$400 - $500

WD-35655-04 pH/ORP Electrode Storage Solution, 24 Pack of 500 mL (1-pint) Bottles by Oakton

Solutions to clean, store and fill electrodes

Electrode storage solution keeps pH/ORP electrode bulbs moist for faster, more accurate readings. Use storage solution with electrode saver bottle WD-35805-50 (included with all Oakton 12 mm electrodes) to extend the life of your electrode and maintain accurate readings. Accepts pH electrodes up to 12 mm in dia.

General-purpose pH/ORP electrode cleaning solution removes build-up from electrodes and maintains electrode sensitivity.

Storage and cleaning solutions come in 1 pint bottles.

Use the reference fill solutions with refillable pH electrodes.

• Extend the life of your electrodes and maintain accurate readings
• Use cleaning and storage solution with any pH or ORP electrodes

S01405 Gasmonitor Plus Twin Zone Fire Input Module by Crowcon

Gasmonitor Plus is our flexible microprocessor controlled system designed with a modular approach, so you get exactly what you want.

Used throughout the world, both on and offshore, Gasmonitor Plus provides the cost effective solution to your system requirements. Gasmonitor Plus, the gas and fire control system you can trust.

Simple to use

• Gasmonitor Plus offers flexibility whilst still providing simple operation. All the day to day functions are accessible via push buttons on the front panel.
• As well as a rolling display, indicating the channel currently monitored, each channel has a bar graph display. This unique bar graph format is ranged to indicate readings below the first alarm setting, providing an instantaneous representation of the gas concentration on every detector.
• Common alarm LEDs on the display card and individual alarms on the panel only light when a hazard or fault is detected. This means the whole rack status can be checked at a glance.

Flexible architecture

• Each channel has three levels of alarm as well as a dedicated analogue output, set as 4-20 mA as standard.
• Optional relay modules can interface to the panel to provide up to a total of 84 output relays per rack. Sixteen of these relays can be configured/voted from a combination of the three levels of alarm per channel.
• The RS232 digital interface provides connectivity with PC for configuration, monitoring and datalog upload. Each rack is uniquely addressable, making multi-drop architectures possible. This cuts down on configuration and monitoring cabling.

Ground breaking design

• Gasmonitor Plus is a microprocessor based expandable control system, which can be multiplied to offer unlimited channels and outputs.
• Its modular construction provides ultimate customisation capacity with minimal wiring.
• Gasmonitor Plus has industry standard analogue outputs, and the mechanical design is based on 19 Eurorack. This means that the Gasmonitor Plus will integrate fully with existing rack mounted protection systems on site.
• The alochrome finish and rack screening plates ensure that the Gasmonitor Plus is impervious to radio frequency interferance.

Easy maintenance

• Gasmonitor Plus has been designed with easy servicing and maintenance in mind.
• Each channel is inhibited separately so that plant safety is not compromised during maintenance checks.
• Routine calibration can be achieved from the front panel. The one man calibration feature reduces the service overhead by half.
• One universal gas card architecture controls all gas detectors. This reduces the spares holding required for Gasmonitor Plus maintenance. Each control card is fitted with its own dedicated micro-controller so it can function independently in the event of a single point failure.

10076723 Altair Pro Single-Gas Detector - Carbon Monoxide (CO) Fire by MSA

When working in settings with hazardous gases or fluctuating oxygen levels, the available gas detection devices can be detrimental to health and safety. Workers in these situations need a gas detection unit that is reliable, accurate, safe, and cost efficient. Altair Pro Single-Gas Detector is built to the superior safety and quality standards of MSA and is available worldwide.

Rough and tough exterior

Design simplicity

Altair Pro Single-Gas Detector standard features

The Altair Pro Single-Gas Detector is also compatible with the Remote Oxygen Detector application. The remote oxygen sensor is designed to be lowered into remote locations by a 10 foot cable and monitor oxygen levels, further reducing unnecessary risk. The Pro Single-Gas Detector is also compatible with many other MSA products. For testing and calibration, the Altair QuickCheck Station provides an easy and cost-efficient way to perform daily tests for gas monitoring and alarm functioning. For more complete and automatic calibration and record-keeping, use the Altair Galaxy Automated Test System.

Specifications

SX823-B Portable pH/Conductivity Meter by Apera

The Apera Instruments SX823-B Portable Multi-Parameter Meter measures pH (ORP)/conductivity/TDS/temperature at the same time, easy display switch among pH (ORP)/Conductivity/TDS (ORP electrode sold separately). Accuracy: ±0.01 pH; ±1% F.S; ±0.5°C. Range: -2.00-19.00 pH; Conductivity: 0~200 mS/cm (divided into five ranges): (0.00~19.99) μS/cm, (20.0~199.9) μS/cm, (200~1999) μS/cm, (2.00~19.99) mS/cm, (20.0~199.9) mS/cm; TDS: (0~100) g/L. This meter features auto calibration with buffer recognition (1-3 points), auto temperature compensation (0-100°C), high accuracy/consistency, and quick response time thanks to the digital filter technology and auto stable readings recognition (adjustable stable criterion and optional auto-hold function). Plenty of intelligent functions such as indications of completed calibrations, self-Diagnosis of out-of range value and electrode invalidation, auto power-off, easy parameter setup, etc. Reliable structure design: large LCD screen with white backlit, foldable stand allows use as a benchtop meter, soft silicon case gives you a nice grip, IP57 waterproof and dustproof, great for field use. Great value: comes with a complete kit a SX823-B meter, 1 piece of 201T-Q 3-in-1 pH Electrode, 1 piece of 2301T-Q Conductivity Electrode, 4 bottles of calibration solutions (4.00/7.00, 1413?S /12.88mS), connector protection caps, AA backup batteries, a brief operation manual-all in a rugged portable carrying case. The meter is CE certified and comes with a 2-year warranty (6 months for electrode).

• Auto calibration with buffer recognition, Auto Temp. Compensation, Testing pH (ORP)/Conductivity/TDS/Temp. simultaneously
• High accuracy and consistency, quick response thanks to the digital filter technology and auto stable readings recognition (optional auto-hold function)
• Intelligent Functions: easy display switch among pH/Conductivity/TDS, Easy parameter setup, Self-Diagnosis of out-of range value and electrode invalidation
• Reliable Structure Design: Large clear LCD display, foldable stand allows use as a benchtop, soft silicon case gives you a nice grip, IP57 waterproof
• Complete kit of pH/EC electrodes, calibration solutions, soaking solution, and backup batteries, and a rugged portable case

*Please note we can only ship RKI products to customers within the United States

Measuring Range: -100 to +400 °C

CS675HTTC-K=0.1 Stainless Steel High Temperature Conductivity Sensor (3/4") by Sensorex

Heavy-duty industrial and boiler conductivity sensors with 316 stainless steel construction for use in 3/4" NPT openings. Featuring thermally-resistant PEEK insert and high temperature sealing rings for demanding applications. Supplied with 6" PTFE coated leads for junction box connection and extension (not included). For use with CX3000 Online Conductivity Transmitter/Controller for boiler applications or CX2000 Online Conductivity Transmitter/Controller for industrial control of conductivity and total dissolved solids (TDS).

Features:

• Heavy duty electrodes for boiler applications
• Available with ATC for most makes and models of conductivity transmitters or controllers
• 0.1, 1.0 and 10.0 cell constants available
• Suitable for use in temperatures up 200°C

CS675-C-1-DA-3-A-5-H-2 CS675 High Temp & Pressure Stainless Steel Contacting Conductivity Sensor, K=1.0, TC, 6", 4 Wire, TL, 3/4" by Sensorex

The Sensorex CS675 High Temperature and Pressure Stainless Steel Contacting Conductivity Sensor is ideal for heavy duty applications. It is made from 316 Stainless Steel and PEEK. It features a single body design intended for high pressure conditions. This sensor also has 2 cell constants (0.1/cm and 1.0/cm). It features 3 options for temperature and pressure ratings ranging from standard to ultra-high (see more details in specification sheet). It also has 2 options for insertion lengths. Certain configurations of this product can be purchased directly from the website. Please contact us to purchase any configurations not shown in the drop down menus above.

Ideal for Heavy Duty Applications

• Made from 316 Stainless Steel and PEEK
• Robust single body design

Multiple cell constants. temperature/pressure ratings and insertion lengths

• 2 options for cell constants: 0.1/cm and 1.0/cm
• 3 options of increasing temperature and pressure ratings
• 2 options for insertion lengths: standard and extended

24CFO 24" Circulation Fan, White OSHA Guards by Schaefer

Schaefer OSHA compliant circulation fans meet all OSHA safety regulation while delivering maximum airflow. These 2-speed fans have the versatility to be mounted on a ceiling, wall, pedestal or cart, which makes them the ideal cooling solution for any commercial, industrial or agricultural facility.

Features and Benefits

• Matched direct drive motors and blades for highest achievable levels of airflow, rated up to 12,000 cfm
• Powder coated steel guards for corrosion resistant and durability
• Energy efficient designed for additional cost savings, draws as little as 1.6 amps
• Thermally protected, heavy-duty, maintenance free, 2-speed motors for long life
• Two year warranty
• Made in the USA

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

GS-KF-A-067-G Gasman Single Gas Monitor, 0-100% LEL Pentane (unfiltered), Rechargable Battery, N American Safe Area only by Crowcon

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a Rechargeable battery battery or up to 2 years on a non-Rechargeable battery.

4866 33 foot Rotary Viper with 7" Perlon Vrush Head by Wohler

The essential equipment for homeowners and cleaning professionals. The Wohler Rotary Viper Vent M10 makes vent cleaning a breeze. Easy to use, lightweight transport and excellent cleaning results, with the Wohler Rotary Viper Vent you are prepared for the job.

• Clockwise and counterclockwise rotation possible - don't lose your head in the heat of the moment.
• Foolproof and cable-free operation with a conventional cordless screwdriver
• Up to 50 feet long - access every spot in no time at all
• Easy transport and immediately ready for use
• Maximum cleaning success with exchangeable brush heads

Additonal Information

• Wohler Rotary Brush M10 33'
• Perlon brush head 7"

0572 2034 Saveris 2-H1WiFi Data Logger by Testo

The testo Saveris 2 WiFi data logger system is the modern solution for monitoring temperature and humidity values as well as CO₂ concentration in storerooms and work rooms.

Installing the system is child's play, and can be carried out either via a browser, or with the testo Saveris 2 App. The WiFi data loggers reliably record temperature, humidity and CO₂ concentration at adjustable intervals and transmit the measurement values directly by wireless LAN to the Testo Cloud.

The readings stored can be analyzed at any time, anywhere, using an internet-enabled smartphone, tablet or PC. Limit value violations are immediately reported by e-mail, optionally by SMS or via the testo Saveris 2 App as a push notification. This allows critical processes to be kept always under control, even if you are not on site.

The long battery life additionally ensures that the testo Saveris 2 system needs to be serviced only rarely.

• Data transfer by wireless LAN
• All measurement data always available, anywhere, on any instrument
• Alarms when limit values are violated
• With testo Saveris 2 App for easier configuration, push alarms and WiFi range analysis
• Cost-free online data store (Testo Cloud)

18109162-3072 Ventis Slide-on Pump Base, Alkaline battery pack, Black, GOST-R, Czech /Italian /Polish /Portuguese /Russian by Industrial Scientific

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis Pro5 Multi-Gas Monitors.

*Please note we can only ship RKI products to customers within the United States