensor for every gas ensures effective, fast and reliable detection.
• Positive safety indicator - a simple 'traffic light' status indicator which, at a glance, provides visual assurance of operational and compliance status to both users and supervisors. Green light - Working safely. Red light - Attention required
• Intrinsically safe - ATEX approved and UL Class 1 Div 1 for safe operation in a wide range of hazardous environments.
• Multiple alarms - audible 95dB alarm, bright red/blue LED's and vibrating alerts provide effective warning to gas hazards.
• Easy operation - large single button and intuitive menu system minimize training and allow easy operation while wearing gloves.

GS-KF-B-073-G Gasman Single Gas Monitor, 0-100% LEL Pentane (unfiltered), Non Rechargable Battery (single use), French Safe Area only by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

WD-18000-29 Temperature/Humidity Data Logger with TraceableLIVE® Wireless Capability and Calibration; 1 Dongle by Digi-Sense

TraceableLIVE Wireless Technology allows multiple users to stay connected and monitor critical environments 24/7 wherever you go.

Remotely monitoring the temperature and humidity of laboratories, warehouses, and incubators has never been easier! Continuous data transmission using Wi-Fi provides a simple and reliable way to wirelessly monitor the environment.

Once setup is complete you can remotely set alarm parameters and generate real-time reports. Data loggers send alerts for temperature alarm, connectivity interruption, and low battery. A convenient built-in bench stand makes it easy to read the temperature and humidity measurements. Select from model with a dongle or model with external probe and cable.

Plus the NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money!

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

*Requires a TraceableLIVE subscription.

A dongle with temperature/humidity sensor, built-in stand, four AAA alkaline batteries, and NIST-traceable calibration certificate with data (for temperature only).

Includes

A dongle with temperature/humidity sensor, built-in stand, four AAA alkaline batteries, and NIST-traceable calibration certificate with data (for temperature only).

Key Features

• Connect to your data via smartphone, tablet, or PC using TraceableLIVE wireless capability*
• View current humidity and temperature conditions anywhere cloud-based interface sends email, text, and push notifications
• No software required web, Android™, Apple® iOS data visibility
• Get accurate, reliable measurements with included NIST-traceable calibration

0554 4201 Air Flow Capture Hood, 12" x 48" for Testo 420 by Testo

Optional 12" x 48" capture hood for use with the testo 420 air flow capture hood, for measurements at air inlets and outlets. Includes an integrated flow straightener for high-precision measurement results, with 11" x 47" inner dimensions.

13940014 Refractometer, Digital Multi-Chek (Farenheit) by AquaPhoenix

The Digital Multi-Chek Fahrenheit accurately and effectively tests coolant both ethylene and propylene glycol. It is dust proof and water resistant (IP65). The Digital Multi-Chek meets ASTM D3321 refractometer method standards for accuracy of ±1 AF.

18109162-3021 Ventis Slide-on Pump, Alkaline battery pack, Black, ATEX/IECEx, English /French /Spanish /German /Chinese by Industrial Scientific

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis Pro5 Multi-Gas Monitors.

610-0138-000 Single-Gas Calibration (Hydrogen Sulfide, 25 PPM, Balance Air), 58 Liters by RAE Systems

Green cylinder technology not only saves the environment, it also saves time and money.

• Gas cylinder size options 34, 58 and 116 liter
• Green Refillable cylinder
• "Strip and Ship" program for easy return of empty cylinders
• Small cylinder footprint
• Cylinder technology offers exceptional gas stability
• All gas cylinders use the same valve

600-0071-030 Methane, 20 Vol% (Balance N2), 103L Steel Cylinder (requires 58L regulator) by RAE Systems

Standard single-gas and multi-gas mixtures for monitor calibration

• Sizes range from 11 liters to 103 liters
• Convenient multi-gas mixtures
• Choose between demand-flow and constant-flow regulators

18109162-3122 Ventis Slide-on Pump Base, Alkaline battery pack, High Visibility Orange, ATEX/IECEx, Czech /Italian /Polish /Portuguese /Russian by Industrial Scientific

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis Pro5 Multi-Gas Monitors.